ETOOFILEYSHB

for hardwood, softwood, vinyl, nylon, plaster, chalk, chipboard, linoleum, rubber, thermalite, fiberglass

ETOOFILEYSSB, 716Y1

ideal tool for file work, black metal body, sturdy yellow plastic handle
74-00888

With sharp drill point, pre-drilling not necessary. Conically increasing cutting edges and radially relief ground circumference for a paring cut. With scale in the flutes. Three drive flats on the shank.
Set of 3 conical sheet and tube drills and 1 cutting compound No. 118160 in a case.
Leaves no burr or chatter marks.
Sheet metal 0.1 − 2 mm, stainless steel 0.1 − 1 mm, non-ferrous metals: 0.1 − 5 mm, plastics up to 10 mm.
1x each taper sheet and tube drill: Size 3 -14; 8 − 20; 16 − 30.5

Countersink sets, in a case.
Practical set for assembly and workshop use.
Content table use:
1× each countersink: Size 6; 8; 10; 11.5; 15; 19
Number of countersinks: 6
Countersink tip angle: 90 degrees
Tool material: HSS
Number of cutting edges Z: 3

HSS, 19 pieces, D 1 to 10mm by step of 0.5mm

HSS, 25 pieces, D 1 to 13mm by step of 0.5mm

Strong head, laid-on joint. Jaws chemically blacked, polished head, plastic coated handles. Cutting edges induction hardened (approx. 61 HRC).
Standard: DIN ISO 5748
Material: Special tool steel, drop-forged, and oil-hardened.
overall length: 180 mm
Cutting capacity soft wire up to ⌀4 mm
Cutting capacity hard wire up to ⌀2.5 mm
ETOOPLIEDAC180

Strong head, laid-on joint. Jaws chemically blacked, polished head, plastic coated handles. Cutting edges induction hardened (approx. 61 HRC).
Standard: DIN ISO 5748
Material: Special tool steel, drop-forged, and oil-hardened.
overall length: 200 mm
Cutting capacity soft wire up to ⌀4 mm
Cutting capacity hard wire up to ⌀2.8 mm

Serrated jaws. Cutting edges additionally induction hardened (approx. 64 HRC); suitable even for piano wire.
Jaws bright finished, plastic coated handles.
Standard: DIN ISO 5746
Material: Chrome vanadium steel, drop forged.
overall length: 160 mm
Cutting capacity hard wire up to ⌀: 2 mm
Cutting capacity piano wire up to ⌀: 1.5 mm
Jaw characteristics: inner face serrated
Handle: plastic coated
Manufacturing process: Cutting edges induction hardened (approx. 64 HRC), pliers body drop forged
Material: Chrome vanadium steel
ETOOPLIEUN160EC
74-00871

Considerable cutting performance with little effort. Serrated jaws. Cutting edges additionally induction hardened (approx. 63 HRC); also suitable for piano wire.
Jaws chemically blacked, polished head, plastic coated handles.
overall length: 225 mm
Cutting capacity hard wire up to ⌀3mm
Cutting capacity piano wire up to ⌀2.5 mm

Box joint (= double guides). Designed to prevent fingers being trapped. Induction hardened. Notched serrated jaws, adjustable in stepped holes. Multi-position ratchet adjustment.
Red powder-coated, polished jaws and joint.
Standard: DIN ISO 8976
Material: Chrome vanadium steel, drop forged.
overall length: 250 mm
Hexagon across flats: 36 mm
Jaw capacity for pipes: 1.1/2 inch
ETOOPLIEMU25
74-00785

Designed for Orthopedics workshops
Manual height adjustment, milling shaft horizontally and vertically
adjustable, continuous speed control, M.16 milling shaft thread, adapter from M.16

Dimension : Out Side W.50—D.50—H.40 cm
Power Supply 220 Volt 50 Hz
Power cord With CEE plug 3 × 16 A and CEE socket 3× 16 A
Sound intensity level 80 dB(A)
Electrical connection 220 V 50 Hz 1500 Watt
Motor RPM Variable rotation speed, min. 0 to max. 3000 RPM
Connecting cable 3x2,5 mm2 3 mt
Router shaft length and Type 500 mm 30 to 35 mm ( Conic 220 mm )
Suction head hose 100 mm plastic ,flexible
Scope of delivery Exhaust arm with suction hood (Ø 100 mm +hose )
Color Rall 7035 & 7045
Weight Net 42 Kg

high-quality masking tape for painters, plasterers and bodywork painters, up to 80°C, well-impregnated reinforcement or very good resistance to re-sanding, also ideal for dispersion paints

Technical characteristics
Radius of curvature (middle tube): 45; 50; 65; 100; 130; 150; 200mm
Maximum thickness: 5.5 mm
Max bending angle: 90 degree
For nominal pipe sizes: 3/8 – 2 inch

Heavy-duty hydraulic tube bender with closed hydraulic system and return spring for better piston control. Cast iron pads and shapes, powerful piston delivering a pressure of 450 bars. High quality piston seals prevent leakage and increase service life. Skates with bending angle indication. Safe bending of tubes thanks to closed flange. The special design of the lever ensures protection against overloads. Delivery in a resealable wooden box.

Use:
For bending galvanized and black steel tubes as well as gas tubes (3/8 inch − 2 inch). Max. bending angle 90°, tubes max. 5.5 mm thick (2 inch tubes). Easy actuation thanks to the long piston stroke with each pump. Universal use in mechanical engineering, for work on pipeline systems, locksmithing, etc.

Content:
1 form of each: Ref. 3/8; 1/2; 3/4; 1; 1.1/4; 1.1/2; 2
Skate 2 pc.
Hydraulic tube bender: 1 pc.
Wheels: 3 pcs.

The 3M™ GPT-020F double-sided tape is characterized by high moisture resistance, very high immediate adhesion, excellent shear strength, even at high temperatures, as well as good UV resistance.

1000x1000x2mm, 15-18 Shore A

The new IR1001 COMPACT is of course equipped with the innovative optical temperature sensor and a con- troller of the next generation. Same as the larger Infrared-ovens the two-line PID-Controller keeps the user constantly updated of the preset and actual temperature values. The preselect feature allows the user to store four temperature settings which can be easily called up by use of a single button. A signal light informs the user when the set temperature is reached, even if he is not standing right in front of the control panel.

Technical Data: IR1001 COMPACT
Type: IR1001 COMPACT - Infrared Oven for the O&P field, Bench-top design
Footprint: approx. 1m²
Dimensions: Outside: W 1270 mm - D 920 mm - H 455 mm / Inside: W 1000 mm - D 800 mm - H 140 mm
Tray: tray movable full size on ball bearing guides, easy to remove without tools for fast teflon replacement, effective heating area: W 950 x D 750 mm
Power supply: 400V / 50/60Hz / 3 Phase / (16 Amp. CEE) / total capacity 7,7 kW, (other voltages available)
Heating: 12 Infrared-Quartz-tubes with reflector, Stand-by switch
Temperature control: opto-electronic IR-measuring unit, Measuring of the material´s surface temperature!
Temperature control: PID-Controller, infinitely variable from 30°C to 250°C

Technical Specifications:

Product Type: Soldering Iron
Power Supply: Mains operation
Tip Width: 3.1 mm
Heating Power: 30 W
Tip Temperature after 3 minutes: 380 °C
Suitable for copper sections up to: 2.5 mm²
Weight without power cord: 80 g
Identification and Classification Numbers:

EAN / GTIN: 4003008047004
Manufacturer's Reference: 0330KD
Description:
This industrial soldering iron is designed for exceptional longevity, equipped with Ersadur long-life tips that last 30 times longer than standard copper soldering tips. It heats up in 3 minutes, features a 1.5 m rubber power cable (ref. 30 uses PVC), and comes with a detachable iron stand (not included with ref. 30). The Ersa soldering iron also includes a clip-on iron stand for convenient and safe use.

MOLD MAX™ RTV silicone rubbers will reproduce the finest detail and are suitable for a variety of industrial and art related applications including making molds for reproducing prototypes, furniture, sculpture and architectural elements. MOLD MAX™ silicones can also be used to cast a variety of materials including wax, gypsum, low melt alloys/metals and urethane, epoxy or polyester resins (without using a release agent).

Two separate vacuum circuits with six vacuum pickup locations, three gate valves for vacuum control, six external filters, two external water tanks, water tank also serving as a vacuum reservoir, touchscreen with timer, alarm function and warning signal for full water tank, with protective film for touchscreen 755Z44.
Dimensions W x D x H: 430 mm x 386 mm x 208 mm
Adjustable vacuum: 220 mbar (=78%)
Suction volume: 25 l/min

- Heavy professional design with high dead weight for maximum smoothness Especially quiet and precise running thanks to torsion-free machine housing
- Large dimensioned cast iron saw table, one piece, swiveling from 0 ° to + 45 ° with ground and polished surface - Patented table tilt device with handwheel and rack
- Sägebandschnellspannung
- Precision Sägebandrollenführung
- Large font rip fence
- Fast and precise cutting height adjustment via handwheel and rack with millimeter scale Safety switch for automatic shutdown when opening the door
- Large font rip fence
- Standard with angle stop
- Table tilt via rack and handwheel

also referenced under: HBS 533 S

with rolling stand, 230V 400W

Usage:
Designed for vacuuming chips generated from milling, planing, and sawing processes, offering improved machine efficiency and ensuring user health.

Main Features:

Fan impeller for high suction power.
High mobility thanks to standard driving equipment.
Easy fixing of bags with straps.
Dimensions and Weight:

Length: approx. 1450 mm
Width/depth: approx. 800 mm
Height: approx. 2000 mm
Net weight: approx. 48 kg
Extraction Duct Information:

Inlet nominal diameter: 150 mm
Outlet nominal diameter: 3 x 100 mm
Electrical Data:

Supply voltage: 230 V
Mains frequency: 50 Hz
Motor input power: 2.2 kW
Motor output power: 1.55 kW
Volume Flow:

Rated volume flow: 3910 m³/h
Maximum negative pressure: 1950 Pa

This pneumatic jigsaw is the ideal tool for professionals seeking performance, precision, and ease of use. Designed for demanding applications, it offers exceptional power and innovative features, suitable for a variety of materials.

Key Features:
Outstanding Cutting Performance:

Cutting depth in wood: 85 mm
Cutting depth in plastic: 30 mm
Cutting depth in mild steel: 10 mm
Cutting depth in aluminum and non-ferrous metals: 15 mm
Power and Efficiency:

High cutting speed at 2,200 strokes/min.
Output power of 400 W for clean and precise cuts.
Optimized air consumption at 17.5 l/s under load.
Ergonomic and Practical Design:

Lever switch for easy control and intuitive use.
SDS system for quick, tool-free blade changes.
Secure guidance with a mushroom handle for precise and comfortable handling.
Lightweight at only 1.9 kg to reduce fatigue during prolonged use.
Compatibility and Durability:

Thread size: 1/4"-NPT.
Required inner hose diameter: 10 mm.
Compact dimensions for easy storage: 210 x 280 x 85 mm.

The 1m4 monofilament is an essential tool for neurological diagnostics, ideal for medical practices and clinics. Designed to detect nerve damage, it also features a metal element for assessing heat sensitivity. Compact and practical, it folds easily to protect its sensitive tip and fits conveniently in a pocket.

Key Features:

Usage: Neurological diagnostic tool for detecting nerve damage.
Additional Functionality: Heat sensitivity assessment via integrated metal element.
Ergonomic Design: Folding mechanism to protect the tip and ensure portability.
Easy Maintenance: Quick and hygienic cleaning.
Durable Materials: Made from ABS and PVC plastic for longevity.
Technical Specifications:

Dimensions: Length 14.5 cm, diameter 1.2 cm.
Weight: Ultra-lightweight, only 15 g.
Material: High-quality ABS and PVC plastic.

The ECO-Friendly Laminating Resin for Elevated Vacuum Systems

Discover ECO-Extreme Resin, the environmentally friendly resin specially designed to seal laminating materials with unmatched efficiency. Perfect for creating airtight sockets in elevated vacuum suspension systems, this resin offers superior strength and ease of use.

Key Features
Eco-Friendly Formula: Free from hazardous air pollutants like styrene and methyl methacrylate, making it safe for both the user and the environment.
Enhanced Strength: Provides a significant increase in flexural strength for thin and rigid laminates compared to standard resins.
Airtight Sealing: Designed for elevated vacuum suspension systems, ensuring a perfect seal.
Fast and Easy Curing:
Cure time: 10-12 minutes at room temperature.
Heat-free curing technology for tack and fuzz-free results.
Practical Packaging:
Available in 4-gallon boxes (15.14 liters) with no Hazmat fees.
Comes with a paste promoter for convenience.
Extended Shelf Life: Up to 1 year for lasting reliability.
Elevate your laminating process with ECO-Extreme Resin – the resin that combines strength, efficiency, and sustainability.

Dimensions (WxDxH): 300 x 600 x 1100 mm
Weight: 55,000 kg
Description: Clear height 450 mm, without milling cushion

ETOOKEYSAM02

A powerful and ergonomic tool, this pneumatic riveter ensures fast and efficient riveting on steel, aluminum, and stainless steel. Its lightweight design (1.3 kg) and high-performance jaw system guarantee a firm and durable grip.

🔧 Features:
✔ Pulling force: 4,200 N | Stroke: 15 mm
✔ Operating pressure: 5 – 7 bar | Air consumption: 1 L/rivet
✔ Compatible with blind rivets:

All materials: Ø 3.2 mm
Steel/aluminum: Ø 4 mm
🔥 Benefits:
✔ Dual-use air system → Reduced air consumption
✔ Fast work cycle → Optimized productivity
✔ Removable nail collector → Clean and safe work
✔ Ergonomic and lightweight → Comfortable handling

📦 Included:
🔹 Mounting wrenches 12/14 and 14/17
🔹 Hydraulic oil bottle (100 ml)
🔹 Nosepieces: 17/18, 17/20, 17/22

The very popular gravity-feed spray gun with round and flat jet, metal gravity cup, stainless steel nozzle, air consumption 200 - 350 l/min at 3-4.5 bar.
Application: Proven spray gun for universal use.

Power Input:

Compatible with AC/DC input
230 V AC
Features:

CE compliant
Timer DS control with integrated electronic timer (0-99.59 hrs) and continuous operation
Packaging:

Sold in packs of 1 unit
Operating Parameters:

Temperature range: 10°C above room temperature up to 300°C
Internal Chamber Capacity:

Volume: 259 L
Internal Dimensions:

L × W × H: 515 mm × 650 mm × 780 mm
Width × Depth × Height: 650 mm × 515 mm × 280 mm
Weight:

87 kg

1 x for leg lasts up to 300 mm (right)
1 x for leg lasts up to 450 mm (left)
Includes 1 full cushion and 1 semi-high ortho-cushion
Equipped with air connection, pressure reducer, and manometer, compressed air filter
WBI 180/18 oil-free compressor unit
220-230 Volt, 1 Ph, 50 Hz
2m cable, plug, and motor with motor protection switch
Paint finish: RAL 7035/7037 = Light Grey / Dark Grey

Heavy, solid cast construction
Dirt and water resistant, easy to clean membrane keypad
Electronics 24V DC
Electrical quill feed
Depth stop
Threading attachment
Machine light integrated in the drill head
Large, height-adjustable protective screen with safety switch for maximum protection of the user
Large dimensioned, solid drill table, precisely worked with parallel T-slots and circumferential cooling water channel, strongly ribbed on the back, tiltable ± 90 ° sideways
Motorized rotary table height adjustment
Coolant system and external coolant tank can be removed for easy and complete emptying
Chip filter according to Machinery Directive
Extremely stable, thick-walled cast-iron column for high power consumption
Solid base plate with parallel T-slots, precision surface finish
Optional foot switch for switching between clockwise and anticlockwise rotation and for thread cutting

Integral stainless steel worktop with wooden reinforcement
Integral chrome steel design
Height adjustable feet
Item delivered in spare parts to assemble yourself
Working height 850 mm
Large load capacity
Particularly high stability
Square feet profile
Easy cleaning
Dimensions (W x D x H): 1200 x 600 x 850 mm

Rating Power: 80kVA
Input voltage variation: ±20%
Input voltage range: 320-480V
Max input current: 144A
Output voltage: 400V
Rated output current: 115A
Efficiency: >98%
Adjustment speed: 12ms/V
Weight: 510Kg
Dimensions: 600x800x1800mm
Voltage stabilisation: Independent phase control
Selectable output voltage: 220-230-240V (L-N) / 380-400-415V
(L-L)
Frequency: 50Hz ±5% or 60Hz ±5%
Output voltage accuracy: ±0,5%
Admitted load variation: Up to 100%
Admitted load imbalance: 100%
Cooling: Up to 45kVA ±15% natural ventilation
Ambient temperature: -25/+45°C
Storage temperature: -25/+60°C
Max relative humidity: <95% (non condensing)
Admitted overload: 200% 2min.
Harmonic distortion: None introduced
Colour: RAL 7035
Instrumentation: Output digital multimetre
Protection degree: IP 21
Installation: Indoor
Overvoltage protection: Output class II surge arrestors