• Hammers
  • Abrasive
  • Knives
  • Orthopedic tools
  • Scissors
  • Scewdrivers
  • Pliers
  • Wrenches
  • Files, Rasps
  • Saws
  • Drill bit
  • Measuring tools
Whisk, 500mm
Wire thickness: 2.4mm, 8 wires
Register to see prices 0.0 USD
Spatula, 30mm, wooden handle
Elastic paddle in stainless steel strip, flat ovoid wooden handle.
Register to see prices 0.0 USD
Register to see prices 0.0 USD
Register to see prices 0.0 USD
Dressing apparatus for bench grinder
Robust and handy wooden handle. A solid metal cage prevents the projection of abrasive grains and sparks.
Use
For sharpening or rough dressing of grinding wheels.
Register to see prices 0.0 USD
Register to see prices 0.0 USD
Cylinder brush Steel wire
Internal brushes with galvanised twisted wire core and plain helix of bristles.
Helical brush section of waved steel wire.
Overall length 300 mm, brush section length 100 mm.
Application:
For manual cleaning and deburring of pipes, bores etc.
Register to see prices 0.0 USD
Digital three-point internal micrometer
Borematic quick blind hole micrometer for 3-point internal measurement. Large LCD display with 11 mm character height for clear and error-free reading. Display can be rotated 330°. The measuring probes centre the micrometer automatically in the bore and ensure easy handling. The measuring probes are adjusted without any error by a carbide cone.
Anvils of titanium-coated hardened steel.
Advantage:
Very quick measurement with high repetition accuracy due to pistol grip and constant measuring force.
Function:
Data storage button saves the measurement result (for instance in inaccessible measurement positions).
Zero point / absolute size enables zeroing at any position.
Good / Reject display for easy checking against tolerance values.
Quick adjustment for quick spanning of the distance to be measured.
Register to see prices 0.0 USD
Abrasive cloth economy roll
Densely woven cotton cloth evenly spread with synthetic resin bonded Aluminium Oxide (A). Very good grit bonding, high abrasion performance and long service life.
Type VSM KK 114 F: Brown fabric, for extremely demanding applications. This grade is particularly supple, resistant to oil and petroleum and can be torn in longitudinal direction to yield clean edges without fraying.
Packaging tape with integral tear-off cutter.
Application:
Predominantly for rubbing down metals by hand, but also suitable for all other materials.
Register to see prices 0.0 USD
Spirit level with magnet 250mm
Handy small spirit level. Die-cast aluminium profile. Face-milled measuring faces. Unbreakable acrylic vials (vertical + horizontal).
Additionally 360° rotating vial. Vee groove and magnet in the measuring face.
Register to see prices 0.0 USD
Register to see prices 0.0 USD
FACOM® screwdriver set, 12pcs
6 slotted screwdrivers 2.5 x 75, 3.5 x 100, 4 x 100, 5.5 x 125, 6.5 x 150, 8 x 175 and 2 PH cross-head screwdrivers no. 1 + 2
Register to see prices 0.0 USD
Combination pliers FACOM, chrome-plated, Overall length: 180mm
Overall length: 180mm
Piano wire cutting values ​​up to ⌀: 2 mm
Standard: DIN ISO 5746
Material: Chrome vanadium steel
surface: chrome
spark-free: no
EAN/GTIN: 3662424087257
Manufacturer number: 187A.18CPE
Execution:
Chrome vanadium steel, chrome-plated head and joint, with heavy-walled covers on handles. Serrated jaws. Plastic opening spring that reduces fatigue. Induction hardened cuts (approx. 64 HRC), also suitable for piano wire.
Register to see prices 0.0 USD
Grinding wheel for bench grinder, diam. 200mm, grit 80
Outer diameter: 200mm
Width: 30mm
Bore: 32mm
Abrasive material: normal corundum
Grain size: 36
Register to see prices 0.0 USD
Grinding wheel for bench grinder, diam. 200mm, grit 36
Outer diameter: 200mm
Width: 30mm
Bore: 32mm
Abrasive material: normal corundum
Grain size: 36
Register to see prices 0.0 USD
Hexagon key L-wrench spherical set 8pc
L-form shaft; ball point can be applied up to an angle of 30°.
PB Swiss Tools special steel combining maximum hardness with exceptional toughness. Surface nickel-plated and chrome-plated, edges slightly chamfered.
Content:
1 each L-wrench: Size 1.5; 2; 2.5; 3; 4; 5; 6; 8
Presented in: Plastic clip
Register to see prices 0.0 USD
Carbide-tipped multi-purpose drill set 7pc
Version:
Multi-purpose drill with especially sharp carbide insert for precise holes in different materials. Large-volume helical flute for quick removal of dust and chips. Shank of annealed special steel.
Application:
For drilling various materials, including in a single operation:
Bricks, porous concrete, lightweight materials, plastics.
Tiles, ceramics, marble, glass.
Metal and material combinations in a single operation, such as when fitting windows or when reinforcing concrete.
Content:
1 each drill Size. (⌀) 4; 5; 6; 6; 8; 8; 10
Note:
Caution: only for rotary use (without hammer action!)
Faster drilling and more holes per battery charge than with hammer drill bits.
Register to see prices 0.0 USD
Countersink set in a case 90°, 17pcs
Countersink sets, in a case
Practical set for assembly and workshop use.
Content table use:
1× each countersink: Size 4,3; 5; 6; 6,3; 7; 8; 8,3; 10; 10,4; 11,5, 12,4; 15; 16,5; 19; 20,5; 23; 25
Number of countersinks: 17
Countersink tip angle: 90 degrees
Tool material: HSS
Number of cutting edges Z: 3
Register to see prices 0.0 USD
Extension, 3/8 inch extra long, 305mm
Square drive: 3/8 in
Total length: 305mm
Register to see prices 0.0 USD
T-handle, 3/8 inch 200 mm
Square drive: 3/8 in
Total length: 200mm
Register to see prices 0.0 USD
Heavy-duty end cutter 160 mm
Strong head, laid-on joint. Jaws chemically blacked, polished head, plastic coated handles. Cutting edges induction hardened (approx. 61 HRC).
Standard: DIN ISO 5748
Material: Special tool steel, drop-forged, and oil-hardened.
overall length: 160 mm
Cutting capacity soft wire up to ⌀4 mm
Cutting capacity hard wire up to ⌀2.5 mm
Register to see prices 0.0 USD
Paper and fabric scissors 200mm
Strong, very long, and slim blades; fully nickel-plated. Made of stainless steel.
Paper, fabric, thin material, and much more.
overall length: 200 mm
Register to see prices 0.0 USD
Crimping tool for 6mm2 end sleeves
Total length: 205mm
For conductor cross section: 0.5 mm² - 6 mm²

Execution:
Steel body with reduction system. Exact achievement of the defined crimping forces thanks to the integrated automatic clamping.
Economic model. Lateral introduction of the tips.
Register to see prices 0.0 USD
Tap wrench, M4-M12
With hardened jaws and steel handles. Possibility of removing a handle to allow use in confined spaces.
For normal use: cast zinc body.
Register to see prices 0.0 USD
Square file Cut 1 (coarse cut) 250 mm
The blanks are forged and ground; manufactured with an exact cut of even density and depth using special machines. These non-convex files have tooth profiles appropriate to each grade of file.
Cuts on all faces; convex end.
The quality file for workshop use with long tool life and high removal rate.
Standard: DIN 7261 form D
Length without tang: 250 mm
Width: 10 mm
Register to see prices 0.0 USD
Set of wood drill bits HSS-G 8pcs. / 3-10mm
high-quality HSS drill bits for woodworking, have a special geometry and transport even wet wood chips perfectly out of deep holes, ideal for precise and clean holes in European and exotic hardwoods, coated and uncoated chipboard
Register to see prices 0.0 USD
Die 6g M3
Closed, pre-stretched line. ≥ M3 with GUN entry on both sides for easy threading and clean chip evacuation in the cutting direction. Entry on 2 nets. Ground and nitrided, rake angle approx. 15 °.
Thread size: M3
Thread Type: M
Side angle: 60 °
Tool type: HSS E
Tolerance class: DIN 13 6g
Cutting direction: straight
Pitch: 1.5mm
⌀ outer: 30mm
Height: 11mm
Register to see prices 0.0 USD
Die 6g M12
Closed, pre-stretched line. ≥ M3 with GUN entry on both sides for easy threading and clean chip evacuation in the cutting direction. Entry on 2 nets. Ground and nitrided, rake angle approx. 15 °.
Thread size: M12
Thread Type: M
Side angle: 60 °
Tool type: HSS E
Tolerance class: DIN 13 6g
Cutting direction: straight
Pitch: 1.5mm
⌀ outer: 30mm
Height: 11mm
Register to see prices 0.0 USD
Moment screw clamp 800 mm
High quality malleable cast iron clamping arms; strong prismatic steel slide beam, knurled, electro-galvanised. Low friction steel spindle, burnished with trapezoidal thread and movable jaw. Instant (high speed) adjustment, reliable clamping. Up to size 400 with plastic protective cover on the clamping jaw, from size 500 onwards without protective cover.
Standard: DIN 5117
Cross section of the slide rail: 35×11 mm
Throat: 120 mm
Jaw capacity: 800 mm
Register to see prices 0.0 USD
Bench vice 140mm
Made entirely of forged steel − guaranteed unbreakable.
Opens forward. With forged pipe jaws underneath the normal jaws
Register to see prices 0.0 USD
Engineer’s hammer with handle protection collar 400g
With hickory handle ergonomic shape, varnished.
Hammer head drop forged and ground to size. Carefully hardened and tempered. Head painted, face and peen bright finished.
With nylon handle protection sleeve. Size 200−1000 additionally with forged-on handle protection collar.
Register to see prices 0.0 USD
Nut driver, for hexagonal nut, 6mm
Multi-material handle with optimized grip area in terms of torque and comfort. Chrome-vanadium steel blade, chrome-plated
Register to see prices 0.0 USD
Nut driver, for hexagonal nut, 4mm
Multi-material handle with optimized grip area in terms of torque and comfort. Chrome-vanadium steel blade, chrome-plated
Register to see prices 0.0 USD
Register to see prices 0.0 USD
Crimping tool for terminal sleeves
Body drop forged. Jaws chemically blackened, head bright polished. Notched jaws for crimping terminals to DIN 46228.
Plastic coated handles.
Register to see prices 0.0 USD
Register to see prices 0.0 USD
Register to see prices 0.0 USD
Hand vice 120 mm
Forged steel; wide jaws with prism. Reinforced shank with secure hinge guide and enclosed special spring. Spindle with trapezoidal thread and strong butterfly nut.
overall length: 120 mm
Jaw width: 45 mm
Jaw capacity: 22 mm
Register to see prices 0.0 USD
Saw sharpening vise, 150mm
Stamped steel
Width of the jaws: 40mm
Register to see prices 0.0 USD
Register to see prices 0.0 USD
Register to see prices 0.0 USD
Spare spring
Suitable for:
Wire cable cutter
Register to see prices 0.0 USD
Cable cutter 190 mm
Strong design, fully drop forged from steel. With screw joint and opening spring. Cutter edge hardness 64 HRC. Handles with light PVC coating.
For cutting wire ropes, multi-core cables etc.
Chrome vanadium special steel, oil-hardened.
overall length: 190 mm
for wire ropes/round mild steel bar: ⌀8 mm
for wire ropes (maximum 1600 N/mm2): ⌀5 mm
for round steel bar (maximum 1200 N/mm2): ⌀4 mm
Register to see prices 0.0 USD
Universal locking pliers, shape of the oval jaw 115 mm
Serrated jaws and powerful steel spring clamp body. Distance and clamping pressure adjustable via a knurled screw. Nickel plated pliers.
Oval jaw shape
Register to see prices 0.0 USD
Universal locking pliers, shape of the oval jaw 225 mm
Serrated jaws and powerful steel spring clamp body. Distance and clamping pressure adjustable via a knurled screw. Nickel plated pliers.
Oval jaw shape
Register to see prices 0.0 USD
Universal grip wrench, jaw shape double Vee 250 mm
Serrated jaws and sturdy spring steel body. Span and clamping pressure adjustable with a knurled screw. Fully nickel-plated.
Jaw shape double Vee.
For clamping profiled and flat materials. Clamping force up to 10,000 N.
Material: Jaws of chrome vanadium steel, drop forged.
Jaw capacity: 40 mm
overall length: 250 mm
Jaw length: 35 mm
Register to see prices 0.0 USD
Mesh cutting pincers chemically blacked 220 mm
With special slim head and long handles. High strength precision ground cutting edges.
Standard: DIN ISO 9242
Material: Special tool steel, drop-forged, and oil-hardened.
Cutting capability: medium hard wire up to ⌀2.5 mm
overall length: 220 mm
Register to see prices 0.0 USD
Heavy-duty pincers 210 mm
Sturdy model, wear resistant. Jaws chemically blackened, head bright polished.
Standard: DIN ISO 9243
Material: Special tool steel, drop-forged, and oil-hardened.
Surface: chemically blackened, head bright polished
Cutting capability: medium hard wire up to ⌀2 mm
overall length: 210 mm
Register to see prices 0.0 USD
Heavy-duty pincers 180 mm
Sturdy model, wear resistant. Jaws chemically blackened, head bright polished.
Standard: DIN ISO 9243
Material: Special tool steel, drop-forged, and oil-hardened.
Surface: chemically blackened, head bright polished
Cutting capability: medium hard wire up to ⌀2 mm
overall length: 180 mm
Register to see prices 0.0 USD