Wire thickness: 2.4mm, 8 wires

Elastic paddle in stainless steel strip, flat ovoid wooden handle.

Robust and handy wooden handle. A solid metal cage prevents the projection of abrasive grains and sparks.
Use
For sharpening or rough dressing of grinding wheels.

The multiple vents ensure good air circulation, which once again increases comfort.
Also suitable for glasses wearers.
- With glasses for green welders
- DIN EN 169

Stainless Steel

Artificial leather, embossed, readily processable, very good wearing confort, no staining, not sensitive to light

Powerful oven for larger molds
The latest member of our convection oven line provides a larger inside width as the models No.1 and
No.2. The powerful combination of heating and fan allows a short preheating period and guarantees
a perfect heat distribution. In addition to the timer control the oven can be turned on permanently.

Heating: 4000W, fan motor with reversing rotation direction, Heating active light
Thermostat: infinitely up to 290°C
Timer: infinitely 0 - 60 minutes and permanent on, On/Off active light
Housing: Stainless steel, inside and outside, door with large double pane viewing window, opens down to the front, double side bouncy supports, 25W illumination
Accessories: 3 trays standard
Power supply: 400 V / 50Hz / 4,4 kW
Dimensions: outside: W 860 x D 780 x H 580 mm / inside : W 600 x D 400 x H 360 mm
Weight: 40 kgs

Space requirements WxD: 1400 x 800 mm
Power requirements: 400 V / 50 Hz / 1,27 kW / 1,7 kW
Noise level: 75 dB(A)
Power cord length: 2 m
Weight: 134,000 kg
Calour: lichtgrau (RAL 7035)
Scope of delivery: with 1 Sanding belt (2500 x 50 mm), 1 round grinding plate, 2 m power cord with CEE plug
Sanding belt speed: 15/30 m/sec
Dimension upper part W x D x H: 1000 x 500 x 1622 mm
Description: left side: aluminium plane wheel 350 mm Ø, continuous, inclinable support table, folding down at the side for full use of the grinding surface, extraction connection piece 100 mm Ø to connect to a chip extraction system with a minimum air velocity of 20 m/s right side: belt tensioning arm with closed protection hood, extraction connection piece 100 mm Ø, belt length 2500 mm, belt width 50 mm with round plate, contact wheel, sanding belt

Internal brushes with galvanised twisted wire core and plain helix of bristles.
Helical brush section of waved steel wire.
Overall length 300 mm, brush section length 100 mm.
Application:
For manual cleaning and deburring of pipes, bores etc.

Borematic quick blind hole micrometer for 3-point internal measurement. Large LCD display with 11 mm character height for clear and error-free reading. Display can be rotated 330°. The measuring probes centre the micrometer automatically in the bore and ensure easy handling. The measuring probes are adjusted without any error by a carbide cone.
Anvils of titanium-coated hardened steel.
Advantage:
Very quick measurement with high repetition accuracy due to pistol grip and constant measuring force.
Function:
Data storage button saves the measurement result (for instance in inaccessible measurement positions).
Zero point / absolute size enables zeroing at any position.
Good / Reject display for easy checking against tolerance values.
Quick adjustment for quick spanning of the distance to be measured.

Densely woven cotton cloth evenly spread with synthetic resin bonded Aluminium Oxide (A). Very good grit bonding, high abrasion performance and long service life.
Type VSM KK 114 F: Brown fabric, for extremely demanding applications. This grade is particularly supple, resistant to oil and petroleum and can be torn in longitudinal direction to yield clean edges without fraying.
Packaging tape with integral tear-off cutter.
Application:
Predominantly for rubbing down metals by hand, but also suitable for all other materials.

Handy small spirit level. Die-cast aluminium profile. Face-milled measuring faces. Unbreakable acrylic vials (vertical + horizontal).
Additionally 360° rotating vial. Vee groove and magnet in the measuring face.

MACHINE FEATURES

Milling shaft for soles with adjustable fixed guide
Milling shaft for soles with bayonet coupling
Abrasive shaft with 2 independent belts 1650 x 40 mm
Dual-speed abrasive shaft for the three-phase model
Sandpaper advance in canvas
Low-speed waxing shaft with rotating brushes and pads, 3 colors
Adjustable polishing wheel motor
Internal wheels for easy movement
Automatic suction opening only at the used workstation. OPEN SYSTEM
Integrated LED light on abrasive belts
MACHINE DIMENSIONS

Width: 1350 mm - Depth: 770 mm - Height: 1700 mm - Weight: 450 Kg

The 8954 Tartan™ tape is a polypropylene tape reinforced with fiberglass and coated with a rubber resin adhesive. It provides good moisture resistance and has excellent initial adhesion.

- It is commonly used for general reinforcement of cardboard or light bundling and maintenance purposes.
- It adheres well to various surfaces.
- Strength: 135 N/cm.

mechanical column scale with eye-level beam
the construction of steel and cast iron makes it extremely stable
high capacity of 220 kg
fine graduation of 100 g
reset-to-zero function
transport castors

Acrylic resin is very fluid, allowing, in combination with COPACRYL Jersey or COPACRYL Carbon resins, to add flexibility to composite parts.

The Soft resin cannot be used alone and must be incorporated into the Jersey or Carbon resin at a ratio of 10 to 30% to add flexibility to the fabricated device.

The polymerization of this resin occurs at room temperature by adding our SIPACRYL powder hardener, at a maximum ratio of 2% to 3% by weight compared to the amount of resin.

Combining COPACRYL Soft resin with Jersey or Carbon resins yields composite parts with the following characteristics:

Excellent mechanical properties
Very good skin tolerance
Ability to be thermoformed after curing (within the elasticity limits of the reinforcement fabrics used)
Can also be used with our natural reinforcements ORTHOFLAX®, ECO-BLACK, and HYBRIDS.

6 slotted screwdrivers 2.5 x 75, 3.5 x 100, 4 x 100, 5.5 x 125, 6.5 x 150, 8 x 175 and 2 PH cross-head screwdrivers no. 1 + 2

Overall length: 180mm
Piano wire cutting values ​​up to ⌀: 2 mm
Standard: DIN ISO 5746
Material: Chrome vanadium steel
surface: chrome
spark-free: no
EAN/GTIN: 3662424087257
Manufacturer number: 187A.18CPE
Execution:
Chrome vanadium steel, chrome-plated head and joint, with heavy-walled covers on handles. Serrated jaws. Plastic opening spring that reduces fatigue. Induction hardened cuts (approx. 64 HRC), also suitable for piano wire.

including Rollabout Tray with integrated Blister Forming frame cradle
Heating with 24 Infrared-Quartz-Tubes, Dual-Zone switching (6/24), Temp.
measurement of the Material surface by opto-electr. IR-sensor, infinitely adjustable
from 30°C to 250°C by SPS controller with PID feature, Software build 3.0 with
maintenance info, programmable Ramp- and Timer-feature with an option to store
slowly raising heat processes, monitoring of the heating process by graphical trend,
tefloncoated (replaceable) Rollabout Tray, 4 casters with stop, height adjustable by
gas-shock (min. 820mm, max. 1050 mm), integrated Blister forming cradle, width
adjustable, retractable when not in use, vertical Frontdoor with double pane Window,
double gas-shock supported, Illum. by two 25W bulbs, colour: colour: RAL7035
(light-grey) / RAL7031 (blue-grey), net weight 360kg
Electr. Conn.: 380-400V / 50-60Hz / 3Ph+N+PE. / 11,1 kW (3 x 32A CEE)
Dim..: outside WxDxH: 1595x1770x1400 mm
inside WxDxH : 1300x1590x500 mm

Developmental dysplasia of the hip (DDH) occurs in approximately 1 or 2 babies in 1,000. The Limbs & Things Infant Hip Exam Trainer has been designed to meet the specific requirements of healthcare professionals training to identify and diagnose DDH.

Limbs & Things worked with leading American paediatrician, Dr Joseph O. Lopreiato, a specialist in Simulation Education, and Elizabeth Weissbord, MA, CMI, to develop this infant hip simulation model.

This infant hip trainer comes with 2 interchangeable lower leg modules that allow trainees to identify the differences between normal and abnormal hip pathologies. The Lower Abnormal hip module’s range of motion gives trainees a realistic representation of the following:

Dislocating a hip that is lax in the socket
Relocating a hip that is dislocated from the socket, feeling the “clunk” as the procedure is completed
Using the Galeazzi sign to identify the visual signs of DDH
Using both the Ortolani Test and Barlow Maneuver on both hip pathologies
Click here for the DDH Training Curriculum.

An infant torso module was included in the trainer to provide a weighted model that has greater stability when in use. It also increases realism over a simple lower leg module.

Technical characteristics:
Flashlight Function: Focusing
ATEX zone: none
Luminous flux: 300 lm
Lighting duration: 3 h
Power supply: Battery operation
Number of batteries included: 1
Battery type: Li-ion
Battery capacity: 2.6 A h
Total length: 145mm
⌀ head: 35 mm
Weight: 188g
EAN/GTIN: 4045197727244
Description
Execution:
Focusable and very robust cordless LED flashlight made of anodized aluminium. One-handed focusing allows quick and easy adjustment of the light beam. Rotary switch with integrated battery charge indicator and micro-USB port.
Delivery:
With micro-USB charger, wrist strap and GARANT transport box

Technical characteristics:
Type: SP11
Max. working pressure: 24 bar
Maximum operating temperature: 50°C
Air flow: 25 l/min
Flow at 5 bar: 25 l/min

Execution:
Spray gun with straight tube and plastic container, matt red, capacity 1 l.

Suitable for all airbrush devices with 1/8" connection to 1/4" connection.
Characteristics
Connections: 12 / 9 mm (1/4 | 1/8 inch) IG
Diameter (internal): 4 mm
Hose: diameter: Ø 4mm (inside)
Ø 7mm (outside)
Hose: Type: Pond Hose

This pump is designed according to the requirements of the air conditioning systems and enables a professional evacuation of the cold air conditioning circuit.

Due to its outstanding technical characteristics and the robust design, the vacuum pump can also be used for the air-conditioning in your car.

Because of the repeated daily service work and the related cold starts, it is important for the air-conditioning technology that the vacuum pumps are reliable.

• For the mobile use for evacuating refrigeration and air conditioning circuits
• For universal use with refrigerant recovery machines and installation aids
• For evacuating the air conditioning systems from cars and commercial vehicles
• As replacement for air conditioning service units
• Ergonomic handle for the easy and safe transportation of the vacuum pump
• For minimizing the noise the vacuum pump is equipped with rubber feet
• Switch on and off directly at the vacuum pump
• oil-free and therefore maintenance free / no oil mist

Connections: 12.91 mm / 1/4 inch
Dimensions: 415x365x285mm
85x65x105mm
Debit (l/h): 8100 LITERS
Noise level db(A): ≤ 55
Cable length: 1.9 m
Vacuum: 600mm Hg

1000x1000x12mm
cell-polyethylene foam
Application:
-for padding of positioning splints and correctional braces (e.g. orthoses)
Characteristics:
-closed-celled expanded PE
-washable
-suitable for processing with Streifylen and Streifycolor
-molding temperature depending on heat source -approx.100-130 °C
-approx. 15-18 Shore A

On PE-coated fabric, universal repair tape suitable for rough surfaces, water-resistant, with strong adhesion.

Because bacteria hide everywhere. The wall dispenser ensures a particularly hygienic hand washing process. Trigger the pumping mechanism with your elbow or forearm and avoid direct contact with your hands. The dispenser can be filled with liquid soap or disinfectant in just a few steps. Its simple and functional design makes it a versatile tool for use at home or in catering as well as at work.

Main specifications
Height: 28cm
Material: Metal
Volume: 500ml

CHARACTERISTICS
- Motor shaft 1400rpm
- 35mm abrasive accessories
- Horsehair brush and waxing pad
- Cutter shaft 6000rpm with cutter rule
- Pumice motor
- Internal extractor fan
- Dust recovery system with extractable drawers
- Internal fabric filter with back panels for double filtration

MACHINE DIMENSIONS
- Width 900mm - Depth 600mm - Height 1500mm - Weight 140 Kg

POWER SUPPLY
- Single-phase 230V - 1ph - 50Hz

FEATURES
- Complete drive shaft with bayonet connection
- Abrasive ring diameter 100x90mm length 283mm
- Integrated vacuum cleaner and external fabric filter

MACHINE DIMENSIONS
- Width 540mm - Depth 410mm - Height 440mm - Weight 34 Kg

POWER SOURCE
- Single phase 230V - 1ph - 50Hz

MACHINE FEATURES
- Horizontal motor with bayonet connection
- T22 pine cone and pad supplied
- Foot switch operation
- Arrangement for connection to a centralized vacuum system
- 60 mm diameter on the side
- Suction channel adjacent to the pad

MACHINE DIMENSIONS
- Width 700mm - Depth 400mm - Height 400mm - Weight 50 Kg

POWER SUPPLY
- Single phase 230V - 1ph - 50Hz with inverter

Max load: 125kg

Automatic control panel with digital control
Terminal board (Omission with socket combination 3)
Diesel filter with water trap
Crane loading lug
The main battery switch
Hot engine parts protection
Connection for a 230 V / 16 A battery charge (only in conjunction with a socket combination)
Manual oil scavenger pump

3x800x800mm

Directions
- Protection cream and skin care in high demand
- in case of contact with aqueous solutions, surfactants, alkaline solutions
- when handling plasters or substances insoluble in water, e.g. oils and lacquers.

Properties
- Oil-in-water emulsion
- pH neutral
- moisturizing
- quick to put on
- has a regulating effect on the water balance and elasticity of the skin
promotes regeneration
- Protects against water, fluids, dirt, chemicals or detergents

4x1740x960mm
Polyethylene foam material, thermo-moldable at approx. 110-130°C, approx. 30° Shore A

Body width: 490 mm
Body depth: 190 mm
Body height: 409 mm
Material of the housing: Plastic
Colour of housing: blue
Connection outlet: 1/4 in
maximum operating pressure: 16 bar
Hose external ⌀: 12 mm
Hose internal ⌀: 8 mm
Material of hose: Polyurethane
Colour of hose: blue
SCS automatic roll-up drum: yes

IP20: Protection against ingress of foreign bodies of ⌀ < 12 mm, but all contact must be avoided, and no protection against water.

Outer diameter: 200mm
Width: 30mm
Bore: 32mm
Abrasive material: normal corundum
Grain size: 36