Version:
Multi-purpose drill with especially sharp carbide insert for precise holes in different materials. Large-volume helical flute for quick removal of dust and chips. Shank of annealed special steel.
Application:
For drilling various materials, including in a single operation:
Bricks, porous concrete, lightweight materials, plastics.
Tiles, ceramics, marble, glass.
Metal and material combinations in a single operation, such as when fitting windows or when reinforcing concrete.
Content:
1 each drill Size. (⌀) 4; 5; 6; 6; 8; 8; 10
Note:
Caution: only for rotary use (without hammer action!)
Faster drilling and more holes per battery charge than with hammer drill bits.

Countersink sets, in a case
Practical set for assembly and workshop use.
Content table use:
1× each countersink: Size 4,3; 5; 6; 6,3; 7; 8; 8,3; 10; 10,4; 11,5, 12,4; 15; 16,5; 19; 20,5; 23; 25
Number of countersinks: 17
Countersink tip angle: 90 degrees
Tool material: HSS
Number of cutting edges Z: 3

high-quality HSS drill bits for woodworking, have a special geometry and transport even wet wood chips perfectly out of deep holes, ideal for precise and clean holes in European and exotic hardwoods, coated and uncoated chipboard

4 stone drill Ø 5/6/7/8 mm
3 x screwdriver bits L = 25 mm PZ 2/2/2
75 x 3.5 x 30 screws: 25 pieces, 20 pieces 4.0 x 35, 20 pieces 4.0 x40, 10 pieces 5.0 x 50
90 plugs: 30 pieces ø 5 mm, 25 pieces ø 6 mm, 20 pieces ø 7 mm, 15 pieces ø 8 mm
Universal holder, magnetic.

Ideally equipped to handle virtually any task: High-performance DIY enthusiast set for precise, clean drilling in metal, masonry and wood, as well as high-grade screwdriver bits and nut setters for the most commonly used screw head types. Comes with a universal carpet knife.
Features & Benefits
11 metal drill bits, Ø 1.5-6.5 mm, with titanium nitride coating that excel through their fast drilling progress and particularly long service life (not suitable for use in aluminium).
6 robust carbide-tipped masonry drill bits, Ø 4-10 mm, that impress with their long service life, fast stock removal, low heat development and precision.
5 sharp wood drill bits, Ø 4-10 mm, with centring tip and shoulder cutter for precise, tear-free hole drilling, as well as 2 spade bits diameter 16/22 mm with titanium nitride coating.

11 HSS-TiN metal drill bits, Ø 1.5-6.5 mm
6 masonry drill bits, Ø 4-10 mm
5 wood drill bits, Ø 4-10 mm
2 spade bits, Titanium, Ø 16/22 mm
18 screwdriver bits, L=25 mm
PH 1/2/2/3
PZ 1/2/2/3
S 4/6/7
HEX 3/4/5/6
T 15/20/25
3 nutsetters, Ø 7/8/10 mm
1 diameter gauge
1 knife
1 adapter for nut setters
1 universal holder, magnetic
1 countersink

Strengthened core taper.
With point geometry shape C.

Strengthened core taper.
With point geometry shape C.

Strengthened core taper.
With point geometry shape C.

All cutters have 3 teeth, radial relief.
The flutes are rectified in the mass.
Bevelling cutters in economical execution.
Use:
Precision chamfering cutters for making bevels without facets.

All cutters have 3 teeth, radial relief.
The flutes are rectified in the mass.
Bevelling cutters in economical execution.
Use:
Precision chamfering cutters for making bevels without facets.

All cutters have 3 teeth, radial relief.
The flutes are rectified in the mass.
Bevelling cutters in economical execution.
Use:
Precision chamfering cutters for making bevels without facets.

Two-edged with cylindrical shank.
Special steel; used for normal drilling in wood, to some extent also in hardwood. The sharp undercut blade ensures tear-free blind holes and at the same time reduces the risk of overheating.
Application: For drilling tear-free and accurate blind holes and through holes.
Standard: DIN 7483 G
Number of drills: 5
Packaging: Wooden case
⌀: 15 mm; 20 mm; 25 mm; 30 mm; 35 mm

Tool material: HSS
Type: N
Helix angle: 35-40 °
Shank: Plain shank

Standard core without core taper.
Precision ground point.
Profile ground:
High concentricity and pitch accuracy, drills for series production use.
With point geometry shape C from size 2.4 mm
Coating: TiN

With sharp drill point, pre-drilling not necessary. Conically increasing cutting edges and radially relief ground circumference for a paring cut. With scale in the flutes. Three drive flats on the shank.
Leaves no burr or chatter marks.
Sheet metal 0.1 − 2 mm, stainless steel 0.1 − 1 mm, non-ferrous metals: 0.1 − 5 mm, plastics up to 10 mm.
Cutter ⌀ Dc: 16 mm - 30.5 mm
Overall length: 71 mm
Shank ⌀: 10 mm
Tool material: HSS

Center drill with radius type R

D 25mm
ETOODRILFO25

D 22mm
ETOODRILFO22

D 30mm
ETOODRILFO30

With sharp drill point, pre-drilling not necessary. Conically increasing cutting edges and radially relief ground circumference for a paring cut. With scale in the flutes. Three drive flats on the shank.
Set of 3 conical sheet and tube drills and 1 cutting compound No. 118160 in a case.
Leaves no burr or chatter marks.
Sheet metal 0.1 − 2 mm, stainless steel 0.1 − 1 mm, non-ferrous metals: 0.1 − 5 mm, plastics up to 10 mm.
1x each taper sheet and tube drill: Size 3 -14; 8 − 20; 16 − 30.5

Countersink sets, in a case.
Practical set for assembly and workshop use.
Content table use:
1× each countersink: Size 6; 8; 10; 11.5; 15; 19
Number of countersinks: 6
Countersink tip angle: 90 degrees
Tool material: HSS
Number of cutting edges Z: 3

HSS, 19 pieces, D 1 to 10mm by step of 0.5mm

HSS, 25 pieces, D 1 to 13mm by step of 0.5mm