• Hammers
  • Abrasive
  • Knives
  • Orthopedic tools
  • Scissors
  • Scewdrivers
  • Pliers
  • Wrenches
  • Files, Rasps
  • Saws
  • Drill bit
  • Measuring tools
Square file Cut 1 (coarse cut) 250 mm
The blanks are forged and ground; manufactured with an exact cut of even density and depth using special machines. These non-convex files have tooth profiles appropriate to each grade of file.
Cuts on all faces; convex end.
The quality file for workshop use with long tool life and high removal rate.
Standard: DIN 7261 form D
Length without tang: 250 mm
Width: 10 mm
Register to see prices 0.0 USD
Set of 6 precision needle files, 160mm
Swiss precision needle files meet the most stringent requirements in terms of shape and size precision, performance and service life. Waist length = 1/2 file length. Made of special steel for precision files with high wear resistance (65-66 HRC). Precisely designed shapes, special size angles and a large choice of different sizes. High performance.
Register to see prices 0.0 USD
Register to see prices 0.0 USD
Register to see prices 0.0 USD
Wood rasp, half round 250 mm
The blanks are precision forged, ground and have an exact cut of even density and depth. After most careful tempering while hardening, these quality wood rasps/ files achieve the best performance and tool life.
Norm: DIN 7263
Cross section: 25×7 mm
Length without tang: 250 mm
Register to see prices 0.0 USD
Precision needle file, round, 160 mm
Swiss precision needle files satisfy the highest demands for accuracy of shape, precision cut, removal rate and tool life. Cut length = 1/2 file length. Manufactured from special steel for precision files with high wear resistance (65-66 HRC). Precisely determined shapes, special cut angle and large selection of different cuts. High metal removal rate.
Overall length: 160 mm
Diameter: 2.9 mm
Register to see prices 0.0 USD
Precision needle file, half-round, 200 mm
Swiss precision needle files satisfy the highest demands for accuracy of shape, precision cut, removal rate and tool life. Cut length = 1/2 file length. Manufactured from special steel for precision files with high wear resistance (65-66 HRC). Precisely determined shapes, special cut angle and large selection of different cuts. High metal removal rate.
Overall length: 200 mm
Cross section: 6.5×2.0 mm
Register to see prices 0.0 USD
Precision needle file, flat, 200 mm
Swiss precision needle files satisfy the highest demands for accuracy of shape, precision cut, removal rate and tool life. Cut length = 1/2 file length. Manufactured from special steel for precision files with high wear resistance (65-66 HRC). Precisely determined shapes, special cut angle and large selection of different cuts. High metal removal rate.
Overall length: 200 mm
Cross section: 6.5×1.3 mm
Register to see prices 0.0 USD
Square file Cut 2 (2nd cut) 250 mm
The blanks are forged and ground; manufactured with an exact cut of even density and depth using special machines. These non-convex files have tooth profiles appropriate to each grade of file.
Cuts on all faces; convex end.
The quality file for workshop use with long tool life and high removal rate.
Standard: DIN 7261 form D
Length without tang: 250 mm
Width: 10 mm
Register to see prices 0.0 USD
Half round file Cut 3 (smooth) 250 mm
The blanks are forged and ground; manufactured with an exact cut of even density and depth using special machines. These non-convex files have tooth profiles appropriate to each grade of file.
With helical cut; convex end.
The quality file for workshop use with long tool life and high removal rate.
Standard: DIN 7261 form E
Length without tang: 250 mm
Register to see prices 0.0 USD
Half round file Cut 1 (bastard) 250 mm
The blanks are forged and ground; manufactured with an exact cut of even density and depth using special machines. These non-convex files have tooth profiles appropriate to each grade of file.
With helical cut; convex end.
The quality file for workshop use with long tool life and high removal rate.
Standard: DIN 7261 form E
Length without tang: 250 mm
Register to see prices 0.0 USD
Hand file Cut 3 (smooth) 250 mm
The blanks are forged and ground; manufactured with an exact cut of even density and depth using special machines. These non-convex files have tooth profiles appropriate to each grade of file.
Cuts on 3 faces; square end.
The quality file for workshop use with long tool life and high removal rate.
Standard: DIN 7261 form A
Length without tang: 250 mm
Register to see prices 0.0 USD
Hand file Cut 1 (Bastard) 250 mm
The blanks are forged and ground; manufactured with an exact cut of even density and depth using special machines. These non-convex files have tooth profiles appropriate to each grade of file.
Cuts on 3 faces; square end.
The quality file for workshop use with long tool life and high removal rate.
Standard: DIN 7261 form A
Length without tang: 250 mm
Register to see prices 0.0 USD
General-purpose hand file 200 mm
Universal hand files 4 in 1 with a flat side and a semi-round side, with two sizes each
Register to see prices 0.0 USD
Precision key files set, 6-piece in plastic case
Keyed files are manufactured on precision automatic machines. They guarantee high performance and a long service life.
Register to see prices 0.0 USD
Three square file Cut 2 (2nd cut) 250 mm
The blanks are forged and ground; manufactured with an exact cut of even density and depth using special machines. These non-convex files have tooth profiles appropriate to each grade of file.
Cuts on all faces; convex end.
The quality file for workshop use with long tool life and high removal rate.
Standard: DIN 7261 form C
Length without tang: 250 mm
Width: 18 mm
Register to see prices 0.0 USD
Round file Cut 2 (2nd cut) 250 mm
The blanks are forged and ground; manufactured with an exact cut of even density and depth using special machines. These non-convex files have tooth profiles appropriate to each grade of file.
With helical cut; convex end.
The quality file for workshop use with long tool life and high removal rate.
Standard: DIN 7261 form F
Diameter: 9.2 mm
Length without tang: 250 mm
Register to see prices 0.0 USD
Half round file Cut 1 (bastard) 200 mm
The blanks are forged and ground; manufactured with an exact cut of even density and depth using special machines. These non-convex files have tooth profiles appropriate to each grade of file.
With helical cut; convex end.
The quality file for workshop use with long tool life and high removal rate.
Standard: DIN 7261 form E
Length without tang: 200 mm
Register to see prices 0.0 USD
Hand file Cut 1 (Bastard) 200 mm
The blanks are forged and ground; manufactured with an exact cut of even density and depth using special machines. These non-convex files have tooth profiles appropriate to each grade of file.
Cuts on 3 faces; square end.
The quality file for workshop use with long tool life and high removal rate.
Standard: DIN 7261 form A
Length without tang: 200 mm
Register to see prices 0.0 USD
File brush 100x25mm
Upholstery made of steel wires
Register to see prices 0.0 USD
File brush 115x40mm
Upholstery made of steel wires
Register to see prices 0.0 USD
Register to see prices 0.0 USD
SURFORM round file
for widening holes, shaping or planing concave surfaces, very ideal for turner work, yellow plastic handle, black hand rest (can be disassembled)
Register to see prices 0.0 USD
Spare blade, for "Stanley Surform" fine flat 250mm
for hardwood, softwood, vinyl, nylon, plaster, chalk, chipboard, linoleum, rubber, thermalite, fiberglass

Register to see prices 0.0 USD
SURFORM flat file, 250mm
ideal tool for file work, black metal body, sturdy yellow plastic handle
Register to see prices 0.0 USD