Wire thickness: 2.4mm, 8 wires

Elastic paddle in stainless steel strip, flat ovoid wooden handle.

74-00869

950W
560 tr/min

made of premium steel, with round, curved and plastic-coated shank, flexible blades, polished

Plastic bucket, sturdy model. With graduation and heavy metal handle.

Using the plaster modelling aid, you can process plaster models quickly and efficiently. Continuous clamping and re-clamping of the plaster model is now a thing of the past.
Your production process is optimised.
The plaster modelling aid saves time and labour costs, facilitating everyday work routines.
Plaster models weighing up to 40 kg can be processed with the plaster modelling aid.
Dimensions WxDxH: 119 x 55 x 130 mm
Equipment: 4 attachments with diameters of 16 mm, 21 mm, 26 mm and 36 mm
Weight: 1.4 kg
Material: Stainless steel
To be used for: for plaster modelling without securing the plaster model with jaw clamps or ring clamps; for various tube diameters
Type of Planning and Equipment: Plaster Casting and Plaster Modification

For preparing models
For forming temporary dummies when there is no direct resin contact
Easily formable
Easy to apply, even on larger surfaces

Measuring jug set of transparent polypropylene, resistant to oil and acid. Scale with ml divisions, ergonomic handle, stackable.
Supplied with:
1 measuring jug 0.5 litre, scale division 10 ml.
1 measuring jug 1.0 litre, scale division 10 ml.
1 measuring jug 2.0litre, scale division 20 ml.

1 flat, 1 concave, 1 convex

Fully hardened and tempered. Blade uniformly through hardened; can be repeatedly reground without re-hardening. Head specially annealed to prevent splintering. Special quality, i.e. highest possible tip hardness (approx. 59 HRC) with exceptional toughness.
Chrome vanadium special alloy. Surface chrome-plated.

Fully hardened and tempered. Blade uniformly through hardened; can be repeatedly reground without re-hardening. Head specially annealed to prevent splintering. Special quality, i.e. highest possible tip hardness (approx. 59 HRC) with exceptional toughness.
Chrome vanadium special alloy. Surface chrome-plated.

Mixer for paints and coatings. Mixer with hexagon profile for clamping in a mandrel.
Up to 20 kg, 10 mm hexagon

with flattened whitish booklet, tungsten-vanadium steel

with straight jaws
74-0082

74-00842

Octagonal body, uncoated head

Octagonal body, uncoated head

Made of flat-oval steel, hardened and tempered. Blade uniformly through hardened; can be repeatedly reground without re-hardening. Head specially annealed to prevent splintering.

Made of flat-oval steel, hardened and tempered. Blade uniformly through hardened; can be repeatedly reground without re-hardening. Head specially annealed to prevent splintering.

with round jaws
74-00809

Made of flat-oval steel, hardened and tempered. Blade uniformly through hardened; can be repeatedly reground without re-hardening. Head specially annealed to prevent splintering.

Flat cold chisel: 1 pc. each 125; 150 mm
Cross-cut cold chisel: 1 pc. 125 mm
Taper pin punch: 1 pc. each size 120×2; 150×3 mm
Centre punch: 1 pc. 120×4 mm
74-01714

OHDWGLUESPCT
74-00843

Use to shape the system side bars and knee joint bars

0 − 9, 6 mm
ETOOPUNCPL09
74-01716

A − Z, & 6 mm
ETOOPUNCPL26
74-01715

Octagonal body, uncoated head

Sturdy octagonal shank with cylindrical shaft. Uniformly through hardened over the entire length. Head specially annealed to prevent splintering. Actual ⌀ 0.05 - 0.5 mm less than nominal ⌀, prevents the pin punch jamming in the hole.
Standard quality of chrome vanadium air hardening steel, painted.
1 each pin punch: 2; 3; 4; 5; 6; 8 mm
74-00791

made of premium steel, with round, curved and plastic-coated shank, flexible blades, polished
OTOOPLAPSD20
74-00870

foot impression tool for foot / blue print analysis
imprinting tool for early detection of foot pressure problems, such as for example flat-, splay-, hollow- or club feet, usable for diabetic or rheumatic foot syndromes
for diagnostic documentation by professionals in orthopaedics, podiatry or sports science
includes ink roller, ink, circumference marker, foot imprinting pad (100 sheets) and rubber plate

with riveting hole, length 680mm
74-01002

74-00873

diam. 125mm, 0.5l
OTOOPLAPPB05
74-00853

Octagonal shank, bright finished head. Head specially annealed to prevent splintering.
Chrome vanadium air hardened steel, painted surface.
1 each rivet snap setter: Size 2; 3; 4; 5; 6
74-00840

Octagonal body, uncoated head. The special treatment of the head prevents splinters
74-00845

2-component holder (up to size 3-20) with pistol handle with exchangeable precision ground punch cutters. For the production of gaskets two punch cutters of different ⌀ are inserted together in the holder.
For punching or manufacturing discs / rings in one operation. For rubber, leather, felt, plastic, cork, fabric or similar materials.
1 each circle cutter ⌀: 55−330 mm
Centring point No. 832140: 1 pc.
1× each punching tool ⌀ No. 832110: 15 pcs.
size 3; 4; 6; 8; 10; 12; 14; 16; 18; 20; 22; 24; 26; 28; 30
Available combinations of punches inner : outer (mm): 3−10 inner with 12−30 outer 12−20 inner with 22−30 outer
Container length×width×height (mm): Plastic 275×205×50
Use an underlay of wood, leather etc. when punching to avoid damage.
The following combinations are not possible: 20 (inner) with 22 (outer); 30 (inner) with 32 (outer); 40 (inner) with 42 (outer); 50 (inner) with 52 (outer).

2-component holder (up to size 3-20) with pistol handle with exchangeable precision ground punch cutters. For the production of gaskets two punch cutters of different ⌀ are inserted together in the holder.
For punching or manufacturing discs / rings in one operation. For rubber, leather, felt, plastic, cork, fabric or similar materials.
1× each punching tool ⌀: 10 pcs.
size 3; 4; 6; 8; 10; 12; 14; 16; 18; 20
Available combinations of punches inner : outer (mm): 3−10 inner with 12−20 outer
Container length×width×height (mm): Plastic 140×100×40
Use an underlay of wood, leather etc. when punching to avoid damage.
The following combinations are not possible: 20 (inner) with 22 (outer); 30 (inner) with 32 (outer); 40 (inner) with 42 (outer); 50 (inner) with 52 (outer).

Octagonal body, uncoated head