• Hammers
  • Abrasive
  • Knives
  • Orthopedic tools
  • Scissors
  • Scewdrivers
  • Pliers
  • Wrenches
  • Files, Rasps
  • Saws
  • Drill bit
  • Measuring tools
Electric plaster saw
Oscillating plaster saw. Power : 500 W.
From 6.500 to 24.000 oscillations/minute.
Weight : 1.528 kg.
Supplied with 2 blades : Ø 50 and Ø 65 mm for natural plaster.
Register to see prices 0.0 USD
Register to see prices 0.0 USD
Register to see prices 0.0 USD
Replacement saw blade Rip-toothed 760 mm
Bow made of oval, varnished steel tube with clamping lever. Saw blade made of original Swedish steel. With hardened tooth tips. Precision ground and exactly set.
Rip-toothed (HZ) 4 teeth before the raker − always sharp. For all types of wood, particularly green wood.
Tooth profile: Rip-toothed
Blade length: 760 mm
Blade height: 18 mm
Register to see prices 0.0 USD
Gent’s saw, offset with fixed handle
Saw blade for wood and plastic of high-quality special steel with bright reinforced back. Fine teeth, hardened tips, set and sharpened, 35 mm depth of cut.
With fixed, varnished handle offset to the right.
TPI: 15
Blade length: 250 mm
Register to see prices 0.0 USD
“PUK” saw blade pack, 12 pieces universal (310) 25 TPI
Blade thickness: 0.4 mm
Blade length: 150 mm
TPI: 25
Register to see prices 0.0 USD
General-purpose hacksaw “PUK” with general-purpose blade (310) Adjustable handle
Small and handy, good cutting performance.
With adjustable natural varnished wooden handle. Can be clamped at any point on the frame. Frame solid nickel-plated steel square bar.
Supplied with: Including general-purpose saw blade for metal, aluminium, wood and plastic. Blade length 150 mm.
Blade length: 150 mm
Overall length: 310 mm
Register to see prices 0.0 USD
ProfCut handsaw 475 mm
ProfCut handsaws with handy 2-component handle.
GT- toothing (hardened, 3×ground), for dry, hard wood.
TPI: 9
Blade length: 475 mm
Register to see prices 0.0 USD
Bow saw with saw blade Rip-toothed 760 mm
Bow made of oval, varnished steel tube with clamping lever. Saw blade made of original Swedish steel. With hardened tooth tips. Precision ground and exactly set.
Rip-toothed (HZ) 4 teeth before the raker − always sharp. For all types of wood, particularly green wood.
Tooth profile: Rip-toothed
Blade length: 760 mm
Blade height: 18 mm
Register to see prices 0.0 USD
Hacksaw frame with bimetal blade 24 teeth
Hacksaw frame with all-steel back. Alternative blade setting at 90° for flush cutting. Plastic handle. Overall length 520 mm.
The bow saw with its prominent bow frame is characterised by the u-shaped bow which tensions the saw blades. The limitation in depth of cut of hand bow saws is presented by the distance from the blade to the bow. This frame shape permits the use of particularly slim saw blades, which in other frame shapes would be liable to buckle when subjected to cutting movements with the force in alternate senses or other than in the pulling sense. Thanks to the thin hacksaw blades the metal cutting effort required is reduced, because of the small cutting width. Thus this type of saw is the classic standard for hacksaw work in metalworking.
Register to see prices 0.0 USD
Jig saw
Sturdy general-purpose jigsaws with metal gearbox casings and overload protection.
With FIXTEC quick-release clamping system allows blades to be changed in seconds without any tools, and selectable orbital stroke for optimum cutting power and dust extraction combined with reduced saw blade wear.
Supplied with:
Supplied with chip break guard.
Supplied with 2 × saw blades, extraction adapter, sole plate, mains cable 4 m, carrying case.
Packaging: Carrying case
Manufacturer's designation: STEP1200XE
Power consumption: 730 W
Rate of strokes: 500 min-1 - 3,000 min-1
maximum sawn thickness steel: 10 mm
maximum sawn thickness wood: 135 mm
Mitre angle adjustment: Yes
Orbital stroke: 4-way
Weight: 2.4 kg
maximum vibration to EN: 10.5 m/s2
tool change without tools: yes, FIXTEC system
Register to see prices 0.0 USD
Oscillating saw, cordless, FEIN MultiMaster AMM 500 Plus
The most efficient oscillating machines, available in three power categories (SuperCut, MultiMaster, MultiTalent); new model with Starlock tool carrier (optimized power transmission for up to 35% faster working speed).
Almost unlimited applications (sawing, grinding, scraping, cutting, grating) thanks to the oscillating movement (low dust emission).
Electronic progressive adjustment of the rotation speed for optimal use.
Maximum quality and stability thanks to the metal gear case and the combined use of ball and needle bearings.
Optimal maneuverability thanks to the ergonomic design and the Softgrip coating, reduced weight.
Powerful MultiTool for rapid progress (for interior design and renovation) with more than 30 accessories for sawing in wood and metal, sanding, cutting tiles, etc.
Delivery:
Set of 30 accessories, 1 × suction device, 1 × plastic tool case.
Set of 30 accessories: 1 × E-Cut Long-Life saw blade - (10 mm), 2 × E-Cut Long-Life saw blades (35 mm), 2 × E-Cut Long-Life saw blades ( 65 mm), 1 × E-Cut Carbide Pro saw blade (32 mm), 1 × carbide saw blade (⌀ 75), 1 × carbide rasp (triangular), 1 × spatula, 1 × perforated backing pad , 1 × perforated sanding sheet each (grit 60, 80, 120, 180).
With 1 × ALG 80 rapid charger, 2 × Li-Ion batteries (18 V / 3 Ah).
1 “Akku” case with charger, 1 backing pad, 3 sanding sheets each (grain 60, 80, 120, 180), 1 fixed spatula, 1 HSS segment saw blade, 1 Long-Life E- saw blade Cut (65 mm), 1 E-Cut universal saw blade (44 mm).
Manufacturer no .: AFMM 18 QSL
Number of batteries included: 2
Battery type: Lithium-ion
Battery capacity: 3 A h
Battery voltage: 18V
Tool holders: StarlockPlus, Starlock
Number of oscillations: 11'000 min-¹ - 18'500 min-¹
Oscillation angle: 3.4 °
Angle approach of the support plate: 80 mm
Weight: 1.8 kg

Register to see prices 0.0 USD
Oscillating saw, FEIN MultiMaster 300 Plus Start
Market-leading oscillating tools in three different performance classes (SuperCut, MultiMaster, MultiTalent) in a new version with Starlock tool arbor (improved torque transmission of up to 35 % greater rate of progression of the work).
Virtually unlimited application possibilities (sawing, grinding, scraping, cutting, rasping) due to the oscillating mode of movement (low generation of dust).
Stepless electronic speed control for optimum working.
Very high quality and stability thanks to the metal gearbox and use of ball bearings and needle bearings throughout.
Optimum handling due to ergonomic design with soft-grip inlays and low weight.
Supplied with:
1 toolbox set “QuickStart” containing:1 abrasive plate, 3 each abrasive discs (80, 120, 180 grit), 1 E-Cut universal saw blade (44 mm).
Packaging: Carrying case
Manufacturer's designation: MM 300 Plus Start
Power consumption: 250 W
Toolholder: StarlockPlus, Starlock
Speed of oscillation: 11,000 min-1 - 20,000 min-1
Amplitude (oscillation movement): 2 × 1.6 degrees
Weight: 1.4 kg
Cable length: 5 m
Register to see prices 0.0 USD