Indication:
Elastic compression band, latex free
Product Description:
Light pressure. These bands are elastic in length and expandable in width. They are made of 76% viscose and 24% wrapped elastane. They adapt well to the shape of the body and stay in place. The bands are used in cases of venous insufficiency, in surgery and in physical medicine.
These bands are stamped printed on the band allowing for controlled durable elasticity, applied along the entire length. A rectangular mark becomes a square for an extension of 30%.
Usage tips:
Apply directly to the clean, dry wound.

Single Axis Foot with adjustable heel height 1H08A is
intended for amputees with unilateral or bilateral transfemoral
amputation at all levels or transtibial amputation
on the boundary of the upper, medium and lower-third of
it, can be used in prostheses after the disarticulation of the
knee or hip joint.
The Foot 1H08A has a plastic embedded insert in the forefoot,
which ensures its elasticity and durability. The foot is
produced in right and left versions.
Consists of foot and foot adapter with adjustable heel
shock absorber of medium stiffness. Adjustment of the
heel shock absorber by means of screw allows tuning heel
stiffness without disassembling the prosthesis. The foot
has 2 fixed heel heights. The substitute shock absorber is
ordered separately.
Activity level: M1, M2
Maximum patient weight: 100kg

Single Axis Foot with adjustable heel shock absorber is
intended for amputees with unilateral or bilateral transfemoral
amputation at all levels or transtibial amputation
on the boundary of the upper, medium and lower-third,
can be used in prostheses after the disarticulation of the
knee or hip joint.
Single Axis Foot 1H01A has a plastic embedded insert in
the forefoot, which ensures its elasticity and durability. The
foot is produced in right and left versions. Single Axis Foot
1H01A consists of foot and foot adapter with adjustable
heel shock absorber of medium stiffness. Adjustment of
the heel shock absorber by means of screw allows tuning
of heel stiffness without disassembling the prosthesis.
Changeable shock absorbers of soft and hard stiffness are
ordered separately.
Activity level: M1, M2
Maximum patient weight: 100kg

• Safe working load and lifting capacity of 240Kg (528lbs)
• The power assisted backrest section incorporates anti-trap
design gas strut
• Backrest angle adjustment from -25˚ to +75˚
• Choice of hydraulic or electric height elevation
• Excellent height range from 45cm to 98cm
• Retractable wheel design with adjustable foot for stability
on uneven surfaces
• Breathing hole and plug included as standard
• Purpose made precision bearings on all pivot points
• Clearance beneath frame for mobile hoist
• Hand switch fitted as standard on electric models
• Standard upholstery width of 65cm

Light rigid foam
- expansion factor: approx. 5.0
- density: approx. 300kg/m³
- limited mechanical strength

l=10mm

l=8.5mm

10x800x550mm

100pc
Application:
for manufacturing of closures for orthopaedic shoes

surface satin finished, material thickness 1.5 mm, seamless welded bowl with diameter 450 x 500 x 150 mm, bowl and drain board with revolving channel, 1 1/2" centric waste hole punch, removable plaster basket with cover.

• Two-section table with backrest assisted by gas spring
• Electric cylinder with pushing force of 8000N
• Handle control
• Secure order key
• Class IM1 fire retardant coating and foam
• Electrically adjustable height from 48 to 90 cm
• Safe working load: 160 kg
• Dimensions:
Length 198cm
Height adjustable 48 to 90cm

6x2000x1000mm
Polypropylene homopolymer (PPH), Excellent thermoforming, Chemical and corrosion resistant, thermo-moldable at approx. 165°C, approx. 75° Shore D

climate-conditioning,
air-permeable, attractive
design, yard goods

Very soft foam suitable even for children’s feet, with the best reproduction of contours.
- No crumbling
- Special German quality with great shape retention upon plaster pour
- No dusting even after a long period

Cast iron with PVC coating

- to treat small injuries in the hospital, in the cabin, at home or on the go
- for sensitive skin
- soft and supple
- slightly elastic in the direction of the width
- adapts well to the contours of the body - fixes the vulnerable cushion to the skin in complete safety
- reduced risk of adhesion to the wound thanks to the film
- almost painless dressing change
- continuous vulnerary cushion
- can be cut individually

Inelastic special plaster for tape bandages, suitable for limiting the movement of joints in the event of injuries. Consists of high quality inelastic adhesive fibers. Easy to tear off by hand

W=19mm / L=33m

Approved for use outdoors and in damp rooms (IP44).
Resistant to oil, gasoline and UV rays.
Neoprene rubber cable with rubber plug and socket protected against splashing water.
Operation:
IP44: Protection against splashing water from all directions and protection against the ingress of foreign bodies ⌀> 1 mm, but tools and wires must be kept away.

Cable unwinders with automatic guided winding and extraction mechanism, multiple stops per revolution. Closed plastic case and very resistant to breakage. Thermal overload protection, robust neoprene H07RN-F cable with connector.
Easy to mount on a wall or ceiling with a swivel range of 150 °.
Better ergonomics thanks to effortless work, secure storage and prevention of the risk of accidents and injuries due to cables laid on the floor.
Shockproof and protection against splashing water: Category 2 (K2) according to BGI
Rated power unwound: 2000 (16 A) W
Nominal voltage: 250 V
Length: 325 mm
Width: 185mm
Height: 275 mm
Cable class: H07RN-F
Cable design: 3G1.5
Cable material: Neoprene
Cable length: 15m

High quality branded alkaline manganese batteries last 2-3 times longer and can be stored twice as long as zinc and carbon batteries.
HOLEX batteries provide long-lasting and reliable power.
Number of batteries included: 4
Chemical composition: Alkaline-manganese
Battery designation: Micro, AAA
International format: LR3
Rated voltage: 1.5V
rechargeable: no

Ergonomic dual-material housing with rubber coating. Large, easily readable digital display with switchable backlighting. Automatic range selection measuring devices. All devices with contact tip attachment on the back for one-handed use, with holder.
Operation:
IP67: Protection against temporary immersion in water and protection against the ingress of dust (dust tight), as well as complete protection against contact.
Standard: IEC / DIN EN 61010-1; GS TÜV Rheinland and CE marking.
Delivery: With batteries, measuring cables
Display range 4'000
Display with backlight: yes
Basic accuracy: 1%
IP protection index: IP 67
Audible continuity check: yes
Diode control: yes
Measuring method: TRUE RMS (AC)
Hold value key: yes
Lighting of measuring points: yes
Automatic shutdown: yes
AC alternating voltage: 1 mV - 600 V
DC voltage: 0.1 mV - 600 V
AC alternating current: 0.1 µA - 10 A
DC current: 0.1 µA - 10 A
Resistance: 0.1 Ω - 40 MΩ
Capacitance: 0.01 nF - 4000 µF
Frequency: 0.01 Hz - 10 kHz
Overvoltage category: CAT III 600 V; CAT II 1000 V
Power supply: 2x ref. LR3

Manufacturer reference: 67 38 797
Protection class: ABEK2HgP3RD
For color code: RD40
Product type: Particle filter for powered air-purifying respirators
EAN / GTIN 4026056004645

also referenced under: APROMASKGA

The powerful single-filter full face mask stands for proven quality and reliability for respiratory and eye protection. The durable EPDM mask body with double waterproof rim and triple seal line guarantees a safe and comfortable fit and is suitable for virtually any face shape. The scratch-resistant and distortion-free PMMA (Plexiglas) visor guarantees a large field of vision and excellent all-round visibility. An intelligent ventilation system with separate inner mask helps prevent fogging of the visor. The 5-point bands allow quick and easy fitting without jamming the hair. With standard RD40 round thread according to EN 148-1.
Standard: EN 136 class 2
Silicone free
Lens coating: anti-fog; Scratch resistant
Filter connection: RD40
Manufacturer no .: R 55 800

also referenced under: APROMASKG

Equipment Pair of feet that can be driven in, with levelling feet, adjustable head section, lying surface made of 70 mm thick padding, chrome-plated square tubing
Dimensions WxDxH 650 x 1,950 x 650 mm
Material Synthetic leather cover
Weight 34 kg
Cover colour Classic silver-grey

Effective sanding height of 450 mm, pneumatic belt tension, light strip on sanding belt, integrated floor extraction, extraction on sanding belt, continuous speed control, incl. 649G60=2175X320 sanding belt
Electrical connection in V/Hz/kW 1x 230/ 50-60 / 2,2
Dimensions WxDxH 712 x 875 x 1.787 mm
Belt width 320 mm
Belt speed 6 - 16 m/s
Exhaust nozzle Ø 125 mm

The Pro-Fit 2000 features a solid steel body for smooth operation, a suction arm with fireproof suction tubing, a suction hood with a quick-change system as well as fastening materials and a safety package. The colour of the tool holder can be individually selected if desired. The standard accent colour is anthracite grey.
Electrical equipment Main safety switch, on/off button for router motor, emergency stop foot switch, 2.5 m power cord with 5x 16 A CEE plug and 5x 16 A CEE socket
Dimensions WxDxH 1,220 x 800 x 1,560 mm
Exhaust nozzle diameter 125 mm
Power cord Power cord with 5x 16 A CEE plug and 5x 16 A CEE socket
Working height 1,000 mm
Space requirements WxD 1,100 x 1,300 mm
Equipment Steel machine body, 5/8" milling shaft thread, adapter from 5/8" to M16 thread, suction hood, short and long shaft protector, exhaust nozzle for external suction system, tool set for changing the socket router cutters, tool holder
RPM milling motor one speed 3,000 rpm
Electrical connection in V/Hz/kW 3 x 400 / 50–60 / 2.2
Colour light grey [RAL 7035]
Accent colour anthracite grey [RAL 7016]
Router shaft length 395 mm
Weight 115  kg
Height adjustment No
Sound intensity level 68 dB[A]
Chip suction Connection to a central chip extraction system with a minimum air velocity of 20 m/s [exhaust nozzle diameter 125 mm]

Equipment Connection to an external fan, air curtain, explosion-protected lighting, cabinet
Dimensions WxDxH 1,200 x 750 x 2,200 mm
Air exhaust nozzle Ø 160 mm
Electrical connection in V/Hz/kW 1x 230/ 50/ 0.071
Weight 170 kg
Colour Light grey (RAL 7035)
To be used for Mixing lamination resin, the 758F21 Security storage cabinet can be placed in the cabinet

- Easy handling - the fire blanket automatically unfolds when pulled by the cords.
- Material: coated fiberglass fabric
- Use: smothering and extinguishing incipient fires, deep fryers, deep fryers and people whose clothes are burning
- Includes sturdy bag with eyelet for wall mounting
- Weight: 1 x 1 m, Weight: 950 g
- Tested and certified according to DIN EN 1869: 2001 by MPA Dresden

bar width: 15.5mm
bar thickness: 3.5mm
bar length: 22.5mm (Upper) / 18.5mm (Lower)
Material: Stainless Steel

bar width: 15.5mm
bar thickness: 3.5mm
bar length: 22.5mm (Upper) / 18.5mm (Lower)
Material: Stainless Steel

Used to ensure connection between ankle and foot
Length from joint
center=145mm

3mm / 60mm

3mm / 60mm

2.5mm / 57mm

2.5mm / 57mm

Length from joint
center=40.5mm

Length from joint
center=40.5mm

Length from joint
center=40.5mm

BRAND: ORTHOPUS
This kit includes:
- 5 rubber bands to vary the grip strength
- a washer to block the rotation of the hook on a wrist nut
- one pair of black silicone grips

This type of liners ensures comfort and protection in a rigid laminated or thermoformed socket for patients with low activity level or for first fitting.
We recommend to wear a sock, a sleeve or a jersey as an interface between the skin and the KEASY liner.

This type of liners ensures comfort and protection in a rigid laminated or thermoformed socket for patients with low activity level or for first fitting.
We recommend to wear a sock, a sleeve or a jersey as an interface between the skin and the KEASY liner.

- ethylene vinyl acetate (EVA)
- for shoe-insoles
- for water-resistant splints and supports
- for hand (metacarpus) splints and forerarm splints
- in arm prosthetics, for foot prostheses (e. g. according to Bellmann)
- for prostheses sockets