Special grade for: Stainless steel

To be used for functional plaster casting under weighted conditions
Dimensions WxDxH: 600 x 800 x 1.115 mm
Space requirements: 2,000 x 2,000 mm
Weight (net): 21 kg

To be used for: Taking plaster negatives under load for the fabrication of a TT socket
for: for attachment to 743A11 Ottobock casting frame
Weight: 5.8kg
Scope of delivery:
1x adapter for connection to 743A11 Ottobock plaster device
3x retaining ring for casting tube (110mm, 140mm, 180mm)
1x 743Y760=90 casting tube (90mm)
1x 743Y760=110 casting tube (110mm)
1x 743Y760=140 casting tube (140mm)

4 vacuum forming workstations with connection to a vacuum system, e.g. 755E80=* Mobile vacuum pump with tank, tank integrated in the frame, water trap, 1x shelf with grate, 1x replaceable HPME shelf for cutting and gluing, vacuum pipe holder tilts 90°, foot pedals to control the vacuum, vacuum pipes, recommended vacuum forming output 10m³ per workstation
2500x750x750mm

3-section high / low table with 2 movable sections assisted by gas spring. 65 cm headrest with downward and downward position. Leg section adjustable from 0 ° to 80 °.
- strong and stable frame, for intensive use
- lifting force of 240 kg, therefore suitable for heavy patients
- height: minimum 45 cm (very low!), maximum 98 cm
- standard width: 65 cm
- height adjustable by electric motor controlled by pedal or, as an option, a manual control or a peripheral frame
- long and comfortable nasal opening
- retractable wheels
- leveling for uneven floors
- self-lubricating moving parts ensure quiet operation
- base accessible to patient lifts
- mobile sections assisted by gas spring
- cover available in various colors

Max. static bearing load: 100 kg
Seat height: 440 – 530 mm
Length approx: 380 mm
Height approx: 440 mm
Weight approx: 5.7 kg

Hardener for pedilen foam

Light rigid foam
- expansion factor: approx. 5.0
- density: approx. 100kg/m³
- limited mechanical strength

- to support and relieve the musculoskeletal system
- for fixing dressings
- for immobilization of body members
- for the reduction of hematomas
- for compressive treatment
- high resting pressure, low therapeutic pressure
- textured fabric structure
- cream colour
- gentle on the skin
- breathable
- washable at 40 ° C
- due to the high pressure at rest, the long-stretch bandage should be removed at night and when the patient is at rest

Plastic, 150 mm length

Features:
- sturdy design made of square steel tube
- container made of 1,5 mm sheet metal steel
- plaster discharge in front with slide
- fine allotable plaster quantity with conveyer screw
- cover lid easy to open with safe retention via 2 gas springs
- removable grate with opening device for plaster bags
- lid with dust seal
Technical data:
- dimensions W x D x H: 750 x 750 x 1320 mm
- capacity: 340 litre / 320 kg
- conveyer screw: Ø 95 mm
- pipe: Ø 100 mm
- colour: RAL 7035 light grey

Aluminium, for deep-drawing small models, as a supplement to 755T4=360.

For fine-working plastics and foam materials, consisting of 6 grinding tools and 1 plastic threaded bushing.

Tool used to find exact position of the bore hole on the side bars for the 501T7=7.5x9xM5 Phillips Oval Countersunk Head Screw

Plywood, for leg length comparison,
six parts = 5, 10, 15, 20, 25, and 30 mm thickness.
Format (mm): 320x150
Weight (kg): 3,435

The adapter sleeves are slid onto the 743Y55 alignment axis and positioned in the plaster negative. Adapter sleeve made of rigid foam for receiving the 743Y56 adjustment adapters in the plaster positive.

Ø360mm

Two-jaw ratchet tool holder for clamping drive squares. Sliding handle with groove at each end for locking the stop ball. Chromed carrier block. Reversible left / right or fixed ratchet. All-steel model for high dynamometric load. Tool holders with exact concentricity and tight tolerances. Milled and induction hardened clamping jaws for high toughness and optimum surface hardness.
Suitable for tapping in difficult places.
For other sizes of taps and reamers, see the tables for the corresponding product groups.
Material: All steel
□ capacity: 2.6 mm - 5.5 mm
For hand taps DIN 352: M3 - M10
Total length: 85 mm

Robust, knurled body with interchangeable hardened tip and ergonomic tip for high user comfort. The punching power can be adjusted at will by rotating the tip.
Material (s): Special tool steel.
Total length: 110 mm
⌀ tail: 10 mm
Min impact force: 47 N
Max impact force: 78 N
Material: Special tool steel

Load-bearing capacity: 2.5 t
Load-bearing width: 540 mm
Fork width: 162 mm
Fork length: 1150 mm
Lifting range: 85 - 200 mm
Turning radius: 1270 mm
Load rollers material: Polyurethan
Steering rollers diameter: 200 mm
Steering rollers width: 50 mm
Load rollers diameter: 80 mm
Load rollers width: 70 mm
Length approx: 1540 mm
Width/depth approx: 540 mm
Height approx: 1230 mm
Weight approx: 69 kg

For Range of Motion (ROM) measurements of metacarpal, phalangeal and interphalangeal joints. Linear inch and centimeter markings on both sides of protractor in opposite directions. Protractor measures 0 degree to 150 degree in 5 degree increments.

Professional-quality Goniometer feature clearly marked degree increments and easy-to-read inch and centimeter linear measurements.
Has two 180 degrees scales that read in opposite directions. 14" long. Scales marked in 10 increments. Non-locking friction arm.

The AIREX® Balance-pad is a perfect therapy and training tool made of the famously soft AIREX® foam material. The Balance-pad, with its smooth surface, is perfect for barefoot balance training beginners. This Balance-pad, owing to its thickness of 6 cm, has the desirable destabilizing characteristics. The yielding foam constantly challenges the body to maintain its balance and stabilize the joints. The exercises on this Balance-pad trigger the engagement of a greater number of deeper muscles than the exercises performed without the Balance-pad. The workout on the Balance-pad can purposefully improve both conditional and coordinative abilities, such as strength, endurance, differentiation and balance.

Intended purpose:
The AIREX® products are designed as a movement therapeutic aid for both institutional and domestic use. An object lying on the floor serves as a support for a person during medically indicated and prescribed exercises to improve motor skills and balance or postural control and / or for the therapeutic movement treatment of muscle weakness in the limbs and trunk as a result of a neurological or orthopedic disease.

Certifications: CE, MD, Sanitized, Swissmade
Characteristics: Hygienic, Long-lasting, Multifunctional, Water repellent

The Freman Balance Board is a very practical tool for performing rehabilitation exercises. It allows you to work many muscles. The raised platform also helps to work on balance. Finally, the tray can be used to perform fitness exercises (weight loss, etc.)
Technical characteristics :
- Non-slip tray 40 cm in diameter.
-Height 5 or 8 cm
-Weight supported 100 Kg

Multi-material handle with optimized grip area in terms of torque and comfort. Chrome-vanadium steel blade, chrome-plated

Multi-material handle with optimized grip area in terms of torque and comfort. Chrome-vanadium steel blade, chrome-plated

All cutters have 3 teeth, radial relief.
The flutes are rectified in the mass.
Bevelling cutters in economical execution.
Use:
Precision chamfering cutters for making bevels without facets.

All cutters have 3 teeth, radial relief.
The flutes are rectified in the mass.
Bevelling cutters in economical execution.
Use:
Precision chamfering cutters for making bevels without facets.

All cutters have 3 teeth, radial relief.
The flutes are rectified in the mass.
Bevelling cutters in economical execution.
Use:
Precision chamfering cutters for making bevels without facets.

Sturdy design with long arms, made of tool steel. Points and measuring faces ground and hardened. Solid spindle with adjusting nut for quick and fine adjustment. Annular spring provides constant spring tension.
With replaceable tips.

1/4"

Elbow body; optimized lengths. Maximum hardness while being particularly tenacious thanks to the special PB Swiss Tools alloy.
With ball head that can be used obliquely up to an inclination of 30 °. Chrome-plated surface on nickel.

Elbow body; optimized lengths. Maximum hardness while being particularly tenacious thanks to the special PB Swiss Tools alloy.
With ball head that can be used obliquely up to an inclination of 30 °. Chrome-plated surface on nickel.

Elbow body; optimized lengths. Maximum hardness while being particularly tenacious thanks to the special PB Swiss Tools alloy.
With ball head that can be used obliquely up to an inclination of 30 °. Chrome-plated surface on nickel.

Handy holder in fiber-reinforced plastic with release button.
Contents:
1 spanner each: 2; 2.5; 3; 4; 5; 6; 8 mm

STANDARD AND ECONOMY VERTICALIZATION TABLES CHARACTERISTICS:
lifting force of 225 kg, therefore suitable for heavy patients
height and righting by electric motor with manual control
large wheels and centrally controlled brakes on the Standard model, wheels with individual brakes on the Economy model
the double foot support can be individually tilted from + 15 ° to -30 °
supplied with retractable handles and set of fixing straps depending on the model
Adjustable work table on the Standard model (option for Economy model)
goniometer for reading the inclination
90 ° full standing position
minimum height 47 cm and maximum 101 cm
base accessible to patient lifts
self-lubricating moving parts ensure quiet operation
standard width: 70 cm
cover available in various colors

beige color