1 flat, 1 concave, 1 convex

Stainless Steel

Stainless Steel

Stainless Steel

Stainless Steel

Stainless Steel

Can be shaped easily.
Can be worked with hot water or with a heat gun.
Perfectly matches the patient's shapes.
Good weldability.
Lightweight and resistant.
Can be used on a model or directly on the patient who has been previously protected with Jersey.
> For finger and wrist splints

Set of 3 sheets
Can be shaped easily.
Can be worked with hot water or with a heat gun.
Perfectly matches the patient's shapes.
Good weldability.
Lightweight and resistant.
Can be used on a model or directly on the patient who has been previously protected with Jersey.
> For finger and wrist splints

Stretchable, breathable, comfortable 3D fabric
Waterproof thanks to the associated flexible film
Very comfortable and soft to the touch
Ideal for making covers with waterproof areas.
Easy to clean, washable at 30°C/86°F without spinning

Stretchable, breathable, comfortable 3D fabric
Waterproof thanks to the associated flexible film
Very comfortable and soft to the touch
Ideal for making covers with waterproof areas.
Easy to clean, washable at 30°C/86°F without spinning

Its texture allows it to breathe and to drain perspiration.
Very comfortable and soft to the touch
Easy to clean, washable at 40°C / 100°F.
Good ageing
Glue-less, this fabric complies with sustainable development policies and limits risks of allergy
Thermoformable at 170°C / 340°F.

Its texture allows it to breathe and to drain perspiration.
Very comfortable and soft to the touch
Easy to clean, washable at 40°C / 100°F.
Good ageing
Glue-less, this fabric complies with sustainable development policies and limits risks of allergy
Thermoformable at 170°C / 340°F.

- for heating thermoplastics (low temperature PE)
- good insulation of the device ensures rapid heating of the water
- with a cover
- dimensions 600 x 400 x 200 mm, 15 liters
- 230V

220V / 50Hz / 0,2 kW
Teflon coated as protection, range of regulation: 100-180°C
with stand and 1,40m cable

Clear view visor of polycarbonate.
Thickness 1.0 mm, flat flexible screen.

Light-weight headgear to allow use of a face protection visor in areas where head protection is not required. With foam padding and rotary lock for size adjustment. Angular adjustment of the visor

Fully hardened and tempered. Blade uniformly through hardened; can be repeatedly reground without re-hardening. Head specially annealed to prevent splintering. Special quality, i.e. highest possible tip hardness (approx. 59 HRC) with exceptional toughness.
Chrome vanadium special alloy. Surface chrome-plated.

Fully hardened and tempered. Blade uniformly through hardened; can be repeatedly reground without re-hardening. Head specially annealed to prevent splintering. Special quality, i.e. highest possible tip hardness (approx. 59 HRC) with exceptional toughness.
Chrome vanadium special alloy. Surface chrome-plated.

Presentation in: Steel case
Length: 445 mm
Width: 187mm
Height: 51 mm
Number of rooms: 23
Hex key openings range: 10-34 mm
Drive profile: Hex socket wrench
Drive square: 1/2 inch
74-01217

Narrow shape with profiled body in double T (chrome). 22 ° jaw position. Forged and hardened. With graduation on the jaws.
Maximum opening: 34mm
Total length: 300mm

Vice jaws of extruded aluminium With integrated permanent magnets, suitable for all vices of corresponding jaw width. Unique clamping force due to large magnet area.
Clamping faces smooth.
Suitable for: All vice models.
New version with 50% more gripping power.
Jaw width: 100 mm
Type of fastening: Permanent magnet
Type of clamping face: smooth

Mixer for paints and coatings. Mixer with hexagon profile for clamping in a mandrel.
Up to 20 kg, 10 mm hexagon

Allowable shelf load: 150 kg
Dimensions: 1000x500x25mm

Backrest tiltable at 30 ° assisted by gas spring.
Supplied with headrest and equipped with 2 fixed armrests (black polyurethane foam).
Steel tube frame.
Cloud gray polyester epoxy coating.
Armrest cover optional, specify when ordering.
Seat width: 48 cm
Backrest: 47 cm.
Seat height: 53 cm
Height (headrest included) in vertical position: 134 cm
Weight: 25 kg
Supported weight: 200 kg

Drawer with stop to prevent it from coming out entirely from its location.
The drawer is designed for A4 size documents

You can optimally lean against the fact that the inclination tension, which is easily adjustable with an Allen key, allows you to adapt the resistance to your movements and your weight.
The integrated lumbar support provides additional back support and comfort.
The adjustable height and the seat with a thick layer of cold-molded polyurethane foam provide a comfortable position.
This chair has been tested for home and office use and meets the requirements specified in standards EN 1022, EN 16139 and ANSI / BIFMA x5.1 in terms of safety, resistance and stability

The rocking mechanism with stop is adjustable for better stability in different seating positions.
The safety casters have an automatic locking mechanism when there is no weight on the chair, which prevents the chair from moving when you get up. The casters unlock as soon as you sit down.
The height of the chair is adjustable and provides great seating comfort.
The integrated lumbar support provides additional back support and comfort.
The mesh material of the backrest allows efficient air circulation.
This chair has been tested for office use and meets the requirements specified in standards EN 1335 and ANSI / BIFMA x5.1 in terms of resistance and stability

Melamine top, 25 mm thick. L-shaped base adjustable in height with perforated side cover, aluminum color RAL 9006. Leveling cylinders.
Vertical electrification behind the removable covers and horizontal by cable trunking

The mirror has a shatterproof film on the back, which reduces the risk of injury if the glass breaks
Can be used horizontally or vertically
Suitable in damp rooms

Product type: wall painting
Surface: enameled
Frame material: aluminum

Practical desk table with progressive height adjustment (adjustment range 680 - 820 mm).
Robust support with crosspieces.
Base in 2 mm profile tube, 50/50 mm, square.
Optimal foot space thanks to the ergonomic structure.
Light gray 25 mm thick melamine top.
Metallic gray base, powder coated.
Workstation height adjustment: 680-820 mm
Worktop thickness: 25 mm
Width: 2,000 mm
Depth: 800mm

fitted with 2 fluorescent lamps of 25 W
consumption: 50 W
screen: 72 x 43 cm
dimensions: 76 x 51 cm

220V power supply. Dimensions: 45 x 40.5 x 16 cm
Based on the prince of light transmission for optical fiber, the assembly of the platform was developed by the equal and sees the image reflected on the interior mirror support. The quality of the bending and contact rendering allows you to obtain precise diagnoses. Very robust (15 mm thick acrylic glass), this podoscope also has a modern and elegant design

No of places: 3
Seat height: 44 cm
Seat depth: 45 cm
Seat width: 48 cm
Overall height: 81.6 cm
Overall width: 188 cm
Material: Steel

Casings and doors made of 0.9 mm sheet steel, shelves can be accommodated in steps of 40 mm. Reinforced doors internally and lockable by a sliding handle with cylinder lock. Complete with 4 shelves in galvanized sheet metal.
RAL 7035 light gray body, RAL 7016 anthracite doors, powder coated.
Cylinder lock
Allowable load interior cabinet body: 500 kg
Permissible shelf load / Maximum load per rack distributed over the surface (on the metal): 80 kg
Width: 950mm
Depth: 430mm
Height: 1950 mm

Aluminium five-point star base (⌀ 580 mm). Continuous height adjustment by gas pressure spring. Seat of SoftTouch PU foam with ribbed profile. Soft seat with non-slip surface, ribbed profile allows air circulation (climate comfort). Ergonomic backrest (height 190 mm) supports correct posture. PU foam, soft, comfortable, washable.
Application:
Ideal combination of standing and sitting. For use at sitting or standing workstations, or a combination of both.
Work stool version with castors for hard floors.

⌀: 310mm
Height: 320mm

Ideal for storing plaster molds and models
Allowable shelf load: 150 kg
Number of shelves: 5
Dimensions: 1060x536x2000mm
Total maximum load: 1300 kg

Voltage tester, Cap square 150X100mm, Straight carbide tracing point, Steel rulers 300mm, Calipers 150mm, Measuring tapes: 2,5 meters, Laser meter, Bubble levels, Plastic folding rule, Lid tray , Plastic transport box

74-01079