Build height: 10mm
Maximum patient weight: 100kg
Material: Aluminium
Weight: 88g

Build Height: 10mm
Maximum patient weight: 125kg
Material: stainless steel
Weight: 150g

Build height: 10mm
Maximum patient weight: 150kg
Material: Titanium
Weight: 88g

Lock 7H08A is intended for use in tibia (including for the manufacture of sockets according to express prosthetics technology) and femur prosthesis.
The principle of locking is the same as for the lock 7H 05A. Consists of an insert with a hemisphere and an area under 4 holes (installed on plaster positive before lamination or thermoforming) and the lock case (installed during assembly of the prosthesis on the outside of the socket). In the distal part of the lock there are holes for mounting adapter - 7H01K, 7H02K, or 7H03K. Complete with 8 steel screws, plastic cone and screw for locking an insert on the positive.
Activity level: М1, М2, М3, М4
Maximum weight of patient: 125kg
Material: Aluminum alloy
Maximum weight of patient: 125kg
Weight 175g

Drawer with stop to prevent it from coming out entirely from its location.
The drawer is designed for A4 size documents

-weights for wrists and ankles
-delivered by pair
-suitable for fitness exercises and endurance training at home
-made of neoprene
-reinforced with cotton ribbon
-adjustable velcro strap

More intelligent
Integrates the information of the Multi-axes G sensor and a Magnetic sensor to estimate the 3D posture of the prosthesis and the gait cadence up to a rate of 200 times per second.

Microprocessor
Microprocessor accumulates and analyzes information from the G sensor and then evaluates the user's gait pattern.

Best Control
After receiving the signals from the microprocessor, the pneumatic cylinder provides optimal resistance for recreating natural gait patterns.

5-Bar design
Provides shock absorption of the knee, and enhancing stability of the joint dramatically without knee buckling by shifts the ICR posteriorly.

More easily way for setting (New!)
Provides the Auto and Manual modes for adjusting the joint resistance. In the Auto mode, custom set the resistance patterns only by the remote controller.

The EVA foam cover which possesses the features of light-weight,
water-proof and anti-aging is preshaped as an exoskeletal shank for
the AK modular system.

10x800x550mm

Include:
PR08.KP - Axillary Protector
PR08.KE - Webbing
PR08.YY - Cable Housing
PR08.YG - Eyelet Cable Anchor
PR08.KT - Plastic Hanger
PR08.BP - Coupling Unit
PR08.KV - Threaded Sleeve

set of 22 sizes, left and right (44 pieces)

Flexible colored foam, preshaped for modular transfemoral protheses. Should only be used with modular knee joints with internal ewtension assists.
Knee flexion: 15°

Suitable to use on above knee prostheses. Features a hole (diameter: 22mm)

beige color

beige color

beige color

Build height: 30,4mm
Maximum patient weight: 125kg
Material: Titanium
Weight: 210g

M16

Swinging honing machine with funnel-type milling machine
All models we offer-ensure the highest efficiency, versatility and safety
All the models can be fitted with suction device
Weight: 100 Kg
Headphones mandatory (according to DIN EN 352)

380V, 1.2 - 1.7kW / 1400 - 2800 rpm

also referenced under: OOMAMARP3000, CRM 85

Densely woven cotton cloth evenly spread with synthetic resin bonded Aluminium Oxide (A). Very good grit bonding, high abrasion performance and long service life.
Type VSM KK 114 F: Brown fabric, for extremely demanding applications. This grade is particularly supple, resistant to oil and petroleum and can be torn in longitudinal direction to yield clean edges without fraying.
Packaging tape with integral tear-off cutter.
Application:
Predominantly for rubbing down metals by hand, but also suitable for all other materials.

Thick cotton pad with abrasive grain of normal corundum

Very strong and flexible latex paper evenly spread with Silicon Carbide (SiC). Good grit bonding, high abrasion force and long service life.
Sheet size 230×280 mm.
Primarily for rubbing down by hand in bodywork building, repair workshops, and paint shops, for fine rubbing down of varnished or filled areas.
Grinding media: Silicon carbide
Grinding medium code: SiC
Grit: 150
Grit designation: medium
Manufacturer's designation: 911 C

also referenced under: OOMAMARPOL3500A, OOMAMARPOL3500C CRM 90, CRM 90.1

also referenced under: OOMAMARP3000N, CRM 92.1

also referenced under: OOMAMARP3000O, CRM 92.2

also referenced under: OOMAMARP3000C, CRM 92

The adapter sleeves are slid onto the 743Y55 alignment axis and positioned in the plaster negative. Adapter sleeve made of rigid foam for receiving the 743Y56 adjustment adapters in the plaster positive.

Adapter tubes used to connect lower extremity modular prosthetic parts.

Adapter tubes used to connect lower extremity modular prosthetic parts.

Adapter tubes with 10° contoured head used to connect lower extremity modular prosthetic parts.

Adapter tubes used to connect lower extremity modular prosthetic parts.

also referenced under: OCPOMODUZ00021, 2R2

Adapter tubes used to connect lower extremity modular prosthetic parts.

also referenced under: OCPOMODUZ00021, 2R2

Adapter tubes used to connect lower extremity modular prosthetic parts.