Light-weight and powerful 115 mm one-hand angle grinder in handy compact design, drive head can be rotated in 90° steps, quick adjustment of protective cover, M14 grinding spindle thread.
800 W motor, slim easy-grip casing, restart inhibit.
Supplied with protective hood, clamping set and additional handle.
Power consumption: 800 W
Speed range: 12,000 min-1
maximum disc ⌀: 115 mm
maximum cutting depth: 28 mm
Weight: 1.9 kg
maximum vibration to EN: 4.2 m/s2
Restart block: yes

2200 W / 230 mm angle grinder with start-up current limitation and restart inhibit.
Supplied with:
Supplied with protective hood, additional handle, clamping set.
maximum disc ⌀: 230 mm
maximum speed: 6,600 min-1
Restart block: yes
maximum vibration to EN: 8.7 m/s2
Weight: 5.2 kg
Power consumption: 2,200 W
maximum cutting depth: 68 mm
Manufacturer's designation: WS22-230E

1 straight and 1 angled point; nylon handle. Point hardness 48 - 55 HRC.
overall length: 230 mm
Type of product: Steel scriber

10°
max. 125kg

2.5mm / 57mm

Length from joint
center=40.5mm

Length from joint
center=40.5mm

2.5mm / 57mm

3mm / 60mm

Length from joint
center=40.5mm

Length from joint
center=40.5mm

3mm / 60mm

The size of the foldable noise canceling headphones can be easily reduced to pocket size. Thin, padded headband to reduce heat build-up. SNR 32 dB (H = 36 dB; M = 30 dB; L = 22 dB)

also referenced under: OTOOPROTE, CRM 425

510 x 380 x 550 mm

D 325/L 600mm

To be used for three-dimensional alignment of leg orthoses and positioning of knee and ankle joint points on a plaster negative or plaster positive.
Dimensions WxDxH: 270 x 380 x 770 mm

CM1 / B10

4 x 6
4 x 8
4 x 12

85/110mm

also referenced under: OOMAOWELMA08, CRM 17

85/110mm

also referenced under: OOMAOWELMA07, CRM 16

Robust, knurled body with interchangeable hardened tip and ergonomic tip for high user comfort. The punching power can be adjusted at will by rotating the tip.
Material (s): Special tool steel.
Total length: 110 mm
⌀ tail: 10 mm
Min impact force: 47 N
Max impact force: 78 N
Material: Special tool steel

- Designed for demanding continuous use when oil-free and clean compressed air is required
- Air is blown through the cooling chambers of the cylinder by means of a fan; thus optimum cooling is achieved
- Large piston, movably mounted, resulting in 60% more power compared to tilt piston systems
- Cylinder running surfaces with high-precision and micro-smooth surface for minimum friction
- The high-performance piston or piston ring made of a graphite-Teflon-carbon special compound has a much longer service life than a simple piston ring made of Teflon
High-quality maximum equipment
- Filter pressure regulator for stepless adjustment of the working pressure, with simultaneous dirt, oil and condensate separation
- One compressed air outlet each for filtered compressed air, filtered and oiled compressed air and a direct outlet on the compressed air tank
- Two comfort safety quick couplings
- High-quality CONDOR pressure switch
- One pressure gauge each for container and working pressure
- Simple condensate drain via ball valve
Compressed air lines and reservoirs with long service life
- Flexible armored hose line with heat protection prevents vibration fractures
- Inside and outside hot-dip galvanized, corrosion-protected compressed air tank with 15-year guarantee against rusting through
Comfort safety quick couplings
- One-hand safety couplings according to DIN EN 983 used as standard by AIRCRAFT as first manufacturer
- Two separate locking systems for maximum working safety
- No whipping of the hose line during uncoupling
Convenient transport
- Transport back-friendly in upright position and without lifting
- Additional transport handle directly on the container
- Puncture-proof PU foam wheels
- Stable steering chassis with parking brake
TÜV-free
- Type-tested by an approved monitoring body
- Recurring container inspections also possible by a competent person
Immediately ready for use
- Fully automatic on-off operation
- With all safety devices
- Completely ready for connection

also referenced under: AIRPROFI 440/100 OF PRO, EMACAIRCO380, CRM 178

- Designed for demanding continuous use when oil-free and clean compressed air is required
- Air is blown through the cooling chambers of the cylinder by means of a fan; thus optimum cooling is achieved
- Large piston, movably mounted, resulting in 60% more power compared to tilt piston systems
- Cylinder running surfaces with high-precision and micro-smooth surface for minimum friction
- The high-performance piston or piston ring made of a graphite-Teflon-carbon special compound has a much longer service life than a simple piston ring made of Teflon
High-quality maximum equipment
- Filter pressure regulator for stepless adjustment of the working pressure, with simultaneous separation of dirt, oil and condensate
- One compressed air outlet each for filtered compressed air, filtered and oiled compressed air and a direct outlet on the compressed air tank
- Two comfort safety quick couplings
- High-quality CONDOR pressure switch
- One pressure gauge each for tank and working pressure
- Simple condensate drain via ball valve
Compressed air lines and reservoirs with long service life
- Flexible armored hose line with heat protection prevents vibration fractures
- Inside and outside hot-dip galvanized, corrosion-protected compressed air reservoir with 15-year warranty against rusting through
Comfort safety quick couplings
- One-hand safety couplings according to DIN EN 983 used by AIRCRAFT as the first manufacturer in series production
- Two separate locking systems for maximum working safety
- No whipping of the hose line during uncoupling
Convenient transport
- Transport back-friendly in upright position and without lifting
- Additional transport handle directly on the container
- Puncture-proof PU foam wheels
- Stable steering chassis with parking brake
Immediately ready for use
- Fully automatic on-off operation
- With all safety devices
- Completely ready for connection

also referenced under: AIRPROFI 220/50 OF PRO, CRM 178.3

Effective delivery volume approx: 1000 l/min
Maximum Pressure: 10 bar
Pressure vessel capacity: 500 l
Air outlet: ¾ "
Length approx: 1980 mm
Width/depth approx: 700 mm
Height approx: 1630 mm
Weight approx: 307 kg
Absorbed power electric motor: 7.5 kW
Supply voltage: 400 V
Mains frequency: 50 Hz
Motor type: Electric
Sound pressure level Lp: 68 dB(A)

Our axillary crutches are available in 3
sizes, handles and height are adjustable.
High-density rubber cushions provide
greater comfort in case of long wear.
They are made of lightweight aluminium.
Height handle/floor: 113/133cm

Our axillary crutches are available in 3
sizes, handles and height are adjustable.
High-density rubber cushions provide
greater comfort in case of long wear.
They are made of lightweight aluminium.
Height handle/floor: 132/152cm

Our axillary crutches are available in 3
sizes, handles and height are adjustable.
High-density rubber cushions provide
greater comfort in case of long wear.
They are made of lightweight aluminium.
Height handle/floor: 93/113cm

The EVA foam cover which possesses the features of light-weight,
water-proof and anti-aging is preshaped as an exoskeletal shank for
the BK modular system.

• Suspension sleeve but not for vacuum
• Two way stretch
• Caucasian skin color

for attaching decorative fabrics, posters, labels, nonwovens, oiled papers and tar papers, PC8000

for attaching decorative fabrics, posters, labels, nonwovens, oiled papers and tar papers, PC8000

Designed for balance training - enhances balance sense, coordination, reaction, and motor skills.

Also used for muscle exercise.
Adjustable difficulty level based on inflation.
Diameter: 45cm

Designed for balance training - enhances balance sense, coordination, reaction, and motor skills.

Also used for muscle exercise.
Adjustable difficulty level based on inflation.
Diameter: 60 cm

The Freman Balance Board is a very practical tool for performing rehabilitation exercises. It allows you to work many muscles. The raised platform also helps to work on balance. Finally, the tray can be used to perform fitness exercises (weight loss, etc.)
Technical characteristics :
- Non-slip tray 40 cm in diameter.
-Height 5 or 8 cm
-Weight supported 100 Kg

The AIREX® Balance-pad is a perfect therapy and training tool made of the famously soft AIREX® foam material. The Balance-pad, with its smooth surface, is perfect for barefoot balance training beginners. This Balance-pad, owing to its thickness of 6 cm, has the desirable destabilizing characteristics. The yielding foam constantly challenges the body to maintain its balance and stabilize the joints. The exercises on this Balance-pad trigger the engagement of a greater number of deeper muscles than the exercises performed without the Balance-pad. The workout on the Balance-pad can purposefully improve both conditional and coordinative abilities, such as strength, endurance, differentiation and balance.

Intended purpose:
The AIREX® products are designed as a movement therapeutic aid for both institutional and domestic use. An object lying on the floor serves as a support for a person during medically indicated and prescribed exercises to improve motor skills and balance or postural control and / or for the therapeutic movement treatment of muscle weakness in the limbs and trunk as a result of a neurological or orthopedic disease.

Certifications: CE, MD, Sanitized, Swissmade
Characteristics: Hygienic, Long-lasting, Multifunctional, Water repellent