also referenced under: OOMAMARP3000H, CRM 97

Thick cotton pad with abrasive grain of normal corundum

For the final finishing of prosthetic components

For the final finishing of prosthetic components

For the final finishing of prosthetic components
1 piece silicone sanding cone 5/8", conical
1 piece silicone sanding cone 5/8", conical, narrow
1 piece silicone sanding cone 5/8", cylindrical round with grooves
1 piece silicone sanding cone 5/8", cylindrical round
1 piece silicone sanding cone 5/8", double cone
1 stand

also referenced under: OOMAMARP3000F, CRM 95

also referenced under: OOMAMARP3000J, CRM 99

made of premium steel, forged, hardened and sharpened, concave ground cutting edge, PVC blade guard, blade length 240mm, blade width 30mm, weight 400g
74-00711, 718H12

74-01204

The black blade ‑ Lutz® multisharp, premium hardened blades with ultra-sharp ground edges.
Extra-fine and ultra-sharp ground blade.
Blade length: 100 mm
Blade width: 18 mm
Blade thickness: 0.5 mm
Number of snap-off points: 8
Number of blades: 10

Mango de madera

Multimatized handle with grip zone optimized for torque and comfort
74-01212

ETOOFILEYRBL

for widening holes, shaping or planing concave surfaces, very ideal for turner work, yellow plastic handle, black hand rest (can be disassembled)
74-01755

ETOOFILEYSHB

for hardwood, softwood, vinyl, nylon, plaster, chalk, chipboard, linoleum, rubber, thermalite, fiberglass

ETOOFILEYSSB, 716Y1

ideal tool for file work, black metal body, sturdy yellow plastic handle
74-00888

With sharp drill point, pre-drilling not necessary. Conically increasing cutting edges and radially relief ground circumference for a paring cut. With scale in the flutes. Three drive flats on the shank.
Set of 3 conical sheet and tube drills and 1 cutting compound No. 118160 in a case.
Leaves no burr or chatter marks.
Sheet metal 0.1 − 2 mm, stainless steel 0.1 − 1 mm, non-ferrous metals: 0.1 − 5 mm, plastics up to 10 mm.
1x each taper sheet and tube drill: Size 3 -14; 8 − 20; 16 − 30.5

Countersink sets, in a case.
Practical set for assembly and workshop use.
Content table use:
1× each countersink: Size 6; 8; 10; 11.5; 15; 19
Number of countersinks: 6
Countersink tip angle: 90 degrees
Tool material: HSS
Number of cutting edges Z: 3

HSS, 19 pieces, D 1 to 10mm by step of 0.5mm

HSS, 25 pieces, D 1 to 13mm by step of 0.5mm

«SACH» Foot 1H02AC is intended for patients with unilateral or bilateral transfemoral amputation at all levels or transtibial amputation on the boundary of the upper, medium and lower-third, can be used in prostheses after the disarticulation of the knee or hip joint.
«SACH» Foot has a plastic embedded insert in the forefoot, which ensures its elasticity and durability. The foot is produced in right and left versions. «SACH» Foot 1H02AC is supplied assembled with foot adapter 2H01AC.
Activity level: M1,M2
Maximum weight of patient: 100kg

Build height: 8mm
Maximum patient weight: 125kg
Material: Stainless steel
Weight: 133g

Polycentric Knee Joint 6H01 is intended for patients with low and moderate activity.
The joint is used in hip prostheses for patients with above the knee amputations, including transfemoral disarticulation.
The kinematics of joint allows to achieve a functional shortening of the prosthesis in the swing phase.
Adjustable flexion — extension assist improves control of swing phase.
Ball bearings used in the knee joint do not require maintenance and ensure high reliability and increasing resource of knee joint.
Activity level: М1,М2, М3
Maximum flexion angle: 135°
Maximum Weight of patient: 125kg/150kg
Material: Stainless steel/Titanium
Weight: 673g/470g

Strong head, laid-on joint. Jaws chemically blacked, polished head, plastic coated handles. Cutting edges induction hardened (approx. 61 HRC).
Standard: DIN ISO 5748
Material: Special tool steel, drop-forged, and oil-hardened.
overall length: 180 mm
Cutting capacity soft wire up to ⌀4 mm
Cutting capacity hard wire up to ⌀2.5 mm
ETOOPLIEDAC180

Strong head, laid-on joint. Jaws chemically blacked, polished head, plastic coated handles. Cutting edges induction hardened (approx. 61 HRC).
Standard: DIN ISO 5748
Material: Special tool steel, drop-forged, and oil-hardened.
overall length: 200 mm
Cutting capacity soft wire up to ⌀4 mm
Cutting capacity hard wire up to ⌀2.8 mm

Serrated jaws. Cutting edges additionally induction hardened (approx. 64 HRC); suitable even for piano wire.
Jaws bright finished, plastic coated handles.
Standard: DIN ISO 5746
Material: Chrome vanadium steel, drop forged.
overall length: 160 mm
Cutting capacity hard wire up to ⌀: 2 mm
Cutting capacity piano wire up to ⌀: 1.5 mm
Jaw characteristics: inner face serrated
Handle: plastic coated
Manufacturing process: Cutting edges induction hardened (approx. 64 HRC), pliers body drop forged
Material: Chrome vanadium steel
ETOOPLIEUN160EC
74-00871

Considerable cutting performance with little effort. Serrated jaws. Cutting edges additionally induction hardened (approx. 63 HRC); also suitable for piano wire.
Jaws chemically blacked, polished head, plastic coated handles.
overall length: 225 mm
Cutting capacity hard wire up to ⌀3mm
Cutting capacity piano wire up to ⌀2.5 mm

Box joint (= double guides). Designed to prevent fingers being trapped. Induction hardened. Notched serrated jaws, adjustable in stepped holes. Multi-position ratchet adjustment.
Red powder-coated, polished jaws and joint.
Standard: DIN ISO 8976
Material: Chrome vanadium steel, drop forged.
overall length: 250 mm
Hexagon across flats: 36 mm
Jaw capacity for pipes: 1.1/2 inch
ETOOPLIEMU25
74-00785

Designed for Orthopedics workshops
Manual height adjustment, milling shaft horizontally and vertically
adjustable, continuous speed control, M.16 milling shaft thread, adapter from M.16

Dimension : Out Side W.50—D.50—H.40 cm
Power Supply 220 Volt 50 Hz
Power cord With CEE plug 3 × 16 A and CEE socket 3× 16 A
Sound intensity level 80 dB(A)
Electrical connection 220 V 50 Hz 1500 Watt
Motor RPM Variable rotation speed, min. 0 to max. 3000 RPM
Connecting cable 3x2,5 mm2 3 mt
Router shaft length and Type 500 mm 30 to 35 mm ( Conic 220 mm )
Suction head hose 100 mm plastic ,flexible
Scope of delivery Exhaust arm with suction hood (Ø 100 mm +hose )
Color Rall 7035 & 7045
Weight Net 42 Kg

Functions and benefits
The Heavy Duty Nut, M8, Long Stump, is part of the Rehab'Impulse modular system and is designed to provide compatibility with our adult long stump kit and the Foot SACH 2.0 Adult. It is intended for adults with a long residual limb.

Intended use
The Rehab'Impulse Heavy Duty Nut, M8, Long Stump, adult, is intended for prosthetic fitting of users with a body weight of up to 80 kg (P4). This product is not intended for excessive physical activities.

Compatibility
• 74-00229 Module System, Adult - Long Stump
• Foot SACH 2.0 Adult – sizes 14 to 21

Included in delivery
• 10x Heavy Duty Nut, M8

Storage conditions
• Store product in dry conditions

Environmental conditions
Recommended environmental conditions:

• Avoid exposure to dust, sand, salt water, acids and urine

Functions and benefits
The Heavy Duty Nut, M10, Long Stump, is part of the Rehab'Impulse modular system and is designed to provide compatibility with our adult long stump kit and the Foot SACH 2.0 Adult. It is intended for adults with a long residual limb.

Intended use
The Rehab'Impulse Heavy Duty Nut, M10, Long Stump, adult, is intended for prosthetic fitting of users with a body weight of up to 80 kg (P4). This product is not intended for excessive physical activities.

Compatibility
• 74-00229 Module System, Adult - Long Stump
• Foot SACH 2.0 Adult – sizes 22 to 28

Included in delivery
• 10x Heavy Duty Nut, M10

Storage conditions
• Store product in dry conditions

Environmental conditions
Recommended environmental conditions:

• Avoid exposure to dust, sand, salt water, acids and urine

• 10x Rubber Bumpers
• 10x Screw, M4, Stainless Steel

• 10x Rubber Bumpers
• 10x Screw, M5, Stainless Steel

Functions and benefits
The Pyramid Adapter, Knee Joint, Adult, is part of the Rehab'Impulse modular system and is designed to provide compatibility with standard modular tube clamp adapters used as interface with common modular hip joints.

Intended use
The Rehab'Impulse knee joint pyramid adapter, adult, is intended for prosthetic fitting of users with a body weight of up to 80 kg (P4). This product is not intended for excessive physical activities.

Compatibility
- 74-00243 Knee Joint, Monocentric, Adult, Beige
- 74-00244 Knee Joint, Monocentric, Adult, Olive
- 74-00245 Knee Joint, Monocentric, Adult, Terra
- 74-00246 Knee Joint, Polycentric, Adult, Beige
- 74-00247 Knee Joint, Polycentric, Adult, Olive
- 74-00248 Knee Joint, Polycentric, Adult, Terra

Included in delivery
- 1x Pyramid
- 1x Threaded pin M8/M10
- 1x Hexagonal Nut, SS, M8

Storage conditions
- Store product in dry conditions
- Store at room temperature (ideally between 15°C and 25°C)
- Keep out of direct sunlight or other sources of light with a high UV content
- Take precautionary measures against sparking and fire

Environmental conditions
Recommended environmental conditions:
- Temperature range for use : -10°C to 60°C (14°F to 140°F)
- Relative humidity 0% to 90%, no condensing situation
- Avoid exposure to dust, sand, salt water, acids and urine

Parts are specifically for the Liberty wheelchair.

Includes:

5 sets of Abductors
2 sets of Footrest Extensions
Package Information: 60 x 20 x 18cm; one unit per carton

The parts in this kit are specifically designed for the Liberty II wheelchair and are not guaranteed to function on other wheelchairs. Parts are meant for new modifications, not repairs.

6 abductor sets (foam pad, attachment brackets and hardware)
4 “L” brackets, each with pad and cover
8 “U” offset brackets, each with pad and cover
4 anti-tippers
2 400 mm x 360 mm x 20 mm firm foam inserts (for pre-seat bone shelf)
1 knife to cut foam
8 feet straps with plastic clips
4 footrest extensions with hardware
12 spoke covers with hardware

The parts in this kit are specifically designed for the Liberty II wheelchair and are not guaranteed to function on other wheelchairs.

2 complete hardware sets for the frame
2 complete hardware sets for the seat unit
2 headrest pads with cover
1 small backrest cushion cover
1 medium backrest cushion cover
1 large backrest cushion cover
1 small seat cushion cover
1 medium seat cushion cover
1 large seat cushion cover
4 abductor pads with cover
4 lateral support pads with cover
4 lateral support covers
3 pelvic straps (without metal flat mount)
1 small chest harness (without metal flat mount)
1 medium chest harness (without metal flat mount)
1 large chest harness (without metal flat mount)
2 hand grips
4 m Loop Velcro strip (5 cm width with sticky tape)
4 seat pan clamps
2 400 mm x 360 mm x 20 mm firm foam inserts (for pre-seat bone shelf)
2 calf straps
4 quick-release axles
20 bearings (6202)
1 wheel-lock assembly (1 left hand / 1 right hand)
4 rear wheel bearing covers
20 small plastic caps for 19 mm tubes (armrest)
20 small plastic caps for 22 mm tubes (frame tube)
20 small plastic caps for 15 mm tubes (rear wheel axle)
20 small plastic caps for 38 mm tubes (caster)
20 small plastic caps for 16 mm square tubes (headrest)
30 plastic mounting screws for spoke covers
Certification: ISO 13485

Designed to provide the resources needed for repairs and maintenance on one wheelchair
Tools can be used on most wheelchairs. Repair kit for use on pneumatic tires.
1 Air pump
2 Hex wrenches (10 mm x 13 mm)
1 Hex wrench (19 mm)
1 Socket and Phillips (19 mm x 17 mm)
1 Socket wrench (10 mm)
1 Tire patch kit

The parts in this kit are specifically designed for the Motivation Moti-Go and are not guaranteed to function on other wheelchairs.

- Fabric sling style seat provides a supportive and comfortable seating position on any wheelchair
- Seat length can be cut down to size for a custom fit
- All users: those at high risk of pressure sores and those who prefer additional padding for comfort and postural support

- Fabric sling style seat provides a supportive and comfortable seating position on any wheelchair
- Seat length can be cut down to size for a custom fit
- All users: those at high risk of pressure sores and those who prefer additional padding for comfort and postural support

- Fabric sling style seat provides a supportive and comfortable seating position on any wheelchair
- Seat length can be cut down to size for a custom fit
- All users: those at high risk of pressure sores and those who prefer additional padding for comfort and postural support

- Fabric sling style seat provides a supportive and comfortable seating position on any wheelchair
- Seat length can be cut down to size for a custom fit
- All users: those at high risk of pressure sores and those who prefer additional padding for comfort and postural support

Include:
PR08.KP - Axillary Protector
PR08.KE - Webbing
PR08.YY - Cable Housing
PR08.YG - Eyelet Cable Anchor
PR08.KT - Plastic Hanger
PR08.BP - Coupling Unit
PR08.KV - Threaded Sleeve