This shoe is suitable for post-operative phases and in the presence of wounds. It can be used with a bandaged foot during long healing periods to reduce load on the foot while walking.

It is very stable thanks to the thermoformable heel counter, yet remains lightweight.

The open toe design makes it particularly suitable for forefoot deformities.

When combined with the S-Rigid insole, it can be used for secondary prevention in risk levels 2 and 3.

Upper made of microfiber.

Indications:
- Metatarsalgia, vascular disorders
- Rheumatic foot
- Diabetic foot (with S-Rigid insole)

Cotton-latex (elastodiene), covered with polyamide thread

Dimensions:
400 x 300 x 250 mm
Inner diameter:
300 – 550 mm

including silicone sealing ring and assembly parts

lumbar traction unit suitable for professional and private use

Features
compact and simple to use on a treatment couch, on the floor or bed
easy to install, the unit is unfolded and the patient is fastened by means of two solid belts
a special pump design incorporates an easy “click into place” mechanism for pumping, sustaining, and releasing the traction
friction-free surface ensures smooth motion
force is shown on manometer in pounds and kg
maximum traction: 90 kg
dimensions folded: 57,5 x 60 x 7,5 cm

⌀50mm

4x1000x1000mm

ALPS® EasyLiner® contains a prolonged-released
antioxidant, an effective scavenger of free radicals and
hydroxyl groups, with beneficial effects on the skin.
It provides the softness, strength, and cushioning from
its use of ALPS® EasyGel, relieving the residual limb
from the stress created by vertical and shear forces.
It delicately conforms to the shape of the residual limb
without restricting blood flow. It can be easily donned
even by geriatric patients and users with reduced
manual dexterity.

ALPS® EasyLiner® contains a prolonged-released
antioxidant, an effective scavenger of free radicals and
hydroxyl groups, with beneficial effects on the skin.
It provides the softness, strength, and cushioning from
its use of ALPS® EasyGel, relieving the residual limb
from the stress created by vertical and shear forces.
It delicately conforms to the shape of the residual limb
without restricting blood flow. It can be easily donned
even by geriatric patients and users with reduced
manual dexterity.

The Stand for Deep Drawing Frame Type A (Article Number 07-134) enables the safe use of blister forming deep drawing frames without their own legs, e.g., Article 07-132. The width is individually adjustable, ensuring flexible adaptation to various oven models.
Dimensions: 400 x 300 x 250 mm
Inner diameter: 300 – 550 mm

Function and benefits
The Transfemoral Alignment Kit, Child, Connector for Adult Foot is part of the Rehab'Impulse alignment system that permits prosthetic fitting for various levels of amputation for the lower extremities. The connector for adult foot offers the possibility to connect a children size knee joint to an adult foot SACH 2.0.

Compatibility
The components included in the set are compatible with the Rehab'Impulse children knee joints and adult prosthetic feet.

Ideal for mobile workshops and small spaces, this compact jointer-planer delivers high precision for edging and surface planing of solid wood.
Key Features
Compact design, perfect for mobile use
90° jointing and up to 2 mm planing depth
Automatic feed for smooth operation
Precision-machined aluminium tables
2-knife HSS cutter block – 8500 rpm
Easy-change 80 mm dust extraction hood
Powerful 230 V – 1.5 kW motor
Main Specifications
Planing width: 254 mm
Table length: 1050 mm (jointing) / 450 mm (thicknessing)
Thickness height: 6–160 mm
Feed rate: 7 m/min
Weight: 40 kg

Workbench in sturdy steel construction with frame of rectangular hollow section. Drawer cabinet can be locked centrally with cylinder lock.100% full extension drawers with differential runners and 75 kg load capacity. Feet with plastic pads, do not damage the floor.
Drawer bodies always RAL 7035 light grey, powder coated. Variable colours for the drawer fronts. No surrounding ledges, thereby allowing optimum cleaning and full availability of the area for drawer dividers (boxes, rigid foam inlays, slotted partitions). Drawer runner mountings at 25 mm intervals.
Locking system with 5-pin cylinder locks and modular barrels. Compatible with integrated locking systems.
Body with cupboard and one inserted shelf.
Fitted with:
Door height (left) mm: 525
Number of height-adjustable shelves (left): 1
Drawer front height (right) mm: 75, 100, 150, 200
Optional extras:
Additional accessories such as manual height adjustment, wheels, side panels, etc. can be found under GridLine individual components in Group 92.
Colour:
Cabinet body and drawer body RAL 7035 light grey, drawer fronts and cupboard doors RAL 7016 anthracite, powder-coated. Drawer body not configurable, always RAL 7035 light grey.
Warning:
Intended use
Use exclusively approved Hoffmann Group accessories for modification or rebuilding.
For work in indoor industrial environments. For use on dry solid floors.
Drawers for storage of tools.
Storage shelf for storage of workpieces and tools.

Version:
Worktop 40 mm thick, non-warping beech marine ply, finished with clear UV varnish.
Frame - welded sheet metal.
Drawers of sheet metal with low-friction rollers of Delrin.
Sheet metal doors with plastic grips, opening angle 180° and self-closing hinges.
Central cylinder lock with 2 keys.
Fitted with:
Drawer front height (centre): 180; 180; 180
Door height (left) mm: 540
Door height (right): 540
Optional extras:
For suitable storage shelf see No. 929581.
Colour:
Body RAL 7035 light grey, fronts anthracite RAL 7016, powder-coated, internal shelves and storage shelves on top galvanized.
Note:
Other colours available for fronts: RAL 7035 light grey, RAL 5005 signal blue. No special paint finishes available.
Warning:
Intended use
Use the workbench only when in good technical condition. If any faults occur which may affect safety, rectify them without delay.
Only mount components in the holes provided for this purpose.
Use exclusively approved Hoffmann Group accessories for modification or rebuilding.
For work in indoor industrial environments. For use on dry solid floors.
Operate only in a dry environment.

Tubular steel frame with anti-slip, oil-resistant glides. Seat height adjustable by locking lever. Seat made of integral foam. Adjustable seat angle and pivotable to either side with automatic return adjustment.
Mechanical height adjustment of the seat.

The Circleg Dynamic Foot is designed for both active
and less active users, offering stability, comfort, and
energy return. Its adjustable design covers a wide range
of foot sizes and user weights. Made from lightweight
yet durable glass fiber and high-performance plastics, it
ensures a smooth roll-over and natural feel. The universal
cover protects against moisture and dirt while seamlessly
adapting to left or right orientation. Available in S, M, & L.

Activity Level: K1, K2, K3
Connection: Pyramid adapter
Side: Left & right
Size S (cm): 21 - 24
Size M (cm): 24 - 27
Size L (cm): 27 - 30
Maximal Body Weight S Foot: P3 - 70kg
Maximal Body Weight M Foot: P4 - 90kg
Maximal Body Weight L Foot: P5 - 110kg
Component Height (mm): 200
Component Weight (g): S: 915 M: 1030 L: 1125
Amputation Level: Tranfermoral & Transtibial

The Circleg Polycentric Knee’s unique design provides
the high stability required by low-mobility users and
meets the demands of active users. It provides a high
level of stability at heel strike and additional ground
clearance during the swing phase. It includes an
extension assist spring and a flexion damper to optimize
energy consumption and gait cycle. The knee allows for
flexion of up to 150°. The mechanism is protected from
dust and dirt by a knee cap, which also creates an
aesthetic natural shape when in a sitting position.

Activity Level: K1, K2, K3
Distal Connection: Pyramid adapter
Proximal Connection: Pyramid adapter
Maximal Body Weight L Foot: P5 - 110kg
Component Height (mm): 150
Component Weight (g): 870
Amputation Level: Tranfermoral

The Pylon Kit includes an aluminium pylon and two stainless steel female pyramid adapters; one fixed and one clamped. The overall maximum length is 250mm and the pylon can be cut to accommodate the different needs of the users. It is laid out for a maximal body weight of 110kg.

Activity Level: K1, K2, K3
Distal Connection: Pyramid adapter
Proximal Connection: Pyramid clamp adapter
Maximal Body Weight (kg): P5 – 110kg
Length (mm): 250 (adjustable)
Diameter (mm): 30
Amputation Level: Transfemoral & transtibial

The Circleg Cosmetic Covers are designed for trans-femoral & transtibial amputees and gives the Circleg it’s unique look. The cover provides a natural leg shape and maximum protection for your prosthesis. The lightweight material can be adjusted in length and shape to suit the individual user. The cover serves as an ideal base for customized leather or textile wrappings. The simple clamp system allows for quick fitting, reducing the cosmetic finish time.

TF S/M
Component Length (mm): 250 – 310
Component Weight (g): 129
Body Height (cm): 150 – 170

TF M/L
Component Length (mm): 310 – 370
Component Weight (g): 151
Body Height (cm): 170 – 190

TT
Component Length (mm): 250 – 310
Component Weight (g): 127
Body Height (cm): 150 – 190
Amputation Level: Transfemoral & transtibial

Safe working load and lifting capacity of 225 kg (495 lb)
150 mm central locking castors with steering system
Tilts from 0˚ to +90˚ in 15 seconds with dual-speed motors
Emergency lowering function allows manual control/safe lowering to immediately return the patient to a horizontal position
Harness set, handles, and worktable included as standard
Electric height and tilt adjustment via digital display handset, with live feedback of height in centimeters and tilt angle in degrees
Memory function with 3 programmable positions
Dual boards with adjustable angle from +15˚ to -30˚ (4 positions)
Height range from 47 cm to 101 cm
Lowers to wheelchair height to facilitate patient transfer
Tilt angle inclinometer installed as standard
Full-length accessory mounting rail for optional lateral supports
Specially designed precision bearings on all pivot points
Underframe clearance for mobile hoist
Choice of Standard or optional Standard+ upholstery colors

This versatile prosthetic liner provides a simple and effective solution
for everyday use. Designed for durability and cushioning, it ensures
comfort and support. It is an ideal choice for those seeking an essential,
reliable, and durable option.