Carbon Foot is intended for patients with M1–M3 activity
level unilateral or bilateral transfemoral amputation at all
levels or transtibial amputation on the boundary of the
upper, medium and lower-third of it, can be used in prostheses
after the disarticulation of the knee or hip joint.
The foot is produced in right and left versions in 5 categories
of stiffness that are selected depending on the
patient’s weight from 55 kg to 125 kg.
FEATURES:
- Adaptation of the hydraulic system of the prosthesis
to the surface while walking.
- Independent plantar (PF) and dorsiflexion (DF) adjustment.
- Hydraulic system lock for use at low and negative
ambient temperatures, for ease of driving a bicycle,
motorcycle, car, and changing the heel height of the
the foot.
- Accamulation and return of energy by elastic elements
of the foot.
- Response proportional to the patient weight and activity
level.
- Reliance on the entire surface of the foot.
- Soft contact with the surface when stepping on the
heel and smooth rollover.

Acrylic resin is very fluid, allowing, in combination with COPACRYL Jersey or COPACRYL Carbon resins, to add flexibility to composite parts.

The Soft resin cannot be used alone and must be incorporated into the Jersey or Carbon resin at a ratio of 10 to 30% to add flexibility to the fabricated device.

The polymerization of this resin occurs at room temperature by adding our SIPACRYL powder hardener, at a maximum ratio of 2% to 3% by weight compared to the amount of resin.

Combining COPACRYL Soft resin with Jersey or Carbon resins yields composite parts with the following characteristics:

Excellent mechanical properties
Very good skin tolerance
Ability to be thermoformed after curing (within the elasticity limits of the reinforcement fabrics used)
Can also be used with our natural reinforcements ORTHOFLAX®, ECO-BLACK, and HYBRIDS.

1H10Y — foot with carbon keel and hydraulic ankle
providing smooth and simple adjustment of heel height
in wide range.
The foot is intended for the patients with different activity
levels, unilateral or bilateral trans-femoral amputation at
all levels or trans-tibial users; it can be used in prostheses
after the disarticulation of knee or hip joint.
The carbon foot with the medium and high degree
of energy saving is intended for the amputees from 50 kg
to 125 kg.
1H10Y foot is available in 5 categories of stiffness
depending on the patient weight.
The foot has the improved quality of damping in the phase
of front push, easy and smooth rollover. Energy response
grows with an increase of walking speed due to nonlinear
increase in stiffness of carbon fiber element.
Design of the front elastic element provides the increased
stability in stance phase and energy response in the
phase of rear shock. The foot is produced in right and left
versions.
Activity level: M1, M2, M3,
Maximum patient weight: 125kg
Build height: 115mm

Carbon Foot is intended for patients with M1–M3 activity
level unilateral or bilateral transfemoral amputation at all
levels or transtibial amputation on the boundary of the
upper, medium and lower-third of it, can be used in prostheses
after the disarticulation of the knee or hip joint.
The foot is produced in right and left versions in 7 categories
of stiffness that are selected depending on the
patient’s weight from 45 kg to 125 kg.
Carbon Foot has the improved quality of damping in the
phase of front push, easy and smooth rollover.
Application of the front elastic element with nonlinear
stiffness characteristics provides a return of energy proportional
to the walking pace.
Design of the front elastic element provides the increased
stability in stance phase and energy return in the phase
of rear shock.
The cosmetic footshell of 1H21Y foot has a slim design
and will be convenient for women’s shoes. The cosmetic
footshell of 1H20Y foot has a standard design.

Excellent for strength and lighter weight lay-ups, one of the strongest and stiffest reinforcements available
- 12K Tow
- 45 degree angle braid
- Rigid reinforcement

PR01.K3 is a flexible and light carbon foot, specially designed for patients with a lower extremity Syme's amputation. The upper part of the foot features a carbon-fiber plate whereas the toes are composed of two carbon sheets. The foot is suitable with a steel rotating lamination anchor.
Include:
- Carbon Foot shell (in beige, dark brown and very dark brown color)
- Carbon Foot Stocking

Mobility degree: 3-4
Include:
- Carbon Foot shell (in beige, dark brown and very dark brown color)
- Carbon Foot Stocking

Syme Plus' static alignment properties and 10° internal and external rotation features makes it recommendable to Syme's amputees.
Mobility degree: 1-2, Heel height: 10mm, Max. load 80kg, Material: Carbon Fiber
Include:
- Carbon Foot shell (in beige, dark brown and very dark brown color)
- Carbon Foot Stocking

CHOPART PLUS is recommendable in Chopart's amputations. Its rotation feature makes the apllications more easy for the technicians.
Include:
- Carbon Foot shell (in beige, dark brown and very dark brown color)
- Carbon Foot Stocking

for: 758F200/758F220 Safety storage cabinet
Version: According to directive 2006/95/EC (Low Voltage Directive), directive 2004/108/EC (EMC Directive), directive 94/9/EC (ATEX) labelling: EX II 3/- G Ex ic nA IIB T4 Gc
Equipment: 760E14 Active carbon filter for filtering solvent vapours (hydrocarbons), filtration up to 99.99% under normal operating conditions, VDE* tested filter monitoring, VDE* tested exhaust monitoring, connection cable, mains plug *VDE: Association for Electrical, Electronic and Information Technologies
Dimensions WxDxH: 305 x 555 x 210 mm
Volume flow: 25 m /h
Material: Powder-coated thin steel sheet
Speed: 2.450 min-1
Sound intensity level: 39 dB(A)
Electrical connection in V/Hz/kW: 1 x 230 N/PE / 50-60 / 0.03
Weight: 17 kg
Colour: Light grey (RAL 7035)
To be used for: Ventilating security storage cabinets without additional exhaust ducts
Current draw: 0.13 A
Consumables: 760E14 Active carbon filter
Optional accessories: To be installed on 758F200 or 758F220 Security storage cabinet (760E13 adapter for air circulation filter needed)

These sealants replace hemp, sealing tapes, and pastes, they are resistant to gases, liquids, air, water, oils, hydrocarbons and many chemical products. Complete surface contact ensures a 100% seal. Unscrewing, or correction of position during assembly can be performed using conventional tools at any time before the sealant hardens. No sealant residues to block filters and valves.
The stick with pasty sealant is economical in consumption, no drips after use.
Application:
Improved bonding of suckers.
Note:
Before applying sealant, clean the threads with general-purpose cleaner
Labelling of hazardous substances: GHS07 Caution
Content of stick: 19 g
Colour of sealant: orange
minimum break-away torque: 5.8 N·m
Temperature range: -55 °C - 150 °C
for thread size M to: M80
for imperial thread size: 3 inch
Strength for disassembly: low
fluorescent:no

200gr/m2, 2x2 twill
Carbon fibers are very strong · Light weight · Reduced elongation at break · Very resistant to temperature variations. This fabric is much stronger than most metals or other fiberglass reinforced materials. This fabric is elastic, very resistant and attenuates vibrations. · The material to the aeronautical standard makes it possible to manufacture fine agglomerates but with high resistance.

The carbon foot is intended for the patients with M2 — M4
activity levels (excepting sportive loads), unilateral or bilateral
trans-femoral amputation at all levels or trans-tibial
users on the line of the upper and middle third; it can be
used in prostheses after the disarticulation of knee or hip
joint.
The foot is available in left and right design and in
8 categories of stiffness suitable for the patients from
45 kg to 130 kg depending on the patient’s activity level.
The carbon foot consists of extended carbon fiber toe and
heel blades with nonlinear stiffness characteristics, which
provide energy return proportional to the pace of the walk,
easy and smooth rollover.
The foot incorporates an innovative one-piece elastic
connection of the toe element and the adapter that allows
for a low building height of the foot and a high degree of
energy efficiency when walking.
Technical solutions applied in the design of 1H15Y feet
aimed at ensuring high safety level, significant load reduction
on the spine and sound limb, providing a natural gait.
Activity level: M2, M3, M4
Maximum patient weight: 45-130kg

Carbon Foot is intended for patients with M1–M3 activity
level unilateral or bilateral transfemoral amputation at all
levels or transtibial amputation on the boundary of the
upper, medium and lower-third of it, can be used in prostheses
after the disarticulation of the knee or hip joint.
The foot is produced in right and left versions in 7 categories
of stiffness that are selected depending on the
patient’s weight from 45 kg to 125 kg.
Carbon Foot has the improved quality of damping in the
phase of front push, easy and smooth rollover.
Application of the front elastic element with nonlinear
stiffness characteristics provides a return of energy proportional
to the walking pace.
Design of the front elastic element provides the increased
stability in stance phase and energy return in the phase
of rear shock.
The cosmetic footshell of 1H21Y foot has a slim design
and will be convenient for women’s shoes. The cosmetic
footshell of 1H20Y foot has a standard design.

Max. 20 degrees adjustable lamination
Spring loaded mechanism
Light-weight construction
Pre-bent lamination plate

Material: Carbon fiber
System height: 250mm
System weight: 600g
Maximum flexion angle: 115°
Maximum body weight: 100kg
Modular connector options: D-TLP-AAH, D-TLP-SAH

30mm diameter graphite tube which is used
for connection and can easily be cut to required
length.

Used for ankle-socket or knee-socket
connection when no alignment is needed.

V One knee is controlled by a microprocessor and sensors. In the auto-mode, the flexion resistances of the knee joint will be adjusted automatically depend on user's walking speed and gait patterns. In the manual-mode, manual set for the flexion resistances is also available.

Safety and intelligence
A new gravity sensor is integrated to estimate different walking speeds, and the knee prosthesis resistance can be changed for more natural gait and safety.

Walking resistances setting
The resistances of the knee joint for three walking conditions (slow, natural, fast walking) are set by the PC program in the auto-mode.

Four-bar mechanical design
The trajectory of the instance center of rotation (ICR) mimics anatomic pattern, which ensures stability in the stance phase and toe clearance in the swing phase.

Carbon frame
It makes knee lighter and more durable.

- Three kinds of hardness Rubber Design (60, 70, 80) replaceable for user.
- The Split toe allows the foot to adjust to uneven ground.
- Stores and releases energy through its full length.
- Smoother roll over to toe.
Material: Aluminum alloy,Stainless steel seat,Carbon fiber,Synthetic fiber
Heel height with(mm): 10
Maximum load: 100 kg (size22-23), 125 kg (size24-28)

- Excellent elasticity of carbon foot provides the flexibility and comfort when walking.
- With graphite multi-axis ankle joint, it provides a better proprioception when walking on the uneven surfaces.
Material: Carbon fiber, PU, Aluminum, Rubber
Heel height with(mm): 10
Maximum load: 100 kg (size22-23), 125 kg (size24-28)

High quality branded alkaline manganese batteries last 2-3 times longer and can be stored twice as long as zinc and carbon batteries.
HOLEX batteries provide long-lasting and reliable power.
Number of batteries included: 4
Chemical composition: Alkaline-manganese
Battery designation: Micro, AAA
International format: LR3
Rated voltage: 1.5V
rechargeable: no

Casings and doors made of 0.9 mm sheet steel, shelving possible in 40 mm steps. Doors reinforced internally and lockable by a sliding handle with cylinder lock.
With hinged doors with viewing window (polycarbonate lenses).
Permissible shelf load / Maximum load per rack distributed over the surface (on the metal): 60 kg
Allowable load internal cabinet body: 500 kg
Door opening angle: 225 degree
Height: 2000 mm
Width: 1000 mm
Depth: 400mm
Useful height: 1,840 mm
Number of shelves: 4

Housing for drawers, shelves, etc. possible in steps of 20 mm. The base and upper cabinets are provided with corresponding perforations for screwing together, equipment with castors (height 1200 mm max.) Or wall mounting.
Doors with safety edges, reinforced and rigid, hinged or sliding door available, solid sheet model or with polycarbonate manhole. The cabinet without doors can also be used as open shelving.
Cylinder locks with 2 keys each integrated in the sliding handle. On request, possibility of delivery of locks for installations with security card at an additional cost.
Colors: As standard, body in light gray RAL 7035, doors and drawers in signal blue RAL 5005, powder-coated.
Cabinets fitted directly or subsequently with drawers must be anchored to the floor or to the wall to avoid any risk of tipping and may under no circumstances be subsequently fitted with casters.
In the case of specific equipment, make sure that the sum of the mounting heights does not exceed the useful height of the cabinet.
Shelves and accessories for combinable cabinets, see art codes. 957000 - 957100.
Installation of drawers in the upper part of the cabinet for base cabinets and in the lower part of the cabinet for upper cabinets.
Material thickness: 0.9mm
Permissible load of drawers / extendable shelves: 60 kg
Permissible shelf load / Maximum load per rack distributed over the surface (on the metal): 100 kg
Allowable load internal cabinet body: 1000 kg
Drawer extraction (partial / total): 100%
Door opening angle: 225 degree
Height adjustment in steps: 20 mm
Cylinder lock: Modular cylinder
Available colors: RAL 9002, 7035, 7005, 7016, 6011, 5018, 5012, 5011, 5005, 3003
Safety certificate: GS TÜV Süd
Height: 800 mm
Width: 500mm
Depth: 550 mm
Useful height: 640 mm
Weight: 30 kg

Upper: Airy velvet crust
Sole: Dual density polyurethane
Toe cap: Steel, 200 Joules
Anti-perforation: Soft steel
Insole: Carbon felt
Weight: 600g
EU: 35-48 UK: 2.5-13

Clear view visor of polycarbonate.
Thickness 1.0 mm, flat flexible screen.

Lara Carbon Foot is especially recommended for above, below-knee and hip amputation patients who are very active and under 125 kgs.
Due to its design, LARA offers many advantages for daily use for users with Mobility degrees 3 and 4.
Nothing stands in the way of sporting activities such as tennis, which subjects the user to greater impact stress. The LARA also allows for comfortable and energy-saving walking during the daily challenges at work and at home.
LARA’s innovative heel design enables users to perform daily activities with less energy consumption by storing the energy expended during activities and this reduces foot fatigue compared with conventional designs.

Due to its design, Lara offers many advantages for daily use for users with Mobility degrees 3 and 4.
Nothing stands in the way of sporting activities such as tennis, which subjects the user to greater impact stress. The Lara also allows for comfortable and energy-saving walking during the daily challenges at work and at home.

Lara’s innovative heel design enables users to perform daily activities with less energy consumption by storing the energy expended during activities and this reduces foot fatigue compared with conventional designs.

Chopart Carbon Foot is a category of flexible and light carbon prosthetic feet. Its divided carbon spring design provides excellent stability and safe ground contact. Recommended for prosthetic users with mobility grade 1 and 2.

1000x1600mm

- Ideal for sawing steel, aluminum, copper, PVC and Teflon
- Stepless, electronic speed control from 30 - 80 m / min
- Particularly quiet - up to 60% quieter than comparable band saws
- Low vibration and wear thanks to special gearbox with two large gears made of hardened steel
- Guaranteed cutting accuracy of max. 0.3 mm course over 100 mm cutting length
- Each machine individually tested for precision in Italy
- Low-speed DC drive motor with carbon brushes for up to 10 times longer life
- Electronic temperature and ampere recording monitoring against overload
- Cast strip wheels with ground running surface without rubber pads, therefore suitable for dry and wet cutting
- Massive saw bar made of die-cast aluminum (readjustable from MBS 125) and with sturdy transport lock
- Two movable, adjustable saw band guides with chip scraper made of metal
- Particularly stable base plate with non-slip feet
- Very service-friendly, as components are easily accessible

also referenced under: MBS 105, CRM 116

also referenced under: OOMAOWELAIRTC CRM 2.1, 100.645

- 100% Swiss made quality
- 60 years of expertise in making hot-air tools – brought together in the new SOLANO AT
- The sturdy, professional hot-air tool that weighs less than 1 kg/2.18 lbs
- Functional design: two-component handle grip and optimum center of gravity ensure ergonomic working
- Quick clean air filters
- Automatic carbon stop (collector protection) and heating element protection
Voltage V ~: 230
Power W: 2300
Temperature ° C: 500–650
Air quantity (20 ° C) l / min: 240
Dimensions (L × ∅) mm: 270 x 270 x 75 (45)
Weight: 750gr

The TRIAC ST from Leister is a handy heat gun, primarily used as a profiling tool for welding and processing plastic membranes. Additionally, it is used for professional welding, shrinking and molding various thermoplastics. The two-sided air filters of the TRIAC ST can be easily removed and cleaned. This ensures an optimal air supply and maximum performance. As a successor of the TRIAC S, the ST combines a new, highly robust engine with current technology and modern design in a handy heat gun.

Compared to the design of other heat guns, the proven bar-style heat gun enables welding above the head, on the floor and in narrow areas. The ergonomic, two-component handle and its optimized center of gravity provide an ideal grip, even for longer periods of use and under difficult conditions. When in use, the actively cooled, protective tube ensures continuous safety by protecting against burns. The carbon brake also protects the heat gun from overloading. The extensive range of accessories with over 80 attachment nozzles practically make this heat gun a universal device. The TRIAC ST is already the seventh generation of Leister’s revolutionary line of TRIAC hot air tools. Decades of experience packaged in a modern design, manufactured with Swiss quality: The TRIAC ST is a robust and reliable tool.

VOLTAGE: 100 - 230 V
FREQUENCY: 60 Hz; 50/60 Hz
POWER: 1500 - 1600 W
TEMPERATURE: 40 - 700 °C
AIR FLOW (20°C): 240 l/min
TEMPERATURE SETTING STEPLESS: Yes
STATIC PRESSURE: 3000 Pa
NOISE EMISSION LEVEL: 67 dB (A)
OUTDOOR USE: Yes
DISPLAY: No
ECO MODE: No
E-DRIVE: No
NOZZLE CONNECTION Ø: 31.5 mm / 1.25 in; M14
LENGTH: 338.0 mm
DEVICE DIAMETER: 90 mm
HANDLE DIAMETER: 56 mm
WEIGHT: 0.99 kg
PLUG: KR, 2 poles, 16A; CN, 2 poles, 10A; EU, 2 poles, 16A; JP, 3 poles, 20A; CEE yellow, 3 poles, 16A; JP, 2 poles, 15A; AU, 3 poles, 10A; UK, 3 poles, 13A; US, 2 poles, 15A, polarized; CH T11, 2 poles, 10A
POWER CABLE LENGTH: 3.0 m
CONFORMITY MARK: CE
SAFETY MARK: KCC; S+; UL
PROTECTION CLASS: II

also referenced under: OOMAOWELAIRT, CRM 1, 141.311

- Designed for demanding continuous use when oil-free and clean compressed air is required
- Air is blown through the cooling chambers of the cylinder by means of a fan; thus optimum cooling is achieved
- Large piston, movably mounted, resulting in 60% more power compared to tilt piston systems
- Cylinder running surfaces with high-precision and micro-smooth surface for minimum friction
- The high-performance piston or piston ring made of a graphite-Teflon-carbon special compound has a much longer service life than a simple piston ring made of Teflon
High-quality maximum equipment
- Filter pressure regulator for stepless adjustment of the working pressure, with simultaneous dirt, oil and condensate separation
- One compressed air outlet each for filtered compressed air, filtered and oiled compressed air and a direct outlet on the compressed air tank
- Two comfort safety quick couplings
- High-quality CONDOR pressure switch
- One pressure gauge each for container and working pressure
- Simple condensate drain via ball valve
Compressed air lines and reservoirs with long service life
- Flexible armored hose line with heat protection prevents vibration fractures
- Inside and outside hot-dip galvanized, corrosion-protected compressed air tank with 15-year guarantee against rusting through
Comfort safety quick couplings
- One-hand safety couplings according to DIN EN 983 used as standard by AIRCRAFT as first manufacturer
- Two separate locking systems for maximum working safety
- No whipping of the hose line during uncoupling
Convenient transport
- Transport back-friendly in upright position and without lifting
- Additional transport handle directly on the container
- Puncture-proof PU foam wheels
- Stable steering chassis with parking brake
TÜV-free
- Type-tested by an approved monitoring body
- Recurring container inspections also possible by a competent person
Immediately ready for use
- Fully automatic on-off operation
- With all safety devices
- Completely ready for connection

also referenced under: AIRPROFI 440/100 OF PRO, EMACAIRCO380, CRM 178

- Designed for demanding continuous use when oil-free and clean compressed air is required
- Air is blown through the cooling chambers of the cylinder by means of a fan; thus optimum cooling is achieved
- Large piston, movably mounted, resulting in 60% more power compared to tilt piston systems
- Cylinder running surfaces with high-precision and micro-smooth surface for minimum friction
- The high-performance piston or piston ring made of a graphite-Teflon-carbon special compound has a much longer service life than a simple piston ring made of Teflon
High-quality maximum equipment
- Filter pressure regulator for stepless adjustment of the working pressure, with simultaneous separation of dirt, oil and condensate
- One compressed air outlet each for filtered compressed air, filtered and oiled compressed air and a direct outlet on the compressed air tank
- Two comfort safety quick couplings
- High-quality CONDOR pressure switch
- One pressure gauge each for tank and working pressure
- Simple condensate drain via ball valve
Compressed air lines and reservoirs with long service life
- Flexible armored hose line with heat protection prevents vibration fractures
- Inside and outside hot-dip galvanized, corrosion-protected compressed air reservoir with 15-year warranty against rusting through
Comfort safety quick couplings
- One-hand safety couplings according to DIN EN 983 used by AIRCRAFT as the first manufacturer in series production
- Two separate locking systems for maximum working safety
- No whipping of the hose line during uncoupling
Convenient transport
- Transport back-friendly in upright position and without lifting
- Additional transport handle directly on the container
- Puncture-proof PU foam wheels
- Stable steering chassis with parking brake
Immediately ready for use
- Fully automatic on-off operation
- With all safety devices
- Completely ready for connection

also referenced under: AIRPROFI 220/50 OF PRO, CRM 178.3