Tubular steel frame, with aluminum components and zinc plated steel fasteners
Rigid frame
A single medium size rubber castor wheel at the front and a long wheelbase to help the user to propel safely over uneven and inclined ground
Posturally supportive padded fabric backrest, with tensional adjustable straps
Adjustable backrest height
Adjustable footrest height, depth, and angle
Adjustable seat depth
Ergonomically positioned and height adjustable push handles with non-PVC grips
Includes curved armrests
Includes one calf strap
Pelvic strap included
Anti-tip wheel
Pneumatic, medium tread tires
Chromium plated steel pushrims
Quick release axles
Water resistant and fire retardant nylon fabric upholstery
Includes a contoured pressure relief cushion with a water-resistant, size adjustable cover
Easily collapsible for transport: the rear wheels can be removed, and the push handles can be lowered, without requiring tools
Reflective stickers in the front and back of the wheelchair
Certifications: ISO: 7176, including fire retardant foam and fabric; ISO 14001 (2018-2021); OHS180001 (2018-2021); and ISO 13845 (2019- 2022)

Can be configured to be used in both the posterior and anterior position
Customizable to the user’s preferred height
Lightweight and sturdy aluminum frame
Foldable
Two 3″ (7.6 cm) front wheels and two 3″ (7.6 cm) universal wheels
Front wheels are single direcion front and back only
Front wheels lock
PU handles
Color: Silver and yellow with blue grips
Cetificatitons: ISO 13485, ISO 9001, CE mark
Package information: 21.7″ x 5.9″ x 24″ (55 x 15 x 61 cm); 1 unit per carton

S - 42-51.5cm / max. 1m
M - 52.5-62.5cm / max. 1.2m

an essential accessory for walking rehabilitation, very stable, light to move and easy to use

with foldaway seat
two wheels
handgrips with adjustable height from 71,5 to 91,5 cm
height seat: 62 cm

Strong pressed steel shanks with rotating wheel and lock. With 6 different hollow punches (2.0; 2.5; 3.0; 3.5; 4.0 and 4.5 mm ⌀).
70% less force required due to efficient leverage. Ergonomically shaped plastic grips.
For soft materials such as leather use an underlay to avoid damage when a lot of pressure is applied.
overall length: 250 mm

BRAND: ORTHOPUS
This kit includes:
- 5 rubber bands to vary the grip strength
- a washer to block the rotation of the hook on a wrist nut
- one pair of black silicone grips

upholstered
suitable for gymnasiums
two handgrips for hanging
one side covered with slip proof material - smooth on the other side
dimensions: 200 x 100 x 4 cm

• Arthritis friendly loop brakes and handgrips.
• Multiple storage spaces
• Parking brakes
• Foldable for easy storage
• Light aluminium frame
• Large padded PU seat
• Safety padded backrest
• Safety handles adjustment
• PU wheels
• Suitable for indoor and outdoor use.
eight: 78/93cm
Max.weight user: 130kg

Motor driven leg and arm trainer. For passive training, specific for home care. Promotes blood circulation, increases strength and flexibility of muscles. Can be used for rehabilitation as well as for fitness.
Features
- lightweight compact design
- adjustable speed
- multifunctional LCD display readout scan, time, count + total count revolutions and calories
- 15 minute timer switch
- carrying handle for easy transport
- non-skid mat
- hand held control console
- foot pedals and handgrips

BRAND: ORTHOPUS
Material: reinforced aluminum
Thread: M10
Weight: 112g
Length: 145mm
Made in France
Easy to use and strong, this cable-operated work hook allows to grab a multitude of
objects. Its serrated ends make it easy to grip thin or small items and its robustness is
ideal to carry out heavy loads or to do intense manual works.
Comes with a set of 5 rubber bands to vary the grip strength + one pair of black silicone
grips.
74-01858
74-01059

The parts in this kit are specifically designed for the Liberty II wheelchair and are not guaranteed to function on other wheelchairs.

2 complete hardware sets for the frame
2 complete hardware sets for the seat unit
2 headrest pads with cover
1 small backrest cushion cover
1 medium backrest cushion cover
1 large backrest cushion cover
1 small seat cushion cover
1 medium seat cushion cover
1 large seat cushion cover
4 abductor pads with cover
4 lateral support pads with cover
4 lateral support covers
3 pelvic straps (without metal flat mount)
1 small chest harness (without metal flat mount)
1 medium chest harness (without metal flat mount)
1 large chest harness (without metal flat mount)
2 hand grips
4 m Loop Velcro strip (5 cm width with sticky tape)
4 seat pan clamps
2 400 mm x 360 mm x 20 mm firm foam inserts (for pre-seat bone shelf)
2 calf straps
4 quick-release axles
20 bearings (6202)
1 wheel-lock assembly (1 left hand / 1 right hand)
4 rear wheel bearing covers
20 small plastic caps for 19 mm tubes (armrest)
20 small plastic caps for 22 mm tubes (frame tube)
20 small plastic caps for 15 mm tubes (rear wheel axle)
20 small plastic caps for 38 mm tubes (caster)
20 small plastic caps for 16 mm square tubes (headrest)
30 plastic mounting screws for spoke covers
Certification: ISO 13485

The Roeder skill test measures, using different movements and grips, the speed at which small objects can be manipulated.
This Roeder skill test is used in professional testing.

The stopwatch is not included with the test but is very useful for performing the test correctly. The stopwatch is available separately.

The Roeder skill test documents are provided in English. Other languages are available upon request.

4 compartments are used to store (washers, rods, caps, and nuts).

Objectives:

Measures the speed and dexterity of arm, hand, and finger movements.
Can be used to assess job aptitude.

1 square board ≈ 50 cm
20 tubes Ø 25 mm (2 colors, height 10 cm)
10 tubes Ø 20 mm (transparent, height 12 cm)
8 square sticks 10 mm² (1 color, height 14 cm)
Objectives:

Working on inclusion solutions
Progressive finger wrapping work
Various grips
Bi-manual coordination
Usage:
Place the tubes and sticks in the appropriate slots. Insert the elements into each other using the different diameters, aiming to create as many combinations and nestings as possible. Another interesting exercise is to reverse the process, dismantling the combinations and returning the elements to their original places.

1 square board ≈ 50 cm
4 sticks Ø 4 mm (1 color, height 12 cm)
6 square sticks 10 mm² (1 color, height 14 cm)
8 tubes Ø 16 mm (transparent, height 11 cm)
4 square tubes 20 mm² (white, height 8 cm)
2 tubes Ø 30 mm² (translucent, height 8 cm)
10 tubes Ø 25 mm² (colored, height 5 cm, 10 cm, and 12 cm)
2 tubes Ø 40 mm² (transparent, height 5 cm)
Objectives:

Working on inclusion solutions
Progressive finger wrapping
Various grips
Bi-manual coordination
Usage:
Place the tubes and sticks in the appropriate slots. Insert the elements into each other using the different diameters, aiming to create as many combinations and nestings as possible. Another interesting exercise is to reverse the process, dismantling the combinations and returning the elements to their original places.