This water-based vacuum pump is specifically designed to meet the needs of orthopedic centers operating in resource-limited environments. Thanks to its water-operated vacuum system, it ensures exceptional durability and maintenance-free operation, reducing operating costs and downtime.

Technical Features:
✔ Power: 750W – Operates on 220V
✔ Vacuum Pressure: -0.85 to -0.1 mbar
✔ High-Quality Motor: Grundfos, known for its reliability and energy efficiency
✔ Includes connection kit for quick installation
✔ Supplied with 2 vacuum wrapping tubes: Big & Medium, suitable for different molding sizes

Why Choose This Vacuum Pump?
🔹 Minimal Maintenance: Unlike traditional pumps that require frequent servicing, this model operates with a water system, minimizing wear and mechanical failures.
🔹 Ideal for Demanding Environments: Designed to be resistant to harsh conditions, making it perfect for orthopedic centers in rural and urban areas of low- and middle-income countries.
🔹 Optimized Performance: Its Grundfos motor delivers powerful and continuous suction, ensuring excellent molding quality and increased productivity.
🔹 Easy and Quick Installation: Delivered with a complete connection kit, it can be set up without additional equipment.

Applications:
✅ Orthopedic molding production
✅ Thermoforming of prosthetics and orthotics

Thanks to its robust design and maintenance-free system, this water-based vacuum pump is a long-term investment for orthopedic healthcare facilities, ensuring smooth production and reduced maintenance costs.

also referenced under: OOMAVAPUCR10, CRM 56, CR 1000

Powerful oven for larger molds
The latest member of our convection oven line provides a larger inside width as the models No.1 and
No.2. The powerful combination of heating and fan allows a short preheating period and guarantees
a perfect heat distribution. In addition to the timer control the oven can be turned on permanently.

Heating: 4000W, fan motor with reversing rotation direction, Heating active light
Thermostat: infinitely up to 290°C
Timer: infinitely 0 - 60 minutes and permanent on, On/Off active light
Housing: Stainless steel, inside and outside, door with large double pane viewing window, opens down to the front, double side bouncy supports, 25W illumination
Accessories: 3 trays standard
Power supply: 400 V / 50Hz / 4,4 kW
Dimensions: outside: W 860 x D 780 x H 580 mm / inside : W 600 x D 400 x H 360 mm
Weight: 40 kgs

- Modular design: 3 bars sizes (150, 180, 220 mm) & 7 shoe sizes to fit children 3 months – 5 years old.
- Easy to use: Shoes clip on and off the bar to make putting the brace on the child much easier.
- Comfortable: Soft canvas shoes are lined to prevent blisters. Pronounced internal heel cup and inspection hole helps ensure the foot is positioned correctly in the shoe.
- Washable: Shoes and bar can be hand washed.
- Durable: Bar and shoes can be reused if in good condition.
- Child friendly design: Many parents report that this colorful, plastic brace feels less stigmatizing than other models.
- Medically Compliant: Meets Ponseti Method and WHO Assistive Technology product specifications. Registered FDA and CE certified.
- Adjustable: Shoes can be set to 65˚ or 45˚ of abduction to accommodate bi- and unilateral cases.
- Manufacturing: Plastic parts are injection molded in the US. The shoes are made in China.

1000x1000x12mm
cell-polyethylene foam
Application:
-for padding of positioning splints and correctional braces (e.g. orthoses)
Characteristics:
-closed-celled expanded PE
-washable
-suitable for processing with Streifylen and Streifycolor
-molding temperature depending on heat source -approx.100-130 °C
-approx. 15-18 Shore A

ensures even vacuum distribution
does not bond to thermoplastic
ca. 10 m

4x1740x960mm
Polyethylene foam material, thermo-moldable at approx. 110-130°C, approx. 30° Shore A

Amputation: Below-knee (transtibial) amputees
Socket: Interim socket / Test socket
Remolds: 10 times
All-in-One: mounting plate attached
Offset: 1 cm
Suspension system: Passive vacuum (liner + sleeve) or Pin-Lock (Clutch)
Weight bearing: Total-Surface-Bearing (TSB)

1000x1000x4mm
cell-polyethylene foam
Application:
-for padding of positioning splints and correctional braces (e.g. orthoses)
Characteristics:
-closed-celled expanded PE
-washable
-suitable for processing with Streifylen and Streifycolor
-molding temperature depending on heat source -approx.100-130 °C
-approx. 15-18 Shore A

3x1740x960mm
Polyethylene foam material, thermo-moldable at approx. 110-130°C, approx. 30° Shore A

2x1740x960mm
Polyethylene foam material, thermo-moldable at approx. 110-130°C, approx. 30° Shore A

thermo-moldable at approx. 90 - 130°C., approx. 35° Shore A, 1030x1035x10mm

thermo-moldable at approx. 90 - 130°C., approx. 35° Shore A, 1030x1035x2mm

5x1100x1100mm
Polyethylene foam material, thermo-moldable at approx. 110-130°C, approx. 30° Shore A

6x1100x1100mm
Polyethylene foam material, thermo-moldable at approx. 110-130°C, approx. 30° Shore A

3x1000x1000mm
Polyethylene foam material, thermo-moldable at approx. 110-130°C, approx. 30° Shore A

6x2000x1000mm
Polypropylene copopolymer (PPC), Excellent thermoforming, Chemical and corrosion resistant, thermo-moldable at approx. 165°C, approx. 75° Shore D

Plastic acrylic resin (non-toxic), pigment dye. Clean tools with water. High hardness, low shrinkage. Protective varnish for the exterior. Practical working time 20 to 30 min. Setting time 45 to 60 min. Dosage 2 for 1, 100 g / 50 g, variable depending on the application. Consumption 200 to 300 ml per m². Realization of decorative or technical elements by molding, laminating or projection. Interior and exterior decor panel. Application in casting or in lamination with fabric + fiberglass reinforcement. Direct molding on polystyrene / bodywork. Clean use, non-toxic, durable over time, low water permeability. Supplied with: 1 Part B bottle.
Dry milk-white color.

6x2000x1000mm
Polypropylene homopolymer (PPH), Excellent thermoforming, Chemical and corrosion resistant, thermo-moldable at approx. 165°C, approx. 75° Shore D

5x2000x1000mm
Polypropylene homopolymer (PPH), Excellent thermoforming, Chemical and corrosion resistant, thermo-moldable at approx. 165°C, approx. 75° Shore D

4x2000x1000mm
Polypropylene homopolymer (PPH), Excellent thermoforming, Chemical and corrosion resistant, thermo-moldable at approx. 165°C, approx. 75° Shore D

3x2000x1000mm
Polypropylene homopolymer (PPH), Excellent thermoforming, Chemical and corrosion resistant, thermo-moldable at approx. 165°C, approx. 75° Shore D

Filter class FFP2, particularly suitable for harmful carcinogenic, radioactive substances (viruses, bacteria, fungal spores) and harmful, toxic particles (dust, smoke, aerosols)

Series of classic respiratory protection masks with foldable body. The robust headband and the flexible nose cover molded in the mask material allow an easy adaptation of the mask to each face morphology. With soft foam insert at the nose for optimal sealing. The powerful filter material provides optimal protection in addition to low respiratory resistance. Hygienic individual packaging.
With exhalation valve.

You can optimally lean against the fact that the inclination tension, which is easily adjustable with an Allen key, allows you to adapt the resistance to your movements and your weight.
The integrated lumbar support provides additional back support and comfort.
The adjustable height and the seat with a thick layer of cold-molded polyurethane foam provide a comfortable position.
This chair has been tested for home and office use and meets the requirements specified in standards EN 1022, EN 16139 and ANSI / BIFMA x5.1 in terms of safety, resistance and stability

Ideal for storing plaster molds and models
Allowable shelf load: 150 kg
Number of shelves: 5
Dimensions: 1060x536x2000mm
Total maximum load: 1300 kg

3x2000x1000mm
Polypropylene copopolymer (PPC), Excellent thermoforming, Chemical and corrosion resistant, thermo-moldable at approx. 165°C, approx. 75° Shore D

4x2000x1000mm
Polypropylene copopolymer (PPC), Excellent thermoforming, Chemical and corrosion resistant, thermo-moldable at approx. 165°C, approx. 75° Shore D

5x2000x1000mm
Polypropylene copopolymer (PPC), Excellent thermoforming, Chemical and corrosion resistant, thermo-moldable at approx. 165°C, approx. 75° Shore D

74-00873

14x400x400 mm, ethylene vinyl acetate (EVA), moldable approx. 130-135 ° C, suitable for flexible internal sockets, in particular for sockets above the knee

12x400x400mm, ethylene vinyl acetate (EVA), moldable at approx. 130-135 °C, suitable for flexible inner sockets, especially for above-knee sockets

9x400x400mm, ethylene vinyl acetate (EVA), moldable at approx. 130-135 °C, suitable for flexible inner sockets, especially for above-knee sockets

slide system for loading the mold inside the press before each injection

also referenced as: OOMAOPRECR75A, CRM72

This children's crutch mold is specifically designed for manufacturing ergonomic crutches adapted to young patients. With a length of 17 cm, it enables the production of crutches optimized for comfortable elbow support, promoting better posture and extended use without discomfort.

Key Features:
✔ Made of reinforced aluminum alloy, ensuring excellent thermal and mechanical resistance for precise and durable molding.
✔ Ergonomic design adapted to children's specific needs.
✔ Compatible with plastic injection machines, particularly for recycled polypropylene granules.
✔ High-quality material providing optimal durability and a smooth finish.
✔ Ideal for orthopedic centers and manufacturing workshops seeking to produce customized mobility solutions.

This mold is designed for use with hydraulic injection machines, enabling local production of orthopedic crutches made from recycled polypropylene, contributing to an eco-friendly approach and reducing the cost of medical equipment.

also referenced under: OOMAMOULEC17, CRM 80

This teen crutch mold is designed for manufacturing orthopedic crutches adapted for young adults and teenagers. With a length of 23 cm, it enables the production of crutches providing optimal ergonomic support at the elbow, ensuring enhanced comfort and stability during use.

Key Features:
✔ Made of reinforced aluminum alloy, ensuring excellent thermal and mechanical resistance for precise and durable molding.
✔ Ergonomic design suited for teenagers and young adults.
✔ Compatible with plastic injection machines, allowing the use of recycled polypropylene granules.
✔ High-quality material providing optimal durability and a smooth finish.
✔ Ideal for orthopedic centers and manufacturing workshops producing mobility aids tailored for this age group.

This mold is designed for use with hydraulic injection machines, enabling the local production of orthopedic crutches using recycled polypropylene, contributing to a sustainable approach and reducing medical equipment costs.

also referenced under: OOMAMOULEC23, CRM 81

This adult crutch mold is specifically designed for manufacturing orthopedic crutches adapted for adults. With a length of 27 cm, it enables the production of crutches that provide optimal ergonomic support at the elbow, ensuring comfort and stability for extended use.

Key Features:
✔ Made of reinforced aluminum alloy, ensuring excellent thermal and mechanical resistance for precise and durable molding.
✔ Ergonomic design adapted to adults' needs, providing better support and even weight distribution.
✔ Compatible with plastic injection machines, allowing the use of recycled polypropylene granules.
✔ High-quality material, ensuring maximum durability and a smooth finish.
✔ Ideal for orthopedic centers and manufacturing workshops looking to produce robust and adult-adapted mobility aids.

This mold is designed for use with hydraulic injection machines, enabling the local production of orthopedic crutches using recycled polypropylene, contributing to lower medical equipment costs and a sustainable approach.

also referenced under: OOMAMOULEC27, CRM 82

5x2000x1000mm
Polypropylene homopolymer (PPH), Excellent thermoforming, Chemical and corrosion resistant, thermo-moldable at approx. 165°C, approx. 75° Shore D
74-01085

4x2000x1000mm
Polypropylene homopolymer (PPH), Excellent thermoforming, Chemical and corrosion resistant, thermo-moldable at approx. 165°C, approx. 75° Shore D
OPLAPOLYSKIN04
74-01084

3x2000x1000mm
Polypropylene homopolymer (PPH), Excellent thermoforming, Chemical and corrosion resistant, thermo-moldable at approx. 165°C, approx. 75° Shore D
OPLAPOLYSKIN03
74-01083

5x2000x1000mm
Polypropylene homopolymer (PPH), Excellent thermoforming, Chemical and corrosion resistant, thermo-moldable at approx. 165°C, approx. 75° Shore D
OPLAPOLYLIV05
74-01088

4x2000x1000mm
Polypropylene homopolymer (PPH), Excellent thermoforming, Chemical and corrosion resistant, thermo-moldable at approx. 165°C, approx. 75° Shore D
OPLAPOLYLIV04
74-01087

3x2000x1000mm
Polypropylene homopolymer (PPH), Excellent thermoforming, Chemical and corrosion resistant, thermo-moldable at approx. 165°C, approx. 75° Shore D
OPLAPOLYLIV03
74-01086

5x2000x1000mm
Polypropylene homopolymer (PPH), Excellent thermoforming, Chemical and corrosion resistant, thermo-moldable at approx. 165°C, approx. 75° Shore D
OPLAPOLYCHOC05
74-01090

4x2000x1000mm
Polypropylene homopolymer (PPH), Excellent thermoforming, Chemical and corrosion resistant, thermo-moldable at approx. 165°C, approx. 75° Shore D
OPLAPOLYCHOC04
74-01089

3x2000x1000mm
Polypropylene homopolymer (PPH), Excellent thermoforming, Chemical and corrosion resistant, thermo-moldable at approx. 165°C, approx. 75° Shore D
OPLAPOLYCHOC03
74-01082

12x950x950mm
Polyethylene foam material, thermo-moldable at approx. 110-130°C, approx. 30° Shore A
OPLAEVAFKIN12
74-00827

8x1100x1100mm
Polyethylene foam material, thermo-moldable at approx. 110-130°C, approx. 30° Shore A

7x1100x1100mm
Polyethylene foam material, thermo-moldable at approx. 110-130°C, approx. 30° Shore A

6x950x950mm
Polyethylene foam material, thermo-moldable at approx. 110-130°C, approx. 30° Shore A
OPLAEVAFKIN06
74-00826

5x1100x1100mm
Polyethylene foam material, thermo-moldable at approx. 110-130°C, approx. 30° Shore A