Densely woven cotton cloth evenly spread with synthetic resin bonded Aluminium Oxide (A). Very good grit bonding, high abrasion performance and long service life.
Type VSM KK 114 F: Brown fabric, for extremely demanding applications. This grade is particularly supple, resistant to oil and petroleum and can be torn in longitudinal direction to yield clean edges without fraying.
Packaging tape with integral tear-off cutter.
Application:
Predominantly for rubbing down metals by hand, but also suitable for all other materials.

The 8954 Tartan™ tape is a polypropylene tape reinforced with fiberglass and coated with a rubber resin adhesive. It provides good moisture resistance and has excellent initial adhesion.

- It is commonly used for general reinforcement of cardboard or light bundling and maintenance purposes.
- It adheres well to various surfaces.
- Strength: 135 N/cm.

Acrylic resin is very fluid, allowing, in combination with COPACRYL Jersey or COPACRYL Carbon resins, to add flexibility to composite parts.

The Soft resin cannot be used alone and must be incorporated into the Jersey or Carbon resin at a ratio of 10 to 30% to add flexibility to the fabricated device.

The polymerization of this resin occurs at room temperature by adding our SIPACRYL powder hardener, at a maximum ratio of 2% to 3% by weight compared to the amount of resin.

Combining COPACRYL Soft resin with Jersey or Carbon resins yields composite parts with the following characteristics:

Excellent mechanical properties
Very good skin tolerance
Ability to be thermoformed after curing (within the elasticity limits of the reinforcement fabrics used)
Can also be used with our natural reinforcements ORTHOFLAX®, ECO-BLACK, and HYBRIDS.

- vacuum unit for the manufacturing of thin-walled cast resin laminates and thermoplastic deep-drawing works

Features:
- 2 separate, electronically infinitely adjustable vacuum units with pressure gauge
- 4 connections for resin lamination
- 2 connections for deep drawing
- 2 connections for external units
- hose connection, inside Ø 6 mm
- 1,5 m power cord with grounded plug

Technical Data:
- dimensions W x D x H: 425 x 385 x 220 mm
- suction capacity: 25 l/min, approx. 80 % vacuum
- Power requirements: 220 – 230 V / 50 Hz / 1 Ph / 0.14 kW
- Special voltages upon request.
- Weight: 18 kg

Plastic acrylic resin (non-toxic), pigment dye. Clean tools with water. High hardness, low shrinkage. Protective varnish for the exterior. Practical working time 20 to 30 min. Setting time 45 to 60 min. Dosage 2 for 1, 100 g / 50 g, variable depending on the application. Consumption 200 to 300 ml per m². Realization of decorative or technical elements by molding, laminating or projection. Interior and exterior decor panel. Application in casting or in lamination with fabric + fiberglass reinforcement. Direct molding on polystyrene / bodywork. Clean use, non-toxic, durable over time, low water permeability. Supplied with: 1 Part B bottle.
Dry milk-white color.

When sprayed, the Teflon ™ / PTFE microparticles ensure clean dry lubrication without oil-covered hands, adhesive protection and effective reduction of static, dynamic and rolling friction.
Dry lubrication and hygienic solid.
No adhesion of dirt and dust on the treated surface.
No formation of annoying lubricant residues.
Oil and fat free.
Hygienic, clean and ecological.
Durable and resistant lubrication and sliding effect.
Resin-free, non-hardening.
High material compatibility (all metal and plastic parts!).
Silicone and acid free.
Execution: Aerosol can
Content: 0.4 l
Color: transparent
Boiling point: 78 ° C
Flash point: -104 ° C
Auto-ignition temperature: 400 ° C
Water solubility: insoluble
Signaling of hazardous substances: SGH02 Flammable
Class of dangerous goods: 2.1
UN number: UN1950

To lighten resins and save material

- for cast resin and deep-drawing processes, with two separate vacuum systems, electronically controlled with digital display, vacuum pressure continuously adjustable, with 1.5 m power cord
- 6 connections for lamination 2 connections for deep-drawing 2 connections for external units, e.g. additional tank
- 25 L/min
- 200 mbar
- 230V, 50Hz, 0.14kW
- 425x385x220mm
- 20kg

The security storage cabinets can also be operated without a connection to a technical exhaust system (exhaust fan) if the compensating measures for explosion protection according to item 4.2, paragraph 3 of the Technical Rules for Flammable Liquids (TRbF) 22 can be implemented. If the compensating measures cannot be taken, the cabinets must be connected to a separate exhaust fan (we recommend the 760E11 air circulation filter attachment, 245) or coupled to an available lamination resin workstation with exhaust fan.

Version: Fire-resistant security storage cabinet 90 minutes according to European standard EN 14470-1, CE-compliant according to EN 45014, GS-tested
Equipment: Exhaust nozzle (nominal size 80 mm) for connection to building-side exhaust air or 760E11 Air circulation filter attachment , 3x shelves, height-adjustable feet
Dimensions WxDxH: 1200x600x2065mm
Interior dimensions WxDxH: 1095x450x1825mm
Bottom drip pan:1 piece (37.6 litres)
Shelf as storage surface:3 shelves
Load capacity: 75 kg per shelf
Weight: 375 kg
Colour: Light grey (RAL 7035)
To be used for: For storage of flammable, liquid and solid hazardous materials in work spaces according to regulations

Equipment Connection to an external fan, air curtain, explosion-protected lighting, cabinet
Dimensions WxDxH 1,200 x 750 x 2,200 mm
Air exhaust nozzle Ø 160 mm
Electrical connection in V/Hz/kW 1x 230/ 50/ 0.071
Weight 170 kg
Colour Light grey (RAL 7035)
To be used for Mixing lamination resin, the 758F21 Security storage cabinet can be placed in the cabinet

For fixing and filling a variety of materials
Particularly suitable for narrowing wood and plastic sockets
Works well with materials commonly used in orthopaedic technology, e.g., wood, lamination resin, plastic
The proven classic material!
Used with 617P14 Hardener Paste
Base: unsaturated polyester resins with special light fillers dissolved in styrene
Can be coloured with Ottobock resin colour pastes
Very low density
Easy to sand
Quick curing
Good adhesive qualities

3x2000x930mm

For preparing models
For forming temporary dummies when there is no direct resin contact
Easily formable
Easy to apply, even on larger surfaces

Glass-hard resin with very good adhesive properties

Transparent, thermoplastic skin-friendly, can be mixed with all other RESACRYL acrylic resins. Cuing by means of approx. 1 – 3 % hardener powder.

MOLD MAX™ RTV silicone rubbers will reproduce the finest detail and are suitable for a variety of industrial and art related applications including making molds for reproducing prototypes, furniture, sculpture and architectural elements. MOLD MAX™ silicones can also be used to cast a variety of materials including wax, gypsum, low melt alloys/metals and urethane, epoxy or polyester resins (without using a release agent).

The ECO-Friendly Laminating Resin for Elevated Vacuum Systems

Discover ECO-Extreme Resin, the environmentally friendly resin specially designed to seal laminating materials with unmatched efficiency. Perfect for creating airtight sockets in elevated vacuum suspension systems, this resin offers superior strength and ease of use.

Key Features
Eco-Friendly Formula: Free from hazardous air pollutants like styrene and methyl methacrylate, making it safe for both the user and the environment.
Enhanced Strength: Provides a significant increase in flexural strength for thin and rigid laminates compared to standard resins.
Airtight Sealing: Designed for elevated vacuum suspension systems, ensuring a perfect seal.
Fast and Easy Curing:
Cure time: 10-12 minutes at room temperature.
Heat-free curing technology for tack and fuzz-free results.
Practical Packaging:
Available in 4-gallon boxes (15.14 liters) with no Hazmat fees.
Comes with a paste promoter for convenience.
Extended Shelf Life: Up to 1 year for lasting reliability.
Elevate your laminating process with ECO-Extreme Resin – the resin that combines strength, efficiency, and sustainability.