Ergonomically shaped T-handle with easy-grip Santoprene® surface and an impact resistant plastic core. Blade of chrome vanadium special steel. Surface chrome-plated.
Impact resistant plastic T-handle. Blade of special vanadium steel, surface matt chrome-plated.

Ergonomically shaped T-handle with easy-grip Santoprene® surface and an impact resistant plastic core. Blade of chrome vanadium special steel. Surface chrome-plated.
Impact resistant plastic T-handle. Blade of special vanadium steel, surface matt chrome-plated.

Material of blade: HSS
Number of blades: 1
Blade length: 75 mm
Blade width: 3.2 mm

Light alloy holder (120 mm long) with collet chuck and interchangeable detachable three-square hollow section blade of special tool steel or carbide. Blade can be taken out and reground along its entire length.

Ergonomically shaped T-handle with easy-grip Haptoprene® surface and an impact-resistant plastic core. Blade of chrome vanadium special steel. Surface nickel-plated and chrome-plated. Size 4 − 10 with side drive.

Ergonomically shaped T-handle with easy-grip Haptoprene® surface and an impact-resistant plastic core. Blade of chrome vanadium special steel. Surface nickel-plated and chrome-plated. Size 4 − 10 with side drive.

Ergonomically shaped T-handle with easy-grip Haptoprene® surface and an impact-resistant plastic core. Blade of chrome vanadium special steel. Surface nickel-plated and chrome-plated. Size 4 − 10 with side drive.

Ergonomically shaped T-handle with easy-grip Haptoprene® surface and an impact-resistant plastic core. Blade of chrome vanadium special steel. Surface nickel-plated and chrome-plated. Size 4 − 10 with side drive.

Ergonomically shaped T-handle with easy-grip Haptoprene® surface and an impact-resistant plastic core. Blade of chrome vanadium special steel. Surface nickel-plated and chrome-plated. Size 4 − 10 with side drive.

Ergonomically shaped T-handle with easy-grip Haptoprene® surface and an impact-resistant plastic core. Blade of chrome vanadium special steel. Surface nickel-plated and chrome-plated. Size 4 − 10 with side drive.

Ergonomically shaped T-handle with easy-grip Haptoprene® surface and an impact-resistant plastic core. Blade of chrome vanadium special steel. Surface nickel-plated and chrome-plated. Size 4 − 10 with side drive.

Ergonomically shaped T-handle with easy-grip Haptoprene® surface and an impact-resistant plastic core. Blade of chrome vanadium special steel. Surface nickel-plated and chrome-plated. Size 4 − 10 with side drive.

Straight hexagonal shank with ball point.
Kraftform handle made of impact-resistant plastic with integral soft zones. Blade of high quality tool steel, surface matt chrome-plated, black tips.

Straight hexagonal shank with ball point.
Kraftform handle made of impact-resistant plastic with integral soft zones. Blade of high quality tool steel, surface matt chrome-plated, black tips.

Straight hexagonal shank with ball point.
Kraftform handle made of impact-resistant plastic with integral soft zones. Blade of high quality tool steel, surface matt chrome-plated, black tips.

Straight hexagonal shank with ball point.
Kraftform handle made of impact-resistant plastic with integral soft zones. Blade of high quality tool steel, surface matt chrome-plated, black tips.

Straight hexagonal shank with ball point.
Kraftform handle made of impact-resistant plastic with integral soft zones. Blade of high quality tool steel, surface matt chrome-plated, black tips.

Straight hexagonal shank with ball point.
Kraftform handle made of impact-resistant plastic with integral soft zones. Blade of high quality tool steel, surface matt chrome-plated, black tips.

The tapered Torx® HF profile reliably retains all Torx® screws. L-shank; through hardened (hard and tough).
Ideal for starting and tightening Torx® screws where access is difficult.
Material: Chrome vanadium steel, manganese phosphated.
Supplied with table use:
1 each L-wrench in a plastic clip: TX8; TX9; TX10; TX15; TX20; TX25; TX27; TX30; TX40

Ergonomically shaped T-handle with easy-grip Haptoprene® surface and an impact-resistant plastic core. Blade of chrome vanadium special steel. Chrome-plated, black tips. Size TX20 − TX40 with side drive.

Ergonomically shaped T-handle with easy-grip Haptoprene® surface and an impact-resistant plastic core. Blade of chrome vanadium special steel. Chrome-plated, black tips. Size TX20 − TX40 with side drive.

Two cross-head profiles of different sizes, with 90° offset blades. Vanadium-molybdenum steel. Handle made of high quality impact resistant plastic.

Multi-component power grip. Blade of chrome vanadium steel, surface chrome-plated. Chrom-Top tips for optimum rust protection.
overall length: 82 mm
Blade length: 25 mm
for screw ⌀: 2.1 − 3 mm
Cross-head size: 1

Multimatized handle with grip zone optimized for torque and comfort

Multimatized handle with grip zone optimized for torque and comfort

with straight jaws
74-00823

with straight jaws
74-0082

with straight jaws
74-00821

74-00842

High quality malleable cast iron clamping arms; strong prismatic steel slide beam, knurled, electro-galvanised. Low friction steel spindle, burnished with trapezoidal thread and movable jaw. Instant (high speed) adjustment, reliable clamping. Up to size 400 with plastic protective cover on the clamping jaw, from size 500 onwards without protective cover.
Standard: DIN 5117
Cross section of the slide rail: 35×11 mm
Throat: 120 mm
Jaw capacity: 500 mm
74-01757

Octagonal body, uncoated head

Octagonal body, uncoated head

The blanks are precision forged, ground and have an exact cut of even density and depth. After most careful tempering while hardening, these quality wood rasps/ files achieve the best performance and tool life.
Norm: DIN 7263
Cross section: 25×7 mm
Length without tang: 250 mm

Swiss precision needle files satisfy the highest demands for accuracy of shape, precision cut, removal rate and tool life. Cut length = 1/2 file length. Manufactured from special steel for precision files with high wear resistance (65-66 HRC). Precisely determined shapes, special cut angle and large selection of different cuts. High metal removal rate.
Overall length: 160 mm
Diameter: 2.9 mm

Swiss precision needle files satisfy the highest demands for accuracy of shape, precision cut, removal rate and tool life. Cut length = 1/2 file length. Manufactured from special steel for precision files with high wear resistance (65-66 HRC). Precisely determined shapes, special cut angle and large selection of different cuts. High metal removal rate.
Overall length: 200 mm
Cross section: 6.5×2.0 mm

Swiss precision needle files satisfy the highest demands for accuracy of shape, precision cut, removal rate and tool life. Cut length = 1/2 file length. Manufactured from special steel for precision files with high wear resistance (65-66 HRC). Precisely determined shapes, special cut angle and large selection of different cuts. High metal removal rate.
Overall length: 200 mm
Cross section: 6.5×1.3 mm

The blanks are precision forged, ground and have an exact cut of even density and depth. After most careful tempering while hardening, these quality wood rasps/ files achieve the best performance and tool life.
Norm: DIN 7263
Cross section: 29×9 mm
Length without tang: 300 mm

The blanks are forged and ground; manufactured with an exact cut of even density and depth using special machines. These non-convex files have tooth profiles appropriate to each grade of file.
Cuts on all faces; convex end.
The quality file for workshop use with long tool life and high removal rate.
Standard: DIN 7261 form D
Length without tang: 250 mm
Width: 10 mm
74-01703

The blanks are forged and ground; manufactured with an exact cut of even density and depth using special machines. These non-convex files have tooth profiles appropriate to each grade of file.
With helical cut; convex end.
The quality file for workshop use with long tool life and high removal rate.
Standard: DIN 7261 form E
Length without tang: 250 mm

The blanks are forged and ground; manufactured with an exact cut of even density and depth using special machines. These non-convex files have tooth profiles appropriate to each grade of file.
With helical cut; convex end.
The quality file for workshop use with long tool life and high removal rate.
Standard: DIN 7261 form E
Length without tang: 250 mm
74-00730

The blanks are forged and ground; manufactured with an exact cut of even density and depth using special machines. These non-convex files have tooth profiles appropriate to each grade of file.
Cuts on 3 faces; square end.
The quality file for workshop use with long tool life and high removal rate.
Standard: DIN 7261 form A
Length without tang: 250 mm
74-00729

The blanks are forged and ground; manufactured with an exact cut of even density and depth using special machines. These non-convex files have tooth profiles appropriate to each grade of file.
Cuts on 3 faces; square end.
The quality file for workshop use with long tool life and high removal rate.
Standard: DIN 7261 form A
Length without tang: 250 mm
74-00720

Saw blade for wood and plastic of high-quality special steel with bright reinforced back. Fine teeth, hardened tips, set and sharpened, 35 mm depth of cut.
With fixed, varnished handle offset to the right.
TPI: 15
Blade length: 250 mm

Blade thickness: 0.4 mm
Blade length: 150 mm
TPI: 25

Small and handy, good cutting performance.
With adjustable natural varnished wooden handle. Can be clamped at any point on the frame. Frame solid nickel-plated steel square bar.
Supplied with: Including general-purpose saw blade for metal, aluminium, wood and plastic. Blade length 150 mm.
Blade length: 150 mm
Overall length: 310 mm

Execution:
Body in anodized aluminum, deburring cone in special hardened steel.
Use:
Professional interior and exterior deburring of stainless steel, steel, copper, plastic and aluminum pipes.
Technical data
For ⌀ tube: 8 mm - 35 mm
Use: Stainless steel; Steel; Copper; Aluminum
Material: Special hardened steel
Housing material: Anodized aluminum

With long, slim jaws and flush fitting joint.
Pliers chrome-plated, plastic coated handles.
Standard: DIN ISO 5745
Material: Chrome vanadium steel, drop-forged and oil-hardened.
overall length: 160 mm
Jaw length: 41 mm

With short strong jaws (round). Smooth jaws.
Jaws chemically blacked, polished head, plastic coated handles.
Standard: DIN ISO 5745
Material: Special tool steel, drop-forged, and oil-hardened.
overall length: 140 mm
Jaw length: 28 mm

With long, slim jaws and flush fitting joint.
Pliers chrome-plated, plastic coated handles.
Standard: DIN ISO 5745
Material: Chrome vanadium steel, drop-forged and oil-hardened.
Jaw length: 42 mm
overall length: 140 mm

With short strong jaws (flat). Serrated inside jaws.
Jaws chemically blacked, polished head, plastic coated handles.
Standard: DIN ISO 5745
Material: Special tool steel, drop-forged, and oil-hardened.
Type of jaws: inner face roughened
Jaw design: flat
Jaw length: 30 mm
overall length: 160 mm