also referenced under: OOMAMARPOL3500A, OOMAMARPOL3500C CRM 90, CRM 90.1

with round jaws
74-00809

335mm
74-00835

Complete thermoforming device with filtration and regulation of vacuum supply.
Two working positions :
- horizontal tube for thermoforming by lay-up (ex : for spinal orthoses)
- vertical adaptator for thermoforming by stamping (ex : for sockets)

incl. mounting bar for workbench assembly

5x2000x1000mm

3x2000x1000mm
Polypropylene copopolymer (PPC), Excellent thermoforming, Chemical and corrosion resistant, thermo-moldable at approx. 165°C, approx. 75° Shore D

4x2000x1000mm
Polypropylene copopolymer (PPC), Excellent thermoforming, Chemical and corrosion resistant, thermo-moldable at approx. 165°C, approx. 75° Shore D

also referenced under: OOMAMARP3000C, CRM 92

also referenced under: OOMAMARP3000O, CRM 92.2

also referenced under: OOMAMARP3000N, CRM 92.1

OPLAPOLYRCH04
74-01081

Chrome vanadium steel, through hardened (toughened), surface manganese phosphated.
L-form shaft; ball point can be applied up to an angle of 30°.
Stored in: Plastic clip
1 each L-wrench: Size 1.5; 2; 2.5; 3; 4; 5; 6; 8; 10 mm
74-01202

EMEALEVEL400
74-00683

For stratification
1m x 22.5m x 80 microns

Coating of a modified acrylic adhesive, resistant to light and aging. The adhesive is highly resistant to plasticizers and features a high initial adhesive strength and good shear resistance. Applications include mounting signs, nameplates, reinforcing doors in the automotive industry, attaching plastic bags, continuous paper and poster mounting, and joining paper and film rolls.

1 straight and 1 angled point; nylon handle. Point hardness 48 - 55 HRC.
overall length: 230 mm
Type of product: Steel scriber
74-01748

This type of liners ensures comfort and protection in a rigid laminated or thermoformed socket for patients with low activity level or for first fitting.
We recommend to wear a sock, a sleeve or a jersey as an interface between the skin and the KEASY liner.

50 cm

∅11 to 17mm

Versatile application possibilities
Two-stage gear ratio
Tool holder MK 2
Safety electronics in 24 Volt version
EMC filter class C1
Drilling and milling head can be tilted by ± 90 ° on both sides, thus drilling and milling in angular position as required
Height-adjustable and large-dimensioned protective screen with microswitch
Accurate delivery through positionable scale rings on all handwheels
Simple and clear operating unit with on-off switch, potentiometer and emergency stop impact switch
Infinitely variable speed from 100 to 3,000 min-1
High concentricity measured by tapered roller bearing better than 0.015 mm in quill
Stable column with dovetail guide via wedge bars adjustable on all 3 axes
Game in the feed spindle adjustable and adjustable
Column laterally displaceable for extended application
Massive cross table with T-slots and coolant channel as well as adjustable end stops
Integrated longitudinal scale in the cross table
All travel paths can be read on scales
Clean milling pattern by individually clamped guides
Inexpensive and stable in value

also referenced under: OPTImill BF 16Vario

Uniformly heats thermoplastic sheet materials commonly used to form prosthetic and orthotic devices. Infinitely adjustable temperature. Heating surfaces are coated with air permeable Teflon sheeting.Two gas cylinders assist in lifting the cover and hold it open at a 45° angle.

Dimension : Out Side: W.125—D.110—H.90 cm
Dimension : Top cover Open: W.125—D.110—H.180 cm
Dimension : Heater Area: W.100—D.85 cm
Power Supply: 220 Volt 50 Hz
Power cord: With CEE plug 5 × 16 A and CEE socket 5 × 16
Heating Pipe: Type 12 pcs / 550 x 12 : 6.600 Watt
Temparature Control: Digital Control 250 °C Max. J Type
Process Completed: Sound and red warning lamp
Upper and Lower Surface: Teflon 0.25 mm
Color: Ral 7035 & 7045
Weight Net: 152 Kg
Boxed : Dimension and Total Weight: W.140 -D.120- H.120 cm 225 kg

Dimensions WxDxH: 1390 x 980 x 850 mm
Power requirements: 380V / 50 Hz / 9,9 kW
Temperature range: 50 °C - 200 °C
Working surface W x D: 1250 x 1050 x 860mm