Content:
Urethane Bonding Component A
Urethane Bonding Component B
Chopart PU, Set Small Parts
V.A. Chopart Sohlen/Bonding Kit
Primer for Chopart Bonding

The 3M spray adhesive is versatile and ideal for the reliable, clean and fast bonding of large areas. It is ideal for optimizing complex production processes and simplifying everyday work in almost all craft and industrial sectors. It is also suitable for everyday use at home. It eliminates the need for brushes, spray guns and other tools. The spray adhesive is free from silicone and chlorinated solvents. The optimal spray distance is 30 cm

These sealants replace hemp, sealing tapes, and pastes, they are resistant to gases, liquids, air, water, oils, hydrocarbons and many chemical products. Complete surface contact ensures a 100% seal. Unscrewing, or correction of position during assembly can be performed using conventional tools at any time before the sealant hardens. No sealant residues to block filters and valves.
The stick with pasty sealant is economical in consumption, no drips after use.
Application:
Improved bonding of suckers.
Note:
Before applying sealant, clean the threads with general-purpose cleaner
Labelling of hazardous substances: GHS07 Caution
Content of stick: 19 g
Colour of sealant: orange
minimum break-away torque: 5.8 N·m
Temperature range: -55 °C - 150 °C
for thread size M to: M80
for imperial thread size: 3 inch
Strength for disassembly: low
fluorescent:no

When sprayed, the Teflon ™ / PTFE microparticles ensure clean dry lubrication without oil-covered hands, adhesive protection and effective reduction of static, dynamic and rolling friction.
Dry lubrication and hygienic solid.
No adhesion of dirt and dust on the treated surface.
No formation of annoying lubricant residues.
Oil and fat free.
Hygienic, clean and ecological.
Durable and resistant lubrication and sliding effect.
Resin-free, non-hardening.
High material compatibility (all metal and plastic parts!).
Silicone and acid free.
Execution: Aerosol can
Content: 0.4 l
Color: transparent
Boiling point: 78 ° C
Flash point: -104 ° C
Auto-ignition temperature: 400 ° C
Water solubility: insoluble
Signaling of hazardous substances: SGH02 Flammable
Class of dangerous goods: 2.1
UN number: UN1950

Color white-transparent, water and oil resistant, resistance to the action of most chemicals, NLGI consistency class 2-3, -40 ° C - + 200 ° C, non-toxic.
For lubrication between metal and plastic or metal and elastomer, lubricating grease for valves, O-rings and ball valves

Color white-transparent, water and oil resistant, resistance to the action of most chemicals, NLGI consistency class 2-3, -40 ° C - + 200 ° C, non-toxic.
For lubrication between metal and plastic or metal and elastomer, lubricating grease for valves, O-rings and ball valves

To lighten resins and save material

The use of thread lockers prevents unintentional detachment and loosening of screw connections. One-component anaerobic adhesives are suitable for all types and shapes of threads. The screw connections are sealed. Reliably prevent slipping.
Liquid thread lock.
Weak tightening - Loosening possible with a normal tool.
Medium tightening - Loosening still possible with a normal tool.
Very strong tightening - Loosening only possible with a special tool or by heating (> 150 ° C).
Medium resistance, serves as a thread lock while ensuring tightness.
Manufacturer no .: 243
Chemical basis: Dimethacrylate ester
Dynamic viscosity: 1'300 mPa · s - 3'000 mPa · s
Density: 1.15 g / cm³
Flash point: 93 ° C
Temperature range: -55 ° C - 180 ° C
Maneuverability after: 10 min
Usable after: 2 h
Property: thixotropic; fluorescent under UV light; waterproof; oil resistant; vibration resistant; prevents seizure
for material: Metal
for applications: Threadlockers; Grouting; Universal use
For thread sizes M up to: M36
Resistance class: Medium
Minimum initial breakaway torque: 26 N m
Disassembly: with normal tool
Blue color
Capacity: 50 ml
Storage temperature: 8 ° C - 21 ° C
Shelf life from date of manufacture: 24 mo
Hazardous Substance Markings: SGH07 Warning; SGH09 Environmental hazard
Dangerous goods class: 9
UN number: UN3082

The use of thread lockers prevents unintentional detachment and loosening of screw connections. One-component anaerobic adhesives are suitable for all types and shapes of threads. The screw connections are sealed. Reliably prevent slipping.
Liquid thread lock.
Use:
Weak tightening - Loosening possible with a normal tool.
Medium tightening - Loosening still possible with a normal tool.
Very strong tightening - Loosening only possible with a special tool or by heating (> 150 ° C).
For small screws up to M6 and for subsequent screw locking.
Manufacturer no .: 290
Chemical basis: Dimethacrylate ester
Dynamic viscosity: 20 mPa s - 55 mPa s
Density: 1.07 g / cm³
Flash point: 93.3 ° C
Temperature range: -55 ° C - 150 ° C
Maneuverability after: 20 min
Usable after: 3 h
Property: High capillarity; fluorescent under UV light; waterproof; oil resistant; vibration resistant; prevents seizure
for material: Metal
for applications: Threadlockers; Grouting; Porosity of weld seams; Porosity of cast iron and sintered metal parts; Pre-assembled screw connections
For thread sizes M up to: M6
Resistance class: Medium
Minimum initial breakaway torque: 10 N m
Disassembly: only by heating
Green color
Capacity: 50 ml
Storage temperature: 8 ° C - 21 ° C
Shelf life from date of manufacture: 29 mo
Hazardous substances marking: SGH07 Warning

High strength, dimethacrylate ester-based retaining compound with medium cure speed and low viscosity; suitable for filling small gaps.LOCTITE® 601 is a green, anaerobic, low viscosity, medium cure speed, dimethacrylate ester-based retaining compound suitable for a max. diametrical clearance of 0.1 mm. It is a high strength product for applications that require a permanent bond. Fixture time on steel is 25 min and service temperature from -55ºC to +150ºC. Fluorescence allows product presence to be monitored.

1-part product, requires no mixing
Medium cure speed
High strength for permanent bonds
Low viscosity, small gap filling
Fluoresces for presence monitoring

Universal use for joining various materials. Fast hardening and clean, almost invisible assemblies. Cures under the effect of ambient humidity.
Universal quick glue for almost the majority of materials, such as plastics, elastomers, metals, ideal for paper, cardboard, wood, leather and fabrics.
Manufacturer no .: 401
Chemical basis: Ethyl cyanoacrylate
Dynamic viscosity: 70 mPa s - 110 mPa s
Density: 1.05 g / m3
Form: liquid
Temperature range: -40 ° C
Maneuverability after: 5 s - 10 s
for material: Fabric; Wood; Plastic; Leather; Metal; Paper; Elastomers; Glass
Maximum deviation: 0.15 mm
Tensile and shear strength: 20 N / mm²
Color: transparent
Capacity: 20 ml
Storage temperature: 2 ° C
Shelf life from date of manufacture: 24 mo
Hazardous substances marking: SGH07 Warning
Dangerous goods class: 9
UN number: UN3334

With pneumatic door
Temperature: 60° to 250°
50-60Hz, 850W
Dimensions outside: 1640x1134x1756mm
Working area: 1828x1828mm

200gr/m2, 2x2 twill
Carbon fibers are very strong · Light weight · Reduced elongation at break · Very resistant to temperature variations. This fabric is much stronger than most metals or other fiberglass reinforced materials. This fabric is elastic, very resistant and attenuates vibrations. · The material to the aeronautical standard makes it possible to manufacture fine agglomerates but with high resistance.

74-01080

- Orthopaedic sanding machine
- Enlarged work-space left, without trimmers
- Integrated extraction system with cotton filter
- Suction wall placed back widely
- Removable suction nozzles n Heel breaster on bajonet
- Sanding belts 1× 40×Ø175 + 1×100×Ø100 mm
- Separate belt control
- Suction flap activation controlled by each respective drive
- Sanding wheel on bajonet
- Pneumatic sanding belt tensioning
- Fully automatic filter cleaning
- Additional fine dust filter incl.
- Naumkeag multi-adjustable
- Operation by double push buttons
- Ergonomic HARDO Design
- Colour: light grey RAL 7035
- Electr. specifications: 400V/3Ph/50Hz/3,2kW
- Dimensions: 1150×780×1855 mm (w×d×h)
- Weight: 280 kg

Optimized for material: Wood
Panel thickness (soft wood): 3-65 mm

also referenced under: EMACSAWSJ6B2

- for cast resin and deep-drawing processes, with two separate vacuum systems, electronically controlled with digital display, vacuum pressure continuously adjustable, with 1.5 m power cord
- 6 connections for lamination 2 connections for deep-drawing 2 connections for external units, e.g. additional tank
- 25 L/min
- 200 mbar
- 230V, 50Hz, 0.14kW
- 425x385x220mm
- 20kg

2x2000x1000mm

Can be shaped easily.
Can be worked with hot water or with a heat gun.
Perfectly matches the patient's shapes.
Good weldability.
Lightweight and resistant.
Can be used on a model or directly on the patient who has been previously protected with Jersey.
> For finger and wrist splints

First aid kit Domino. Content according to DIN 13157. Impact-resistant and temperature-resistant, including wall bracket. Internationalization of the imprint, as well as the table of contents and the instructions for first aid in many European languages. The case is marked on the outside in the following languages: German, English, French, Italian, Dutch, Danish, Swedish, Spanish, Czech, Slovak, Polish, Portuguese, Finnish, Greek, Croatian, Hungarian, Slovenian, Turkish

made of premium steel, with round, curved and plastic-coated shank, flexible blades, polished

For processing all types of leather, rubber and other materials. With long arm and frame pressing device. Cutting width up to 190 mm, splitting and cutting width max. 30 mm.

also referenced under: OOMAOVENTHERDIG, CRM 53

- Perfect for cutting soft and hardwoods, plastics, plastics and non-ferrous metals.
- Tooth-tip Hardened Band Saw Blade with approx. 60-62 HRC
- The tooth shape, the arrangement of the teeth and the hardened tooth tips guarantee a perfect straight cut and a long service life
- The heat treated steel strip counteracts the bending of the band saw blade and thus reduces the risk of sheet tearing
- Saw bands German quality stainless steel with optimum price-performance ratio

Hardener for pedilen foam

Very stable and rigid foam to fabricate positive moulds and models subject to high mechanical load, for example lasts for shoes and insoles as well as tip additions.
- expansion factor: approx. 1.4
- density: approx. 700kg/m³
- good nailable

Optimized for material: Steel

also referenced under: EMACSAWSJ6B3

This vise tilts 90 degrees and is solidly constructed. Thanks to its excellent clamping force, the vice does not move when drilling or milling.
Made of cast iron, the vise is strong and sturdy. This vise has an adjustable tilt angle between 0 and 90 degrees, and a locking pin on the chain to secure it every 15 degrees.
This unit also features a stable base, which can be easily mounted on your workbench. It is compact and lightweight, making it suitable for mobile use.

Specifications
Material: cast iron
Jaw width: 105mm
Jaw opening: 110 mm
Jaw depth: 47mm
Base size: 190 x 185 mm (L x W)
Tilt adjustment: 0 - 90 degrees
Height: 120mm (lying), 220mm (standing)

also referenced as: OOMAOPRECR75C, CRM 73

Version: Strong, forged design, special tough varnish; taper section (cutting part) bright metal. Slight internal taper for releasing the cut pieces.
Application: For punching or manufacturing gaskets and gasket rings of rubber, leather, felt, plastic, cork, fabric or similar materials.
Supplied with: 1 each steel wad punch ⌀ No. 832001: 15 pcs.
size 2-30
(2 mm increment)
Note: Use an underlay of wood, leather etc. when punching to avoid damage.

Technical Data
Packaging: Tool roll
Number of steel wad punches: 15
Type of product: Punching tool

Stainless Steel

Stainless Steel

Vacuum-press for pairwise manufacturing of insoles and foot-orthotics. With vaccum pump

Type: Vacuum-press , Bench-top version for use with external vacuum-supply
Frame Dim. (LxW): 520 x 350mm, gas-shock supported, frame tension adjustable
(equipped with Soft-bladder)
Vacuum-Pump: Rotary vane, oil- and maintenance-free, 6 m/h / 200mbar, vacuum-automatic controlled
Power supply: 230V / 50Hz
W 360 x D 650 x H 250 mm W 360 x D 650 x H 250 mm
Weight: 30 kgs

Vacuum-press for manufacturing of insoles and foot-orthotics. With vacuum pump

Type: Vacuum-press , Bench-top version for use with external vacuum-supply
Frame Dim. (LxW): 520 x 350mm, gas-shock supported, frame tension adjustable (equipped with Soft-bladder)
Vacuum-Pump: Rotary vane, oil- and maintenance-free, 6 m/h / 200mbar, vacuum-automatic controlled
Power supply: 230V / 50Hz
W 360 x D 650 x H 250 mm
Weight 30 kgs

Excellent formability, very resistant to stress cracking and abrasion with high strength and good energy absorption properties.
Processing temperature (°C) *oven temperature: 165-180°C

Suitable for:
All FEIN Multitools, as well as all other common tools on the market.
Cutting width: 35mm
Content: 5
Material: Wood, plastics

100pc

Dimensions: 865x670x1125-1525mm
Power: 0.75 kW
Voltage: 230V
Amperage: 7A

Dimensions WxDxH: 600 x 600 x 990 mm
Material: Steel
Vacuum connection: 13mm
Weight: 45 kg
Colour: Light grey (RAL 7035)
Scope of delivery: 704B1=140 vice, 704G11 clamping fixture "Orthofix" for exhaust tubes, 755X221 vacuum pipe with exchangeable vacuum forming plate (diameter 360 mm), ball valve, 4m hose, mounting materials for bolting to the floor
Optional accessories: 704Y30 Floor plate - Steel, galvanised, 800 x 800 x 10 mm
755X181 Foot pedal for vacuum control

Equipment: Double doors, centrally locking, security lock, 4 height-adjustable slotted shelf inserts
Dimensions WxDxH: 950 x 400 x 1,950 mm
Material: Steel sheet
Depth: 400 mm
Weight: 75 kg
Colour: Light grey (RAL 7035)

The security storage cabinets can also be operated without a connection to a technical exhaust system (exhaust fan) if the compensating measures for explosion protection according to item 4.2, paragraph 3 of the Technical Rules for Flammable Liquids (TRbF) 22 can be implemented. If the compensating measures cannot be taken, the cabinets must be connected to a separate exhaust fan (we recommend the 760E11 air circulation filter attachment, 245) or coupled to an available lamination resin workstation with exhaust fan.

Version: Fire-resistant security storage cabinet 90 minutes according to European standard EN 14470-1, CE-compliant according to EN 45014, GS-tested
Equipment: Exhaust nozzle (nominal size 80 mm) for connection to building-side exhaust air or 760E11 Air circulation filter attachment , 3x shelves, height-adjustable feet
Dimensions WxDxH: 1200x600x2065mm
Interior dimensions WxDxH: 1095x450x1825mm
Bottom drip pan:1 piece (37.6 litres)
Shelf as storage surface:3 shelves
Load capacity: 75 kg per shelf
Weight: 375 kg
Colour: Light grey (RAL 7035)
To be used for: For storage of flammable, liquid and solid hazardous materials in work spaces according to regulations

Simple, particularly lightweight compact scale.
Very simple operation by means of 2 keys.
- Taring function (accumulation of weights) for simple zeroing of the display.
- Battery operation, automatic shutdown after 3 minutes.
- Connection of an AC adapter possible.
Delivery:
With 1 battery
Technical data
Maximum weighing range: 0g - 6000g
Reading: 0.1g
Manufacturer Part Number: EMB
Tray dimensions: ⌀150
Width: 170mm
Depth: 244mm
Height: 39mm
Power supply: Battery operation
Number of batteries included: 2
Net weight: 0.55kg