Made of stainless steel, with return spring.
Straight jaws, plastic coated handles.
Widely applicable. Ideal for thin sheet metal, plastics, leather, cardboard, paper, cord, fabrics etc.
overall length: 140 mm
Length cutter. 30 mm

260mm

210mm

240mm
74-00841
719G2

74-00806, 719G1

74-00692

150mm

Strong, very long, and slim blades; fully nickel-plated. Made of stainless steel.
Paper, fabric, thin material, and much more.
overall length: 250 mm

Robust blades. Made of stainless steel

Soft ergonomic plastic handles. Special stainless steel blades (52 - 54 HRC).
Paper, cardboard, fabric, leather, rubber, rope, etc.
Total length: 250 mm

Ergonomic soft-grip handles of plastic. Blades of non-rusting stainless steel (52 - 54 HRC).
Paper, cardboard, fabric, leather, rubber, rope, etc.
Total length: 225 mm
74-00786

Ergonomic soft-grip handles of plastic. Blades of non-rusting stainless steel (52 - 54 HRC).
Paper, cardboard, fabric, leather, rubber, cord, and much more.
overall length: 200 mm

For cutting TF sleeves, sleeves with textile coating

Fabric shears with micro toothing and ergonomic 2-component handles. Blades of stainless steel.
Glass fibre, aramides, and many more
Length blade: 85mm
overall length: 200mm

⌀45 / L=165mm

74-00869

TINA knives for the highest demands.

Finest handmade special knives "made in Germany" for leather and book restoration.

In a special hardening process, a unique quality is achieved that has been appreciated by users for decades.
ETOOCUTTKNLW

Delivered with: 5 chisels, 1 spare spring
Air requirement average, approx: 240 l/min
Working pressure: 6.3 bar
Chuck: 10 mm
Stroke count: 2200 min¯¹
Impact strength: 9.5 J
74-00803

L 300mm

also referenced under: EMACWELDWMHA, CRM 23, 74-01554

Made of tough rubber (90 Shore), non-rebound; with powerful impact. Worn faces can be reworked by turning on a lathe. With ash wood handle.
Head length: 90 mm
Head ⌀: 54 mm
Weight: 300 g
Handle length: 320 mm
74-00747

with nail puller and countersunk tip, painted black, with nail holder, with tubular steel handle and steel ring for better protection of the handle, with plastic handle

ETOOHAMMBALL
74-00691

ETOOHAMMB250

Sturdy metal central piece with handle of hickory, with nylon handle protection sleeve and ring wedge. The nylon inserts are impact resistant and wear-resistant, and are attached to the central piece by a double action system.
Central piece of steel.
74-01201

Sturdy metal central piece with handle of hickory, with nylon handle protection sleeve and ring wedge. The nylon inserts are impact resistant and wear-resistant, and are attached to the central piece by a double action system.
Central piece of steel.

With hickory handle ergonomic shape, varnished.
Hammer head drop forged and ground to size. Carefully hardened and tempered. Head painted, face and peen bright finished.
With nylon handle protection sleeve. Size 200−1000 additionally with forged-on handle protection collar.

With hickory handle ergonomic shape, varnished.
Hammer head drop forged and ground to size. Carefully hardened and tempered. Head painted, face and peen bright finished.
With nylon handle protection sleeve. Size 200−1000 additionally with forged-on handle protection collar.
ETOOHAMMRI500
74-00736

With hickory handle ergonomic shape, varnished.
Hammer head drop forged and ground to size. Carefully hardened and tempered. Head painted, face and peen bright finished.
With nylon handle protection sleeve. Size 200−1000 additionally with forged-on handle protection collar.
ETOOHAMMRI03

With hickory handle ergonomic shape, varnished.
Hammer head drop forged and ground to size. Carefully hardened and tempered. Head painted, face and peen bright finished.
With nylon handle protection sleeve. Size 200−1000 additionally with forged-on handle protection collar.
ETOOHAMMRI02
74-00734

With hickory handle ergonomic shape, varnished.
Hammer head drop forged and ground to size. Carefully hardened and tempered. Head painted, face and peen bright finished.
With nylon handle protection sleeve. Size 200−1000 additionally with forged-on handle protection collar.

Ceramic bonded combination oilstones, hardness O/ P. One side coarse for roughing, the other side fine for finishing.
Special Aluminium Oxide 180 grit (medium) with long working life. Other side precision abrasive, 500 grit (very fine), very free cutting, high surface quality.
Application:
For deburring, finish smoothing of irregularities, rounding of edges.

The grain, the binder, the abrasion-enhancing additives and the trimming disk reinforcement offer optimal abrasion performance and their service life depends on the different areas of use.
Disc to be deburred for steel and stainless steel with long service life and high abrasion capacity.
Maximum rotation speed: 80 m / s
⌀ bore: 22,23 mm
Max rotation speed: 6 600 min-1
Thickness of disc: 8 mm
⌀ disc: 230 mm

for 701P250=* Belt sander
Length: 2,175 mm
Grit: 40
Width: 320 mm
Weight 0.82 kg
To be used for: Processing wood and plastics

Ceramic bonded combination oilstones, hardness O/ P. One side coarse for roughing, the other side fine for finishing.
Special Aluminium Oxide 100 grit (coarse) with long working life. Other side precision abrasive, 280/320 grit (fine), very free cutting, high surface quality.
Application:
For deburring, finish smoothing of irregularities, rounding of edges.
74-00694

Very strong and flexible latex paper evenly spread with Silicon Carbide (SiC). Good grit bonding, high abrasion force and long service life.
Sheet size 230×280 mm.
Primarily for rubbing down by hand in bodywork building, repair workshops, and paint shops, for fine rubbing down of varnished or filled areas.
Grinding media: Silicon carbide
Grinding medium code: SiC
Grit: 150
Grit designation: medium
Manufacturer's designation: 911 C

74-00798

The mounting frame with three lasers can be retrofitted easily for the PROS.A. Assembly. The mounting frame has three integrated lasers that are operated via a rechargeable power bank. This means there is no need to spend time setting up external lasers. The lasers can be flexibly mounted and easily positioned.

- Using an adjustment plate, the lasers can be returned to their home position at any time
- The lasers produce practical vertical lines, which you can use e.g. to precisely align transfemoral prostheses
- Detailed alignment recommendations and aids simplify the prosthetic alignment

Dimensions WxDxH: 707 x 521 x 464 mm
Weight: 14.8 kg
To be used for: 3 laser lines [1 frontal plumb line and 2 sagittal plumb lines]
Scope of delivery: Mounting frame with 3 lasers including holder, 1 power bank including USB cable, Schuko mains adapter and holder, main switch, 743Y689 gauge for laser alignment, mounting material, markings as mounting aid
For: Mounting frame for 743A220 PROS.A. Assembly and 743A200 PROS.A. Assembly [old model]
Type of Planning and Equipment: Laser Technology and Alignment Apparatuses

Accessories for 758Z116=1750 Lamination workstation
2x roll holder for subsequent installation in bench-top cabinet