• Raw material
  • Chemical components
  • Buckles, Straps, Rivets
  • Transfer paper
  • PVA Bags & Rolls
Register to see prices 0.0 USD
Lai-Porellina, 0.8mm x 50m x 11cm
Artificial leather, embossed, readily processable, very good wearing confort, no staining, not sensitive to light
Register to see prices 0.0 USD
Register to see prices 0.0 USD
Soft Copacryl resin, 4.9kg
Acrylic resin is very fluid, allowing, in combination with COPACRYL Jersey or COPACRYL Carbon resins, to add flexibility to composite parts.

The Soft resin cannot be used alone and must be incorporated into the Jersey or Carbon resin at a ratio of 10 to 30% to add flexibility to the fabricated device.

The polymerization of this resin occurs at room temperature by adding our SIPACRYL powder hardener, at a maximum ratio of 2% to 3% by weight compared to the amount of resin.

Combining COPACRYL Soft resin with Jersey or Carbon resins yields composite parts with the following characteristics:

Excellent mechanical properties
Very good skin tolerance
Ability to be thermoformed after curing (within the elasticity limits of the reinforcement fabrics used)
Can also be used with our natural reinforcements ORTHOFLAX®, ECO-BLACK, and HYBRIDS.
Register to see prices 0.0 USD
Plastazote perforated 12mm, flesh colour, 1m x 1m
1000x1000x12mm
cell-polyethylene foam
Application:
-for padding of positioning splints and correctional braces (e.g. orthoses)
Characteristics:
-closed-celled expanded PE
-washable
-suitable for processing with Streifylen and Streifycolor
-molding temperature depending on heat source -approx.100-130 °C
-approx. 15-18 Shore A
Register to see prices 0.0 USD
Register to see prices 0.0 USD
Register to see prices 0.0 USD
Cellona skin protection Cream Tube, 100ml
Directions
- Protection cream and skin care in high demand
- in case of contact with aqueous solutions, surfactants, alkaline solutions
- when handling plasters or substances insoluble in water, e.g. oils and lacquers.

Properties
- Oil-in-water emulsion
- pH neutral
- moisturizing
- quick to put on
- has a regulating effect on the water balance and elasticity of the skin
promotes regeneration
- Protects against water, fluids, dirt, chemicals or detergents
Register to see prices 0.0 USD
EVA (PE) foam, 4mm, multicolor
4x1740x960mm
Polyethylene foam material, thermo-moldable at approx. 110-130°C, approx. 30° Shore A
Register to see prices 0.0 USD
3M Multipurpose Spray Glue - 77, 500ml
Product Description
- A high tack, high coverage and fast drying adhesive.
Product Features
• A high tack, high coverage fast drying, transparent adhesive for permanently attaching foils, carpeting, many
lightweight foams, paper, cardboard, felt and cloth to painted or unpainted metals, wood, hardboard and other
base materials.
• It provides high initial "grab" with su􀉣cient open time to allow for positioning of materials.
• Low soak-in gives better looking and higher coverage bonds.
• Soft, non-dimpling glue lines
Register to see prices 0.0 USD
Register to see prices 0.0 USD
Riveting pliers with set of rivets
Hand pop riveter with 50 each aluminium pop rivets D×L: 2.4×5.5 / 3.2×6.3 4.0×6.3 / 4.8×6.0 mm
Comprising a high quality hand pop riveter with lever action and an assortment of 200 aluminium blind rivets, in strong plastic case
Register to see prices 0.0 USD
Pattern Board, A1
Composed of a solid core and two tough outer surfaces.
Self-healing: Exterior surfaces self-repair after cutting.

Gridlines in cm (back) and inches (front). The type designation refers to the size of the print.
Length: 870 mm
Width: 620 mm
Height: 3mm

Register to see prices 0.0 USD
Register to see prices 0.0 USD
Register to see prices 0.0 USD
Register to see prices 0.0 USD
Register to see prices 0.0 USD
Register to see prices 0.0 USD
Register to see prices 0.0 USD
Agglomerated cork 1140x860x10mm
Material:
- EVA cork-scrap sheets

Application:
- for insoles and embeddings
- for shoe last modifications

Characteristics:
- light-weight
- thermoplastic (mouldable at approx. 130 °C)
- high density
- approx. 60 Shore A
- bonds well with contact glues
Register to see prices 0.0 USD
Micro cork (Flexokork), plate, 1000x500x10mm
Material:
- cork-compact sheets

Application:
- for insoles and embeddings
- for height adjustments, shoe last modifications and volume adjustments of prosthetic sockets

Characteristics:
- light-weight
- bendable
- well grindable
- bonds well with contact glues
Register to see prices 0.0 USD
Micro cork (Flexokork), plate, 1000x500x6mm
Material:
- cork-compact sheets

Application:
- for insoles and embeddings
- for height adjustments, shoe last modifications and volume adjustments of prosthetic sockets

Characteristics:
- light-weight
- bendable
- well grindable
- bonds well with contact glues
Register to see prices 0.0 USD
Micro cork (Flexokork), plate, 1000x500x4mm
Material:
- cork-compact sheets

Application:
- for insoles and embeddings
- for height adjustments, shoe last modifications and volume adjustments of prosthetic sockets

Characteristics:
- light-weight
- bendable
- well grindable
- bonds well with contact glues
Register to see prices 0.0 USD
Plastazote non-perforated, skin coloured, 25mm
1000x1000x25mm, 15-18 Shore A
Register to see prices 0.0 USD
Plastazote non-perforated, skin coloured, 20mm
1000x1000x20mm, 15-18 Shore A
Register to see prices 0.0 USD
Plastazote non-perforated, skin coloured, 12mm
1000x1000x12mm, 15-18 Shore A
Register to see prices 0.0 USD
Plastazote non-perforated, white coloured, 12mm
1000x1000x12mm, 15-18 Shore A
Register to see prices 0.0 USD
Plastazote non-perforated, skin coloured, 10mm
1000x1000x3mm, 15-18 Shore A
Register to see prices 0.0 USD
Plastazote non-perforated, skin coloured, 6mm
1000x1000x6mm, 15-18 Shore A
Register to see prices 0.0 USD
Plastazote non-perforated, skin coloured, 5mm
1000x1000x5mm, 15-18 Shore A
Register to see prices 0.0 USD
Plastazote non-perforated 4mm, flesh colour
1000x1000x4mm
cell-polyethylene foam
Application:
-for padding of positioning splints and correctional braces (e.g. orthoses)
Characteristics:
-closed-celled expanded PE
-washable
-suitable for processing with Streifylen and Streifycolor
-molding temperature depending on heat source -approx.100-130 °C
-approx. 15-18 Shore A
Register to see prices 0.0 USD
Plastazote non-perforated, white coloured, 3mm
1000x1000x3mm, 15-18 Shore A
Register to see prices 0.0 USD
Plastazote non-perforated, skin coloured, 3mm
1000x1000x3mm, 15-18 Shore A
Register to see prices 0.0 USD
Register to see prices 0.0 USD
EVA (PE) foam, 3mm, multicolor
3x1740x960mm
Polyethylene foam material, thermo-moldable at approx. 110-130°C, approx. 30° Shore A
Register to see prices 0.0 USD
EVA (PE) foam, 2mm, multicolor
2x1740x960mm
Polyethylene foam material, thermo-moldable at approx. 110-130°C, approx. 30° Shore A
Register to see prices 0.0 USD
EVA foam material, 10mm, black
thermo-moldable at approx. 90 - 130°C., approx. 35° Shore A, 1030x1035x10mm
Register to see prices 0.0 USD
EVA foam material, 2mm, black
thermo-moldable at approx. 90 - 130°C., approx. 35° Shore A, 1030x1035x2mm
Register to see prices 0.0 USD
EVA (PE) foam, 5mm, blue
5x1100x1100mm
Polyethylene foam material, thermo-moldable at approx. 110-130°C, approx. 30° Shore A
Register to see prices 0.0 USD
EVA (PE) foam, 6mm, blue
6x1100x1100mm
Polyethylene foam material, thermo-moldable at approx. 110-130°C, approx. 30° Shore A
Register to see prices 0.0 USD
EVA (PE) foam, 3mm, blue
3x1000x1000mm
Polyethylene foam material, thermo-moldable at approx. 110-130°C, approx. 30° Shore A
Register to see prices 0.0 USD
Polypropylene Copolymer sheet, 6mm, natural color
6x2000x1000mm
Polypropylene copopolymer (PPC), Excellent thermoforming, Chemical and corrosion resistant, thermo-moldable at approx. 165°C, approx. 75° Shore D
Register to see prices 0.0 USD
Register to see prices 0.0 USD
Register to see prices 0.0 USD
Register to see prices 0.0 USD
Plastic acrylic resin (non-toxic), 7.5kg
Plastic acrylic resin (non-toxic), pigment dye. Clean tools with water. High hardness, low shrinkage. Protective varnish for the exterior. Practical working time 20 to 30 min. Setting time 45 to 60 min. Dosage 2 for 1, 100 g / 50 g, variable depending on the application. Consumption 200 to 300 ml per m². Realization of decorative or technical elements by molding, laminating or projection. Interior and exterior decor panel. Application in casting or in lamination with fabric + fiberglass reinforcement. Direct molding on polystyrene / bodywork. Clean use, non-toxic, durable over time, low water permeability. Supplied with: 1 Part B bottle.
Dry milk-white color.
Register to see prices 0.0 USD
Chopart Bonding Kit PE
Content:
Urethane Bonding Component A
Urethane Bonding Component B
Chopart PU, Set Small Parts
V.A. Chopart Sohlen/Bonding Kit
Primer for Chopart Bonding
Register to see prices 0.0 USD
Register to see prices 0.0 USD
Repositionable 3M Spray Adhesive
The 3M spray adhesive is versatile and ideal for the reliable, clean and fast bonding of large areas. It is ideal for optimizing complex production processes and simplifying everyday work in almost all craft and industrial sectors. It is also suitable for everyday use at home. It eliminates the need for brushes, spray guns and other tools. The spray adhesive is free from silicone and chlorinated solvents. The optimal spray distance is 30 cm
Register to see prices 0.0 USD