Drop forged. With close tolerance jaw width.
With oval shaft. Chrome vanadium steel, chrome-plated.

Thick cotton pad with abrasive grain of normal corundum

All faces and edges ground. Inspection test faces ground.
Application: For accurate general workshop work.
Accuracy: DIN 875 / 2 − angle tolerance e.g. for size 100×70 = 0.030 mm.
Standard: DIN 875
Stock length: 600×300mm
Right angle tolerance: 0.08 mm
Shank cross-section: 40×8 mm

Clés dynamométriques à un bras sans vernier de réglage. Réglables par un appareil de contrôle de clé dynamométrique

Robust and handy wooden handle. A solid metal cage prevents the projection of abrasive grains and sparks.
Use
For sharpening or rough dressing of grinding wheels.

6 slotted screwdrivers 2.5 x 75, 3.5 x 100, 4 x 100, 5.5 x 125, 6.5 x 150, 8 x 175 and 2 PH cross-head screwdrivers no. 1 + 2

Width of the jaws: 100mm
Opening of the vice: 100 mm
Height of the jaws: 27 mm
Between axis: 130 mm
Overall dimensions WxDxH: 165x190x57 mm
Weight: 2.7kg

NIMH1434 14.4V

For cutting TF sleeves, sleeves with textile coating

For the final finishing of prosthetic components

For the final finishing of prosthetic components

Bosch Quigo, working area : 10 m

Comfortable multi-component plastic T-handle. Blade made of chrome vanadium steel, chrome-plated.

B12, quick acting, D 1 to 13mm

Body of stainless steel drop forged. Wear-resistant spindle with plastic handle. Cutter wheel for steel pipes of stainless steel, accurately hardened for long tool life. Guide rollers of special steel; chrome-plated.
For clean and right-angled cutting off of pipes.
The external burr is rolled over automatically when cutting. The cut pipe end is immediately ready for thread cutting.
Cutter wheel: ⌀32 mm
Cutter wheel width: 19 mm
Cutter wheel bore: 9 mm
for pipe outer: ⌀1/8 − 2 inch
Number of guide rollers: 2
Number of cutter wheels: 1

Two-edged with cylindrical shank.
Special steel; used for normal drilling in wood, to some extent also in hardwood. The sharp undercut blade ensures tear-free blind holes and at the same time reduces the risk of overheating.
Application: For drilling tear-free and accurate blind holes and through holes.
Standard: DIN 7483 G
Number of drills: 5
Packaging: Wooden case
⌀: 15 mm; 20 mm; 25 mm; 30 mm; 35 mm

Bailey chisel set in premium wooden box, lacquered beech wood handle with brass knuckles, forged blade with bevelled edges made of hardened steel, can be resharpened along the entire length, plastic cap to protect the cut in accordance with DIN 5139
sizes 6, 10, 15, 20, 25 mm

for wood and foam

Handy small spirit level. Die-cast aluminium profile. Face-milled measuring faces. Unbreakable acrylic vials (vertical + horizontal).
Additionally 360° rotating vial. Vee groove and magnet in the measuring face.

for wood and foam

also referenced under: ETOORASP3010

Execution:
Body in anodized aluminum, deburring cone in special hardened steel.
Use:
Professional interior and exterior deburring of stainless steel, steel, copper, plastic and aluminum pipes.
Technical data
For ⌀ tube: 8 mm - 35 mm
Use: Stainless steel; Steel; Copper; Aluminum
Material: Special hardened steel
Housing material: Anodized aluminum

HSS, 25 pieces, D 1 to 13mm by step of 0.5mm

for wood and foam

Total length: 205mm
For conductor cross section: 0.5 mm² - 6 mm²

Execution:
Steel body with reduction system. Exact achievement of the defined crimping forces thanks to the integrated automatic clamping.
Economic model. Lateral introduction of the tips.

Bi-metal hole saw set with popular hole saw diameters. HSS variable tooth pitch for smooth cutting and long service life.
Impact-resistant plastic box with bi-metal hole saws, mounting shanks and centre drills.
Technical Data
Hole saw ⌀: 22; 30; 35; 44; 51; 68 mm
Number of pieces: 10
Number of mounting shafts: 2
Number of centre drills: 2

for attaching decorative fabrics, posters, labels, nonwovens, oiled papers and tar papers, PC8000

for wood, hard foam and soft foam works, medium cut

for wood, hard foam and soft foam works, medium cut

also referenced under: ETOORASP4511, CRM 94.51

2-component holder (up to size 3-20) with pistol handle with exchangeable precision ground punch cutters. For the production of gaskets two punch cutters of different ⌀ are inserted together in the holder.
For punching or manufacturing discs / rings in one operation. For rubber, leather, felt, plastic, cork, fabric or similar materials.
1× each punching tool ⌀: 10 pcs.
size 3; 4; 6; 8; 10; 12; 14; 16; 18; 20
Available combinations of punches inner : outer (mm): 3−10 inner with 12−20 outer
Container length×width×height (mm): Plastic 140×100×40
Use an underlay of wood, leather etc. when punching to avoid damage.
The following combinations are not possible: 20 (inner) with 22 (outer); 30 (inner) with 32 (outer); 40 (inner) with 42 (outer); 50 (inner) with 52 (outer).

Powerful and compact Li-Ion batteries.
No memory effect.
No loss of power.
Low self-discharge.
Fast battery charging.
Also very efficient at temperatures below 0 ° C.
Bosch CoolPack - Optimal protection of cells against overheating thanks to the special heat sink housing under the battery.

for wood and foam

also referenced under: ETOORASP3505, CRM 94.5

for wood and foam

plastic, 6-part,
5 / 10 / 15 / 20 / 25 / 30 mm thick,
size 320 x 150 mm

M16

for wood and foam

also referenced under: ETOORASP3505, CRM 94.5

Compact non-woven discs provide a repeatable finish because the fine abrasive grain is always in contact. No modification of the part geometry, no formation of ridges, long service life.