Max. Length tripod = 900mm
Min. Length tripod = 200mm

High quality malleable cast iron clamping arms; strong prismatic steel slide beam, knurled, electro-galvanised. Low friction steel spindle, burnished with trapezoidal thread and movable jaw. Instant (high speed) adjustment, reliable clamping. Up to size 400 with plastic protective cover on the clamping jaw, from size 500 onwards without protective cover.
Standard: DIN 5117
Cross section of the slide rail: 35×11 mm
Throat: 120 mm
Jaw capacity: 800 mm

L-form shaft; ball point can be applied up to an angle of 30°.
PB Swiss Tools special steel combining maximum hardness with exceptional toughness. Surface nickel-plated and chrome-plated, edges slightly chamfered.
Content:
1 each L-wrench: Size 1.5; 2; 2.5; 3; 4; 5; 6; 8
Presented in: Plastic clip

TINA knives for the highest demands.

Finest handmade special knives "made in Germany" for leather and book restoration.

In a special hardening process, a unique quality is achieved that has been appreciated by users for decades.

⌀45 / L=165mm

with straight jaws

with straight jaws

Classic screwdriver set in a high-quality paperboard box

for slotted screws, universal applications
parallel tip, optimum transmisson of force, no cam-out
slim handle, compact and for universal applications
high-quality materials used, impact-resistant and oil/gasoline resistant
special alloy based on spring steel, exceptional elasticity coupled with high grade hardening
laser-marked serial number, lifetime guarantee

with straight jaws

also referenced under: OOMAMARP3000F, CRM 95

made of premium steel, forged, hardened and sharpened, concave ground cutting edge, PVC blade guard, blade length 240mm, blade width 30mm, weight 400g

Very soft foam suitable even for children’s feet, with the best reproduction of contours.
- No crumbling
- Special German quality with great shape retention upon plaster pour
- No dusting even after a long period

for 701P250=* Belt sander
Length: 2,175 mm
Grit: 40
Width: 320 mm
Weight 0.82 kg
To be used for: Processing wood and plastics

Jaws in extruded aluminum. With integrated permanent magnets, for all types of vices, with corresponding jaw width. Exceptional clamping force thanks to the large magnetic surface. Clamping surfaces with smooth fiber coating.
Suitable for:
All vice models.
Jaw width: 100mm

OOMAALIGORTH

with flattened whitish booklet, tungsten-vanadium steel

for leather and fine metal sheets

Ideally equipped to handle virtually any task: High-performance DIY enthusiast set for precise, clean drilling in metal, masonry and wood, as well as high-grade screwdriver bits and nut setters for the most commonly used screw head types. Comes with a universal carpet knife.
Features & Benefits
11 metal drill bits, Ø 1.5-6.5 mm, with titanium nitride coating that excel through their fast drilling progress and particularly long service life (not suitable for use in aluminium).
6 robust carbide-tipped masonry drill bits, Ø 4-10 mm, that impress with their long service life, fast stock removal, low heat development and precision.
5 sharp wood drill bits, Ø 4-10 mm, with centring tip and shoulder cutter for precise, tear-free hole drilling, as well as 2 spade bits diameter 16/22 mm with titanium nitride coating.

11 HSS-TiN metal drill bits, Ø 1.5-6.5 mm
6 masonry drill bits, Ø 4-10 mm
5 wood drill bits, Ø 4-10 mm
2 spade bits, Titanium, Ø 16/22 mm
18 screwdriver bits, L=25 mm
PH 1/2/2/3
PZ 1/2/2/3
S 4/6/7
HEX 3/4/5/6
T 15/20/25
3 nutsetters, Ø 7/8/10 mm
1 diameter gauge
1 knife
1 adapter for nut setters
1 universal holder, magnetic
1 countersink

Body drop forged. Jaws chemically blackened, head bright polished. Notched jaws for crimping terminals to DIN 46228.
Plastic coated handles.

Fabric shears with micro toothing and ergonomic 2-component handles. Blades of stainless steel.
Glass fibre, aramides, and many more
Length blade: 85mm
overall length: 200mm

Strong design, fully drop forged from steel. With screw joint and opening spring. Cutter edge hardness 64 HRC. Handles with light PVC coating.
For cutting wire ropes, multi-core cables etc.
Chrome vanadium special steel, oil-hardened.
overall length: 190 mm
for wire ropes/round mild steel bar: ⌀8 mm
for wire ropes (maximum 1600 N/mm2): ⌀5 mm
for round steel bar (maximum 1200 N/mm2): ⌀4 mm

All cutters have 3 teeth, radial relief.
The flutes are rectified in the mass.
Bevelling cutters in economical execution.
Use:
Precision chamfering cutters for making bevels without facets.

150mm

The tapered Torx® HF profile reliably retains all Torx® screws. L-shank; through hardened (hard and tough).
Ideal for starting and tightening Torx® screws where access is difficult.
Material: Chrome vanadium steel, manganese phosphated.
Supplied with table use:
1 each L-wrench in a plastic clip: TX8; TX9; TX10; TX15; TX20; TX25; TX27; TX30; TX40

Closed, pre-stretched line. ≥ M3 with GUN entry on both sides for easy threading and clean chip evacuation in the cutting direction. Entry on 2 nets. Ground and nitrided, rake angle approx. 15 °.
Thread size: M10
Thread Type: M
Side angle: 60 °
Tool type: HSS E
Tolerance class: DIN 13 6g
Cutting direction: straight
Pitch: 1.5mm
⌀ outer: 30mm
Height: 11mm

Vice jaws of extruded aluminium With integrated permanent magnets, suitable for all vices of corresponding jaw width. Unique clamping force due to large magnet area.
Clamping faces smooth.
Suitable for: All vice models.
New version with 50% more gripping power.
Jaw width: 150mm
Type of fastening: Permanent magnet
Type of clamping face: smooth

High quality malleable cast iron clamping arms; strong prismatic steel slide beam, knurled, electro-galvanised. Low friction steel spindle, burnished with trapezoidal thread and movable jaw. Instant (high speed) adjustment, reliable clamping. Up to size 400 with plastic protective cover on the clamping jaw, from size 500 onwards without protective cover.
Standard: DIN 5117
Cross section of the slide rail: 35×11 mm
Throat: 120 mm
Jaw capacity: 500 mm

With sharp drill point, pre-drilling not necessary. Conically increasing cutting edges and radially relief ground circumference for a paring cut. With scale in the flutes. Three drive flats on the shank.
Leaves no burr or chatter marks.
Sheet metal 0.1 − 2 mm, stainless steel 0.1 − 1 mm, non-ferrous metals: 0.1 − 5 mm, plastics up to 10 mm.
Cutter ⌀ Dc: 16 mm - 30.5 mm
Overall length: 71 mm
Shank ⌀: 10 mm
Tool material: HSS

∅10/85mm, 0.5mm thick
To cut:
Steel sheets up to 1mm, plastics, wood, putty, non-ferrous metals

Classic screwdrivers set with wall mount
PH 0; PH 1; PH 2; PH 3
for Phillips screws
precise, true-to-size tips, optimal fit in the screw heads
slim handle, compact and for universal applications
high-quality materials used, impact-resistant and oil/gasoline resistant
special alloy based on spring steel, exceptional elasticity coupled with high grade hardening
laser-marked serial number, lifetime guarantee

also referenced under: OOMAMARP3000J, CRM 99

Strong pressed steel shanks with rotating wheel and lock. With 6 different hollow punches (2.0; 2.5; 3.0; 3.5; 4.0 and 4.5 mm ⌀).
70% less force required due to efficient leverage. Ergonomically shaped plastic grips.
For soft materials such as leather use an underlay to avoid damage when a lot of pressure is applied.
overall length: 250 mm