Large high-contrast digital display. The measuring faces are precision-lapped.
Digital caliper with absolute scale, no zeroing required. Electronics switch off automatically after approx. 5 minutes. Simply move it to switch on.
Glass scale ensures very high accuracy.
The electronics are decoupled from the casing and incorporated directly in the sliding part. The gauging force is transmitted directly to the measurement jaws. This reduces the liability of the caliper to errors and increases the working life.
With sturdy metal casing.

210mm

for attaching decorative fabrics, posters, labels, nonwovens, oiled papers and tar papers, PC8000

Lightweight and durable magnesium metal body with needle bearing and thumbwheel guide rollers. Hand deburrer retractable in the body. With spare rollers.
Advantages):
Automatic hold and tightening on the tube thanks to the quick one-hand QuickLock adjustment.
Quick and precise positioning of the wheel according to different tube diameters.
Use:
Universal for cutting thin-walled stainless steel, copper and aluminum tubes (up to 2 mm thick).
Technical data
For ⌀ ext. pipe: 6mm - 35mm

Hand pop riveter with 50 each aluminium pop rivets D×L: 2.4×5.5 / 3.2×6.3 4.0×6.3 / 4.8×6.0 mm
Comprising a high quality hand pop riveter with lever action and an assortment of 200 aluminium blind rivets, in strong plastic case

240mm

high-quality HSS drill bits for woodworking, have a special geometry and transport even wet wood chips perfectly out of deep holes, ideal for precise and clean holes in European and exotic hardwoods, coated and uncoated chipboard

1 flat, 1 concave, 1 convex

For plastic and metal cutting, 2490 x 6 x 0.65 mm / 14 teeth

Suitable for:
All FEIN Multitools, as well as all other common tools on the market.
Cutting width: 35mm
Content: 5
Material: Wood, plastics

With sharp drill point, pre-drilling not necessary. Conically increasing cutting edges and radially relief ground circumference for a paring cut. With scale in the flutes. Three drive flats on the shank.
Set of 3 conical sheet and tube drills and 1 cutting compound No. 118160 in a case.
Leaves no burr or chatter marks.
Sheet metal 0.1 − 2 mm, stainless steel 0.1 − 1 mm, non-ferrous metals: 0.1 − 5 mm, plastics up to 10 mm.
1x each taper sheet and tube drill: Size 3 -14; 8 − 20; 16 − 30.5

A − Z, & 6 mm

Countersink sets, in a case.
Practical set for assembly and workshop use.
Content table use:
1× each countersink: Size 6; 8; 10; 11.5; 15; 19
Number of countersinks: 6
Countersink tip angle: 90 degrees
Tool material: HSS
Number of cutting edges Z: 3

⌀275, ⌀40, 2.5mm
140 teeth

Professional-quality Goniometer feature clearly marked degree increments and easy-to-read inch and centimeter linear measurements.
Has two 180 degrees scales that read in opposite directions. 14" long. Scales marked in 10 increments. Non-locking friction arm.

Handle with rotating centring cap and quick-spinning zone. Blade of special steel.
For description see No. 664600, 668800, 625770 and 627470.
12 pieces in a textile tool roll. 1 each slot-head screwdriver No. 664600 size 1.5; 1.8; 2; 2.5; 3. 1 each screwdriver for Phillips No. 668800 size 00 and 0. 1 each screwdriver for Torx ® similar to No. 625770 size TX5 and TX6. 1 each hexagon screwdriver No. 627470 size 0.9; 1.5; 2

Swiss precision needle files meet the most stringent requirements in terms of shape and size precision, performance and service life. Waist length = 1/2 file length. Made of special steel for precision files with high wear resistance (65-66 HRC). Precisely designed shapes, special size angles and a large choice of different sizes. High performance.

Stamped steel
Width of the jaws: 40mm

The slideable T-handle is fitted with an end-stop to ensure it does not slide out.
With swivel jointed head (torsion drive 50°, swing drive up to 90°). The swivel angle is secured by an integral spring.
Material: Chrome vanadium steel, chrome-plated.
Drive profile: Hexagon socket
Wrench length: 450 mm
Width across flats: 17 mm
Length of sliding handle: 200 mm

Kraftform handle for easy transmission of the required torque. With Rapidaptor quick-change holder for 1/4 inch bits with C6.3 and E6.3 shank. Sizes 600 and 880 with pistol grip for transmission of higher torques.
The torque can be set using a torque analyser (No. 654300 − 654460) and a 7AF hexagon screwdriver (10AF for size 600) . The torque screwdrivers are factory-set to the most frequently used torque setting.
When the set torque is reached the screwdriver triggers, with clearly audible and perceptible signals. The triggering torque is unrestricted.
maximum torque: 120 cN·m
set torque: 0.3 N·m
Bit socket: D6.3 ; F6.3
Torque range:0.3 N·m - 1.2 N·m
Connection format: bitholder 1/4 tomme
Overall length L: 155 mm
Adjustable trigger value: pre-set

for wood and foam

with round jaws

also referenced under: EHDWSANQCA05, CRM 480

also referenced under: OOMAOWELPR04, CRM 5, 105.432

Handle of sealed beechwood, with leather impact cap. Blade of chrome vanadium steel, through hardened. From size 5.5, through blade with hexagon flats for wrench assistance. Surface bright nickel-plated.
Content table use:
1 each screwdriver No. 660800: Size 3.5; 4.5; 5.5; 7; 9; 10; 12; 14

with round jaws

Execution:
Forged. With tight tolerance openings.
With oval body.
Standard:
DIN 3110 / ISO 3318.
Material (s):
Chrome vanadium steel, chrome plated.
Delivery:
1 open-end wrench each: Ref. 6 × 7; 8 × 9; 10 × 11; 12 × 13; 14 × 15; 16 × 17; 18 × 19; 20 × 22; 21 × 23; 24 × 26; 27 × 32; 30 × 34

with round jaws

230mm

Closed, pre-stretched line. ≥ M3 with GUN entry on both sides for easy threading and clean chip evacuation in the cutting direction. Entry on 2 nets. Ground and nitrided, rake angle approx. 15 °.
Thread size: M12
Thread Type: M
Side angle: 60 °
Tool type: HSS E
Tolerance class: DIN 13 6g
Cutting direction: straight
Pitch: 1.5mm
⌀ outer: 30mm
Height: 11mm

Made of polypropylene - light, robust and shockproof. Resistant to most acids and bases. Padlock closure, 5 handle 5 mm
Volume: 20 l
239x474x190 mm
Weight: 1.9 kg
Number of variable lockers: 6