also referenced under: EHDWSANQCA05, CRM 480

⌀45 / L=165mm

Sheet steel cabinet body with integrated door locking system, interior body with chemical resistant surface.
Shelving for 32 mm pitch shelves.
Ground retention tank (according to StawaR).
With exhaust air connection (NW 75).
With door locking system.
Lockable with a profile half-cylinder, can be integrated into a house lock. Not compatible with the Hoffmann locking system.
With 4 adjustment elements to compensate for slight unevenness in the floor.
2 doors
Correct storage of flammable hazardous products in work rooms.
Standard: DIN EN 14470-1, type test (tested in a fire chamber), 90 minutes fire resistance.
Delivery: Cabinet with 3 shelves, a perforated sheet metal plate and a holding tank on the floor, plastic covering, 1 service booklet.
Colors: Cabinet body and doors in light gray RAL7035 or signal yellow RAL1004, powder-coated.
Note (s): Safety cabinets should be subject, at regular intervals (annually), to appropriate maintenance and verification of their proper functioning by a competent person.
Height adjustment in 32 mm steps
Fire resistance: 90 min
Height: 1,968 mm
Width: 1,196 mm
Depth: 616 mm
Number of shelves: 3
Permissible shelf load: 75 kg
Number of retention basins on the ground: 1
Volume retention tank on the ground: 33 l
Weight: 453 kg

for widening holes, shaping or planing concave surfaces, very ideal for turner work, yellow plastic handle, black hand rest (can be disassembled)

ideal tool for file work, black metal body, sturdy yellow plastic handle

With short strong jaws (round). Smooth jaws.
Jaws chemically blacked, polished head, plastic coated handles.
Standard: DIN ISO 5745
Material: Special tool steel, drop-forged, and oil-hardened.
overall length: 140 mm
Jaw length: 28 mm

The blanks are forged and ground; manufactured with an exact cut of even density and depth using special machines. These non-convex files have tooth profiles appropriate to each grade of file.
With helical cut; convex end.
The quality file for workshop use with long tool life and high removal rate.
Standard: DIN 7261 form F
Diameter: 9.2 mm
Length without tang: 250 mm

The grain, the binder, the abrasion-enhancing additives and the trimming disk reinforcement offer optimal abrasion performance and their service life depends on the different areas of use.
Disc to be deburred for steel and stainless steel with long service life and high abrasion capacity.
Maximum rotation speed: 80 m / s
⌀ bore: 22,23 mm
Max rotation speed: 6 600 min-1
Thickness of disc: 8 mm
⌀ disc: 230 mm

The stable sheet metal construction of the roller cabinet includes an ABS tray and push handle. Drawer unlocked by lifting the drawer.
Placement:
Drawer front height: 60; 60; 60; 120; 120; 120; 180 mm
Supplied with:
Dividing material. 12 divider partitions 410 mm.
Colour:
Two-tone powder-coated. RAL 7035 light grey combined with RAL 7016 anthracite grey.
Drawer/pull-out shelf load capacity: 15 kg
Drawer runner extension (partial/full extension): 75 %
Hoffmann perforated panel grid interval: 9×9 mm
Cylinder lock: modular lock barrel
Height: 1,005 mm
Width: 720 mm
Depth: 450 mm
Drawer usable width: 530 mm
Drawer usable depth: 410 mm
Number of drawers: 7
Weight: 50.3 kg

Hand pop riveter with 50 each aluminium pop rivets D×L: 2.4×5.5 / 3.2×6.3 4.0×6.3 / 4.8×6.0 mm
Comprising a high quality hand pop riveter with lever action and an assortment of 200 aluminium blind rivets, in strong plastic case

with riveting hole, length 680mm

Octagonal shank, bright finished head. Head specially annealed to prevent splintering.
Chrome vanadium air hardened steel, painted surface.
1 each rivet snap setter: Size 2; 3; 4; 5; 6

Octagonal body, uncoated head

Octagonal body, uncoated head

Octagonal body, uncoated head

Octagonal body, uncoated head

Octagonal body, uncoated head. The special treatment of the head prevents splinters

for perforating leather, fabric and plastic, with 6 interchangeable nozzles with a diameter of 2.0 / 2.5 / 3.0 / 3.5 / 4.0 / 5.0 mm, with opening spring and locking system, powder coated for good rust protection, gripper body and nozzles: special tool steel, oil hardened

Bow made of oval, varnished steel tube with clamping lever. Saw blade made of original Swedish steel. With hardened tooth tips. Precision ground and exactly set.
Rip-toothed (HZ) 4 teeth before the raker − always sharp. For all types of wood, particularly green wood.
Tooth profile: Rip-toothed
Blade length: 760 mm
Blade height: 18 mm

for wood and foam

also referenced under: ETOORASP3505, CRM 94.5

for wood and foam

for wood and foam

for wood and foam

also referenced under: ETOORASP3505, CRM 94.5

for wood and foam

for wood and foam

also referenced under: ETOORASP3010

for wood and foam

for wood, hard foam and soft foam works, medium cut

for wood, hard foam and soft foam works, medium cut

for wood, hard foam and soft foam works

Solid semicircular graduated arc with graduation 0 − 180°; reading 1°.
Scale plate non-glare chrome-plated. With clamping nut.

Pure black Chinese bristle, 90 % tops. Metal ferrule, 9. gauge, unpainted wooden handle.

ProfCut handsaws with handy 2-component handle.
GT- toothing (hardened, 3×ground), for dry, hard wood.
TPI: 9
Blade length: 475 mm

With sharp drill point, pre-drilling not necessary. Conically increasing cutting edges and radially relief ground circumference for a paring cut. With scale in the flutes. Three drive flats on the shank.
Set of 3 conical sheet and tube drills and 1 cutting compound No. 118160 in a case.
Leaves no burr or chatter marks.
Sheet metal 0.1 − 2 mm, stainless steel 0.1 − 1 mm, non-ferrous metals: 0.1 − 5 mm, plastics up to 10 mm.
1x each taper sheet and tube drill: Size 3 -14; 8 − 20; 16 − 30.5

With sharp drill point, pre-drilling not necessary. Conically increasing cutting edges and radially relief ground circumference for a paring cut. With scale in the flutes. Three drive flats on the shank.
Leaves no burr or chatter marks.
Sheet metal 0.1 − 2 mm, stainless steel 0.1 − 1 mm, non-ferrous metals: 0.1 − 5 mm, plastics up to 10 mm.
Cutter ⌀ Dc: 16 mm - 30.5 mm
Overall length: 71 mm
Shank ⌀: 10 mm
Tool material: HSS

Light alloy holder (120 mm long) with collet chuck and interchangeable detachable three-square hollow section blade of special tool steel or carbide. Blade can be taken out and reground along its entire length.