• Hammers
  • Abrasive
  • Knives
  • Orthopedic tools
  • Scissors
  • Scewdrivers
  • Pliers
  • Wrenches
  • Files, Rasps
  • Saws
  • Drill bit
  • Measuring tools
Combination pliers FACOM, chrome-plated, Overall length: 180mm
Overall length: 180mm
Piano wire cutting values ​​up to ⌀: 2 mm
Standard: DIN ISO 5746
Material: Chrome vanadium steel
surface: chrome
spark-free: no
EAN/GTIN: 3662424087257
Manufacturer number: 187A.18CPE
Execution:
Chrome vanadium steel, chrome-plated head and joint, with heavy-walled covers on handles. Serrated jaws. Plastic opening spring that reduces fatigue. Induction hardened cuts (approx. 64 HRC), also suitable for piano wire.
Register to see prices 0.0 USD
Heavy-duty end cutter 160 mm
Strong head, laid-on joint. Jaws chemically blacked, polished head, plastic coated handles. Cutting edges induction hardened (approx. 61 HRC).
Standard: DIN ISO 5748
Material: Special tool steel, drop-forged, and oil-hardened.
overall length: 160 mm
Cutting capacity soft wire up to ⌀4 mm
Cutting capacity hard wire up to ⌀2.5 mm
Register to see prices 0.0 USD
Crimping tool for 6mm2 end sleeves
Total length: 205mm
For conductor cross section: 0.5 mm² - 6 mm²

Execution:
Steel body with reduction system. Exact achievement of the defined crimping forces thanks to the integrated automatic clamping.
Economic model. Lateral introduction of the tips.
Register to see prices 0.0 USD
Crimping tool for terminal sleeves
Body drop forged. Jaws chemically blackened, head bright polished. Notched jaws for crimping terminals to DIN 46228.
Plastic coated handles.
Register to see prices 0.0 USD
Register to see prices 0.0 USD
Register to see prices 0.0 USD
Hand vice 120 mm
Forged steel; wide jaws with prism. Reinforced shank with secure hinge guide and enclosed special spring. Spindle with trapezoidal thread and strong butterfly nut.
overall length: 120 mm
Jaw width: 45 mm
Jaw capacity: 22 mm
Register to see prices 0.0 USD
Saw sharpening vise, 150mm
Stamped steel
Width of the jaws: 40mm
Register to see prices 0.0 USD
Register to see prices 0.0 USD
Register to see prices 0.0 USD
Spare spring
Suitable for:
Wire cable cutter
Register to see prices 0.0 USD
Cable cutter 190 mm
Strong design, fully drop forged from steel. With screw joint and opening spring. Cutter edge hardness 64 HRC. Handles with light PVC coating.
For cutting wire ropes, multi-core cables etc.
Chrome vanadium special steel, oil-hardened.
overall length: 190 mm
for wire ropes/round mild steel bar: ⌀8 mm
for wire ropes (maximum 1600 N/mm2): ⌀5 mm
for round steel bar (maximum 1200 N/mm2): ⌀4 mm
Register to see prices 0.0 USD
Universal locking pliers, shape of the oval jaw 115 mm
Serrated jaws and powerful steel spring clamp body. Distance and clamping pressure adjustable via a knurled screw. Nickel plated pliers.
Oval jaw shape
Register to see prices 0.0 USD
Universal locking pliers, shape of the oval jaw 225 mm
Serrated jaws and powerful steel spring clamp body. Distance and clamping pressure adjustable via a knurled screw. Nickel plated pliers.
Oval jaw shape
Register to see prices 0.0 USD
Universal grip wrench, jaw shape double Vee 250 mm
Serrated jaws and sturdy spring steel body. Span and clamping pressure adjustable with a knurled screw. Fully nickel-plated.
Jaw shape double Vee.
For clamping profiled and flat materials. Clamping force up to 10,000 N.
Material: Jaws of chrome vanadium steel, drop forged.
Jaw capacity: 40 mm
overall length: 250 mm
Jaw length: 35 mm
Register to see prices 0.0 USD
Mesh cutting pincers chemically blacked 220 mm
With special slim head and long handles. High strength precision ground cutting edges.
Standard: DIN ISO 9242
Material: Special tool steel, drop-forged, and oil-hardened.
Cutting capability: medium hard wire up to ⌀2.5 mm
overall length: 220 mm
Register to see prices 0.0 USD
Heavy-duty pincers 210 mm
Sturdy model, wear resistant. Jaws chemically blackened, head bright polished.
Standard: DIN ISO 9243
Material: Special tool steel, drop-forged, and oil-hardened.
Surface: chemically blackened, head bright polished
Cutting capability: medium hard wire up to ⌀2 mm
overall length: 210 mm
Register to see prices 0.0 USD
Heavy-duty pincers 180 mm
Sturdy model, wear resistant. Jaws chemically blackened, head bright polished.
Standard: DIN ISO 9243
Material: Special tool steel, drop-forged, and oil-hardened.
Surface: chemically blackened, head bright polished
Cutting capability: medium hard wire up to ⌀2 mm
overall length: 180 mm
Register to see prices 0.0 USD
Tweezers with narrow tips angled, 150 mm, Form 22b N
Inside serrated.
Of special steel, nickel-plated (No. 727520 / 7560 painted black).
Length: 150 mm
Tip characteristics: narrow/angled, inner face serrated
Point form: 22b
Surface of tweezers: nickel-plated
Tip exchangeable: no
Register to see prices 0.0 USD
Register to see prices 0.0 USD
Register to see prices 0.0 USD
Riveting pliers with set of rivets
Hand pop riveter with 50 each aluminium pop rivets D×L: 2.4×5.5 / 3.2×6.3 4.0×6.3 / 4.8×6.0 mm
Comprising a high quality hand pop riveter with lever action and an assortment of 200 aluminium blind rivets, in strong plastic case
Register to see prices 0.0 USD
Eyelet pliers
for leather and fine metal sheets
Register to see prices 0.0 USD
Spare wheel for TubiX® pipe cutters
Replacement wheel with needle bearing and quick-change axle.
Technical data
⌀ wheel 20 mm
Wheel width 6.2 mm
Roll bore 7.8 mm

Register to see prices 0.0 USD
TubiX® pipe cutter, with quick adjustment, 6-35mm
Lightweight and durable magnesium metal body with needle bearing and thumbwheel guide rollers. Hand deburrer retractable in the body. With spare rollers.
Advantages):
Automatic hold and tightening on the tube thanks to the quick one-hand QuickLock adjustment.
Quick and precise positioning of the wheel according to different tube diameters.
Use:
Universal for cutting thin-walled stainless steel, copper and aluminum tubes (up to 2 mm thick).
Technical data
For ⌀ ext. pipe: 6mm - 35mm

Register to see prices 0.0 USD
Pipe cutter with 1 cutter wheel for steel pipes 2 inch
Body of stainless steel drop forged. Wear-resistant spindle with plastic handle. Cutter wheel for steel pipes of stainless steel, accurately hardened for long tool life. Guide rollers of special steel; chrome-plated.
For clean and right-angled cutting off of pipes.
The external burr is rolled over automatically when cutting. The cut pipe end is immediately ready for thread cutting.
Cutter wheel: ⌀32 mm
Cutter wheel width: 19 mm
Cutter wheel bore: 9 mm
for pipe outer: ⌀1/8 − 2 inch
Number of guide rollers: 2
Number of cutter wheels: 1
Register to see prices 0.0 USD
Pointer cutters revolver
Strong pressed steel shanks with rotating wheel and lock. With 6 different hollow punches (⌀ 2.0; 2.5; 3.0; 3.5; 4.0 and 4.5 mm).
Use a soft material, e.g. leather, as an underlay to avoid damage when a lot of pressure is applied.
Register to see prices 0.0 USD
Revolving punch pliers 220mm Knipex
for perforating leather, fabric and plastic, with 6 interchangeable nozzles with a diameter of 2.0 / 2.5 / 3.0 / 3.5 / 4.0 / 5.0 mm, with opening spring and locking system, powder coated for good rust protection, gripper body and nozzles: special tool steel, oil hardened
Register to see prices 0.0 USD
Compound action revolving punch pliers
Strong pressed steel shanks with rotating wheel and lock. With 6 different hollow punches (2.0; 2.5; 3.0; 3.5; 4.0 and 4.5 mm ⌀).
70% less force required due to efficient leverage. Ergonomically shaped plastic grips.
For soft materials such as leather use an underlay to avoid damage when a lot of pressure is applied.
overall length: 250 mm
Register to see prices 0.0 USD
Long round nosed pliers, chrome-plated 160 mm
With long, slim jaws and flush fitting joint.
Pliers chrome-plated, plastic coated handles.
Standard: DIN ISO 5745
Material: Chrome vanadium steel, drop-forged and oil-hardened.
overall length: 160 mm
Jaw length: 41 mm
Register to see prices 0.0 USD
Round nose pliers polished 140 mm
With short strong jaws (round). Smooth jaws.
Jaws chemically blacked, polished head, plastic coated handles.
Standard: DIN ISO 5745
Material: Special tool steel, drop-forged, and oil-hardened.
overall length: 140 mm
Jaw length: 28 mm
Register to see prices 0.0 USD
Long flat nosed pliers, chrome-plated 140 mm
With long, slim jaws and flush fitting joint.
Pliers chrome-plated, plastic coated handles.
Standard: DIN ISO 5745
Material: Chrome vanadium steel, drop-forged and oil-hardened.
Jaw length: 42 mm
overall length: 140 mm
Register to see prices 0.0 USD
Flat nose pliers, polished 160 mm
With short strong jaws (flat). Serrated inside jaws.
Jaws chemically blacked, polished head, plastic coated handles.
Standard: DIN ISO 5745
Material: Special tool steel, drop-forged, and oil-hardened.
Type of jaws: inner face roughened
Jaw design: flat
Jaw length: 30 mm
overall length: 160 mm
Register to see prices 0.0 USD
Heavy-duty diagonal cutting pliers, uncoated 200 mm
Heavy-duty head with additionally induction hardened cutting edges (approx. 64 HRC). Laid-on joint. High cutting performance due to optimum leverage.
Jaws bright finished, plastic coated handles.
For all types of wire (long working life even with hard wire). Heavy duty for the most demanding applications.
Standard: DIN ISO 5749
Material: Chrome vanadium steel, drop-forged and oil-hardened.
Cutting capacity piano wire up to ⌀2,5 mm
Cutting capacity soft wire up to ⌀4,2mm
overall length: 200 mm
Cutting capacity hard wire up to ⌀3 mm
Register to see prices 0.0 USD
Heavy-duty diagonal cutting pliers, uncoated 160 mm
Heavy-duty head with additionally induction hardened cutting edges (approx. 64 HRC). Laid-on joint. High cutting performance due to optimum leverage.
Jaws bright finished, plastic coated handles.
For all types of wire (long working life even with hard wire). Heavy duty for the most demanding applications.
Standard: DIN ISO 5749
Material: Chrome vanadium steel, drop-forged and oil-hardened.
Cutting capacity piano wire up to ⌀2 mm
Cutting capacity soft wire up to ⌀3.4 mm
overall length: 160 mm
Cutting capacity hard wire up to ⌀2.5 mm
Register to see prices 0.0 USD
Half-round nose pliers, straight, uncoated 200 mm
Very long snipe nose jaws. Cutting edges induction hardened (approx. 61 HRC), suitable for hard and soft wire. Serrated inside jaws.
Pliers bright finished, plastic coated handles.
Standard: DIN ISO 5745
Material: Chrome vanadium steel, drop-forged and oil-hardened.
overall length: 200 mm
Jaw length: 73 mm
Jaw design: snipe-nosed, straight
Jaw characteristics: Cutting edges induction hardened (approx. 60 HRC)
Type of jaws: inner face roughened
Handle: plastic coated
Material: Chrome vanadium steel, drop-forged and oil hardened
Surface: bright finish
Register to see prices 0.0 USD
Heavy-duty end cutter 180 mm
Strong head, laid-on joint. Jaws chemically blacked, polished head, plastic coated handles. Cutting edges induction hardened (approx. 61 HRC).
Standard: DIN ISO 5748
Material: Special tool steel, drop-forged, and oil-hardened.
overall length: 180 mm
Cutting capacity soft wire up to ⌀4 mm
Cutting capacity hard wire up to ⌀2.5 mm
Register to see prices 0.0 USD
Heavy-duty end cutter 200 mm
Strong head, laid-on joint. Jaws chemically blacked, polished head, plastic coated handles. Cutting edges induction hardened (approx. 61 HRC).
Standard: DIN ISO 5748
Material: Special tool steel, drop-forged, and oil-hardened.
overall length: 200 mm
Cutting capacity soft wire up to ⌀4 mm
Cutting capacity hard wire up to ⌀2.8 mm
Register to see prices 0.0 USD
Vanadium universal pliers, uncoated 160 mm
Serrated jaws. Cutting edges additionally induction hardened (approx. 64 HRC); suitable even for piano wire.
Jaws bright finished, plastic coated handles.
Standard: DIN ISO 5746
Material: Chrome vanadium steel, drop forged.
overall length: 160 mm
Cutting capacity hard wire up to ⌀: 2 mm
Cutting capacity piano wire up to ⌀: 1.5 mm
Jaw characteristics: inner face serrated
Handle: plastic coated
Manufacturing process: Cutting edges induction hardened (approx. 64 HRC), pliers body drop forged
Material: Chrome vanadium steel
Register to see prices 0.0 USD
Heavy-duty combi pliers, polished 225 mm
Considerable cutting performance with little effort. Serrated jaws. Cutting edges additionally induction hardened (approx. 63 HRC); also suitable for piano wire.
Jaws chemically blacked, polished head, plastic coated handles.
overall length: 225 mm
Cutting capacity hard wire up to ⌀3mm
Cutting capacity piano wire up to ⌀2.5 mm
Register to see prices 0.0 USD
Water pump pliers powder-coated 250mm
Box joint (= double guides). Designed to prevent fingers being trapped. Induction hardened. Notched serrated jaws, adjustable in stepped holes. Multi-position ratchet adjustment.
Red powder-coated, polished jaws and joint.
Standard: DIN ISO 8976
Material: Chrome vanadium steel, drop forged.
overall length: 250 mm
Hexagon across flats: 36 mm
Jaw capacity for pipes: 1.1/2 inch
Register to see prices 0.0 USD