• Electric hand machine
  • Oven, Heating plate
  • Drilling, Milling, Sawing
  • Injection technology
  • Abrasive
  • Vacuum technology
  • Pressurized air system
  • Spare parts for machinery
Swiveling disc sander combined with telescopic belt, 400V
Space requirements WxD: 1400 x 800 mm
Power requirements: 400 V / 50 Hz / 1,27 kW / 1,7 kW
Noise level: 75 dB(A)
Power cord length: 2 m
Weight: 134,000 kg
Calour: lichtgrau (RAL 7035)
Scope of delivery: with 1 Sanding belt (2500 x 50 mm), 1 round grinding plate, 2 m power cord with CEE plug
Sanding belt speed: 15/30 m/sec
Dimension upper part W x D x H: 1000 x 500 x 1622 mm
Description: left side: aluminium plane wheel 350 mm Ø, continuous, inclinable support table, folding down at the side for full use of the grinding surface, extraction connection piece 100 mm Ø to connect to a chip extraction system with a minimum air velocity of 20 m/s right side: belt tensioning arm with closed protection hood, extraction connection piece 100 mm Ø, belt length 2500 mm, belt width 50 mm with round plate, contact wheel, sanding belt
Register to see prices 0.0 USD
Complete finishing with 6 independent motors Model ZETA
MACHINE FEATURES

Milling shaft for soles with adjustable fixed guide
Milling shaft for soles with bayonet coupling
Abrasive shaft with 2 independent belts 1650 x 40 mm
Dual-speed abrasive shaft for the three-phase model
Sandpaper advance in canvas
Low-speed waxing shaft with rotating brushes and pads, 3 colors
Adjustable polishing wheel motor
Internal wheels for easy movement
Automatic suction opening only at the used workstation. OPEN SYSTEM
Integrated LED light on abrasive belts
MACHINE DIMENSIONS

Width: 1350 mm - Depth: 770 mm - Height: 1700 mm - Weight: 450 Kg
Register to see prices 0.0 USD
Multifunctional compact grinding machine M44
CHARACTERISTICS
- Motor shaft 1400rpm
- 35mm abrasive accessories
- Horsehair brush and waxing pad
- Cutter shaft 6000rpm with cutter rule
- Pumice motor
- Internal extractor fan
- Dust recovery system with extractable drawers
- Internal fabric filter with back panels for double filtration

MACHINE DIMENSIONS
- Width 900mm - Depth 600mm - Height 1500mm - Weight 140 Kg

POWER SUPPLY
- Single-phase 230V - 1ph - 50Hz
Register to see prices 0.0 USD
Bench machine PODO MINI
FEATURES
- Complete drive shaft with bayonet connection
- Abrasive ring diameter 100x90mm length 283mm
- Integrated vacuum cleaner and external fabric filter

MACHINE DIMENSIONS
- Width 540mm - Depth 410mm - Height 440mm - Weight 34 Kg

POWER SOURCE
- Single phase 230V - 1ph - 50Hz
Register to see prices 0.0 USD
Bench top socket router machine ORTHO 11S
MACHINE FEATURES
- Horizontal motor with bayonet connection
- T22 pine cone and pad supplied
- Foot switch operation
- Arrangement for connection to a centralized vacuum system
- 60 mm diameter on the side
- Suction channel adjacent to the pad

MACHINE DIMENSIONS
- Width 700mm - Depth 400mm - Height 400mm - Weight 50 Kg

POWER SUPPLY
- Single phase 230V - 1ph - 50Hz with inverter
Register to see prices 0.0 USD
Double bench grinder, ⌀200mm
Heavy, durable industrial design with maintenance-free motor
Housing made of extruded aluminum
Long service life and smooth running due to balanced rotor with quality ball bearings
Spark protection on each grinding wheel reduces flying sparks
Sight glasses made of shatterproof material
Vibration damping rubber feet
Coarse and fine grinding wheel (K36/K80) as standard
Register to see prices 0.0 USD
Filter bag
Filter surface area: 1.92 m²
Material: Felt
Thickness: 0.7 mm
Diameter: 413 mm
Length approx.: 1100 mm
Width/depth approx.: 650 mm
Register to see prices 0.0 USD
Chip bag PVC
1.100x410mm / 0,2mm thickness
Register to see prices 0.0 USD
Belt grinding machine HARDO Caravelle Ortho Solo 115
- Orthopaedic sanding machine
- Enlarged work-space left, without trimmers
- Integrated extraction system with cotton filter
- Suction wall placed back widely
- Removable suction nozzles n Heel breaster on bajonet
- Sanding belts 1× 40×Ø175 + 1×100×Ø100 mm
- Separate belt control
- Suction flap activation controlled by each respective drive
- Sanding wheel on bajonet
- Pneumatic sanding belt tensioning
- Fully automatic filter cleaning
- Additional fine dust filter incl.
- Naumkeag multi-adjustable
- Operation by double push buttons
- Ergonomic HARDO Design
- Colour: light grey RAL 7035
- Electr. specifications: 400V/3Ph/50Hz/3,2kW
- Dimensions: 1150×780×1855 mm (w×d×h)
- Weight: 280 kg
Register to see prices 0.0 USD
Pro-Fit 1000 vario socket router
Dimensions: 865x670x1125-1525mm
Power: 0.75 kW
Voltage: 230V
Amperage: 7A
Register to see prices 0.0 USD
Belt sander
Effective sanding height of 450 mm, pneumatic belt tension, light strip on sanding belt, integrated floor extraction, extraction on sanding belt, continuous speed control, incl. 649G60=2175X320 sanding belt
Electrical connection in V/Hz/kW 1x 230/ 50-60 / 2,2
Dimensions WxDxH 712 x 875 x 1.787 mm
Belt width 320 mm
Belt speed 6 - 16 m/s
Exhaust nozzle Ø 125 mm
Register to see prices 0.0 USD
Pro-Fit 2000 socket router
The Pro-Fit 2000 features a solid steel body for smooth operation, a suction arm with fireproof suction tubing, a suction hood with a quick-change system as well as fastening materials and a safety package. The colour of the tool holder can be individually selected if desired. The standard accent colour is anthracite grey.
Electrical equipment Main safety switch, on/off button for router motor, emergency stop foot switch, 2.5 m power cord with 5x 16 A CEE plug and 5x 16 A CEE socket
Dimensions WxDxH 1,220 x 800 x 1,560 mm
Exhaust nozzle diameter 125 mm
Power cord Power cord with 5x 16 A CEE plug and 5x 16 A CEE socket
Working height 1,000 mm
Space requirements WxD 1,100 x 1,300 mm
Equipment Steel machine body, 5/8" milling shaft thread, adapter from 5/8" to M16 thread, suction hood, short and long shaft protector, exhaust nozzle for external suction system, tool set for changing the socket router cutters, tool holder
RPM milling motor one speed 3,000 rpm
Electrical connection in V/Hz/kW 3 x 400 / 50–60 / 2.2
Colour light grey [RAL 7035]
Accent colour anthracite grey [RAL 7016]
Router shaft length 395 mm
Weight 115  kg
Height adjustment No
Sound intensity level 68 dB[A]
Chip suction Connection to a central chip extraction system with a minimum air velocity of 20 m/s [exhaust nozzle diameter 125 mm]
Register to see prices 0.0 USD
Belt grinding machine Caravelle Ortho Solo 75
With integrated extraction system and pumice motor.
Heel front cone with bayonet lock, front cone Ø 90mm.
One sanding belt 40 mm, contact wheel Ø 175 mm,
belt length 1650 mm, one sanding belt 100 mm,
contact wheel Ø 100 mm, belt length 1480 mm,
suction wall diagonally recessed (orthopaedics version),
extraction capacity 1300 cubic meter /h.
Coarse and fine dust boxes removable from the front.

Dimensions WxDxH: 720 x 780 x 1550 mm
Power requirements: 400 V / 50 Hz / 2,1 kW

with cam switch and thermo-protected drive motors,
2 m power cord with CEE plug
Register to see prices 0.0 USD
Connection kit for 3 machines
Including; 10m aspirator flexible hose, 1x reduction, 20x clamp, 3x T-connector, 5x straight connector, 9x wall clamp, 3x butterfly valve, 1x silicone sealant cartridge, 1x silicone gun, 1x rubber tape

Register to see prices 0.0 USD
Belt grinding machine, width=75mm
Length approx: 1070 mm
Width/depth approx: 340 mm
Height approx: 950 mm
Weight approx: 72 kg
Supply voltage: 230 V
Mains frequency: 50 Hz
Extraction duct nominal width outside: 2 x 100 mm
Emissions sound pressure level at workstation Lp (idling without extraction unit): 87 dB(A)
Max. sanding width: 75 mm
Sanding belt length: 2000 mm
Sanding belt width: 75 mm
Circumferential belt speed(s): 29 m/s
Contact wheel diameter: 200 mm
Register to see prices 0.0 USD
Register to see prices 0.0 USD
T2002 bench top milling machine
fixedly mounted on a trapezoidal steel plate,
for mounting on a workbench or the like,
multi-stage height adjustment of the milling axis,
powerful motor with 2 turning speeds,
electromagnetic motor brake,
removable axle guard
400V / 50Hz / 2,7-3,4 kW
Register to see prices 0.0 USD
Bench and Grinder Drum
Robust and stable universal grinding machines with abrasive belt and grinding wheel for a wide range of materials
Heavy, durable industrial design with maintenance-free motor
Housing made of extruded aluminum
Large, heavy mounting flanges and thus high disc concentricity
Sanding attachment with graphite coating; prevents friction and heat
Stop allows quick and easy sanding of workpieces
Tape adjustment without tools - only adjustable with a handle screw
Universal corundum grinding wheel and sanding belt in the standard scope of delivery
Register to see prices 0.0 USD
Base for bench-top drum grinder and abrasive belt
Dimensions (LxWxH): 320 x 270 x 825 mm
Weight (net): approx. 14.5 kg
Register to see prices 0.0 USD
Dust collector, eco model
Chip collection volume: 110 l
Extraction duct inlet outside nominal width: 203 mm
Extraction duct outlet outside nominal width: 1 x 100, 1 x 120 mm
Length approx.: 1000 mm
Width/depth approx.: 500 mm
Height approx.: 2100 mm
Weight approx.: 39 kg
Idle Speed: 2950 min¯¹
Motor input: 1.5 kW
Supply voltage: 230 V
Mains frequency: 50 Hz
Filter surface area: 1.92 m²
Max. sound pressure level: 85.7 dB(A)
Rated volume flow: 1900 m³/h
Max. negative pressure: 1700 Pa
Register to see prices 0.0 USD
Dust aspirator SRF K-10 without connecting kit
230V/1100W/7.5A, 570-890 m3/h, dimensions 1200/600/H1'380mm

also referenced under: OOMADUSTAS01, CRM 107
Register to see prices 0.0 USD
Dust and fume aspirator
Length approx: 705 mm
Width/depth approx: 655 mm
Height approx: 900 mm
Weight approx: 71 kg
Drive motor output 1.1 kW
Supply voltage: 230 V
Mains frequency: 50 Hz
Max. extraction performance: 950 m³/h
Extraction arm type: Hose design
Filtering process: 3-stage
Area approx: 13 m²
Sound pressure level: 72 dB(A)
Register to see prices 0.0 USD
Socket router machine
380V, 2200W, 3000rpm
with dust collector
Register to see prices 0.0 USD
Dust blowing kit
Comprising : 1 blower, 120W, 1 electrical relay, housing, 2m electrical cable, pipe D 75mm/2m, 1 pipe collar D 75mm, 1 blowing nozzle, 1 nozzle holding bar L 880mm, 1 sheet metal collector, 1 flange D 100mm for aspirator connection

also referenced under: OOMADUSTAS01A, CRM 84.5
Register to see prices 0.0 USD
Abrasive belt sander, 2 speeds, conical long shaft
Swinging honing machine with funnel-type milling machine
All models we offer-ensure the highest efficiency, versatility and safety
All the models can be fitted with suction device
Weight: 100 Kg
Headphones mandatory (according to DIN EN 352)

380V, 1.2 - 1.7kW / 1400 - 2800 rpm

also referenced under: OOMAMARP3000, CRM 85
Register to see prices 0.0 USD
Wide abrasive belt sander, without tool kit
380V / 2.2 - 3kW / 1400 - 2800 rpm

also referenced under: OOMAMARPLB25, CRM 84.2
Register to see prices 0.0 USD
Beltsander with 2 sanding belt, 2 speeds, 2500 x 50mm
Sander with two telescopic booms on rubber contact rollers.
Power supply: 400 Volt
Belt: 50 x 2500 mm
Weight: 140 kg
Headphones mandatory (according to DIN EN 352)

400W / 1.27kW

also referenced under: OOMAMARPDB01, CRM 91
Register to see prices 0.0 USD
Socket router machine ORTHO 22, 220V
220V, 2.5kW
2800 tr/min
110x60x150cm, 140kg

- Horizontal motor with 75x200mm abrasive pad
- M16 thread and T22 abrasive pinecone at the top of the shaft
- Foot switch operation
- Predisposition for connection to a centralized suction system
- diameter 150mm on the side
- Suction mouth behind the adjustable pad
Register to see prices 0.0 USD
Socket router machine
380V, 1.25kW / 1.7kW
with dust collector
Register to see prices 0.0 USD
Orbital sander, disk diam. 350mm + long axis
380V, 1.27 - 1.7kW

also referenced under: OOMAMARPOL3500, CRM 89
Register to see prices 0.0 USD
Bench top socket router machine
Designed for Orthopedics workshops
Manual height adjustment, milling shaft horizontally and vertically
adjustable, continuous speed control, M.16 milling shaft thread, adapter from M.16

Dimension : Out Side W.50—D.50—H.40 cm
Power Supply 220 Volt 50 Hz
Power cord With CEE plug 3 × 16 A and CEE socket 3× 16 A
Sound intensity level 80 dB(A)
Electrical connection 220 V 50 Hz 1500 Watt
Motor RPM Variable rotation speed, min. 0 to max. 3000 RPM
Connecting cable 3x2,5 mm2 3 mt
Router shaft length and Type 500 mm 30 to 35 mm ( Conic 220 mm )
Suction head hose 100 mm plastic ,flexible
Scope of delivery Exhaust arm with suction hood (Ø 100 mm +hose )
Color Rall 7035 & 7045
Weight Net 42 Kg
Register to see prices 0.0 USD