• Electric hand machine
  • Oven, Heating plate
  • Drilling, Milling, Sawing
  • Injection technology
  • Abrasive
  • Vacuum technology
  • Pressurized air system
  • Spare parts for machinery
Airbrush Fabric Hose 1/8" & 1/4" Internal Thread 3m
Suitable for all airbrush devices with 1/8" connection to 1/4" connection.
Characteristics
Connections: 12 / 9 mm (1/4 | 1/8 inch) IG
Diameter (internal): 4 mm
Hose: diameter: Ø 4mm (inside)
Ø 7mm (outside)
Hose: Type: Pond Hose
Register to see prices 0.0 USD
Wiltec oil-free vacuum diaphragm pump 128-135 l / min AS29
This pump is designed according to the requirements of the air conditioning systems and enables a professional evacuation of the cold air conditioning circuit.

Due to its outstanding technical characteristics and the robust design, the vacuum pump can also be used for the air-conditioning in your car.

Because of the repeated daily service work and the related cold starts, it is important for the air-conditioning technology that the vacuum pumps are reliable.

• For the mobile use for evacuating refrigeration and air conditioning circuits
• For universal use with refrigerant recovery machines and installation aids
• For evacuating the air conditioning systems from cars and commercial vehicles
• As replacement for air conditioning service units
• Ergonomic handle for the easy and safe transportation of the vacuum pump
• For minimizing the noise the vacuum pump is equipped with rubber feet
• Switch on and off directly at the vacuum pump
• oil-free and therefore maintenance free / no oil mist

Connections: 12.91 mm / 1/4 inch
Dimensions: 415x365x285mm
85x65x105mm
Debit (l/h): 8100 LITERS
Noise level db(A): ≤ 55
Cable length: 1.9 m
Vacuum: 600mm Hg
Register to see prices 0.0 USD
Vacuum unit, Vacumat type 340
- vacuum unit for the manufacturing of thin-walled cast resin laminates and thermoplastic deep-drawing works

Features:
- 2 separate, electronically infinitely adjustable vacuum units with pressure gauge
- 4 connections for resin lamination
- 2 connections for deep drawing
- 2 connections for external units
- hose connection, inside Ø 6 mm
- 1,5 m power cord with grounded plug

Technical Data:
- dimensions W x D x H: 425 x 385 x 220 mm
- suction capacity: 25 l/min, approx. 80 % vacuum
- Power requirements: 220 – 230 V / 50 Hz / 1 Ph / 0.14 kW
- Special voltages upon request.
- Weight: 18 kg
Register to see prices 0.0 USD
Lamination workstation, 1750mm
The lamination bench consists of a frame with a storage surface (grid tray), a work surface for gluing work, a vacuum control box, vacuum points and clamping devices for exhaust tubes. The bench-top cabinet firmly connected to the lamination bench includes a storage surface (grid tray), a roll holder for stockinette materials, suction slots on both sides and a connection for an external fan to extract vapours.

Dimensions WxDxH: 1,750 x 650 x 750/1,750mm
Version: 3 pc. 704G11 clamping device
Diameter of exhaust nozzle for vapour extraction: 180mm
Weight: 135,1kg
Vapour extraction volume flow: Recommended 850 m³/h
Register to see prices 0.0 USD
Lamination workstation for decentralised vacuum system
Dimensions WxDxH: 1.500 x 700 x 970/1.970 mm
Volume flow: Recommended: 550 m³/h
Weight: 235,5 kg
Material: Steel/wood
Exhaust nozzle Ø: 180 mm
Scope of delivery: Connection to a vacuum system, e.g. 755E600=* vacuum system, workbench with cabinet and shelves, bench-top cabinet with roll storage and suction slots, 758Z145=10 cutting and gluing worktop with edge suction, 2 x 704G11 clamping fixture for suction pipes "Orthofix"
Register to see prices 0.0 USD
Mobile vacuum pump with tank, 40m3/h
400V, 1.2kW, volume 40m³ / h, 25L tank
Register to see prices 0.0 USD
Register to see prices 0.0 USD
Register to see prices 0.0 USD
Vacupress 620S3 - UNILOCK
Type: VACUPRESS 620 S3 UNILOCK - COOL-TEC - Vacuum-Press for the orthopaedic
shoe technique / O&P field
Footprint: approx. . 0,34 qm / Bench-top version
Dimensions: H: 1050mm - W: 750mm - D: 590mm
Power supply: 400V / 50Hz / 3 Phase / other available
Capacity: 5,9 KW
Heating: 5400 W Infrared Quartz, reflector, 9 elements
Heating-time: Adjustable from 30-199 sec.,
2 LED Displays / Set-time + Remaining-time
Vacuum-pump 0,45 Kw 12 m³/h, two-stage - oil- and maintenance-free / motor protectionswitch
Airfilter: cartridge-type, high capacity
Frame dimensions: 450mm x 600 mm / vertical lift, working area raised on material level
Frame guide: 16 ball bearing, running in steel rails
Vacuum cavity: W: 140mm L: 190mm D: 190mm / integrated in working area,
standard
Frame locking: Main handle, located on the right hand side
UNILOCK mechanism: patented one handle material clamping system, self-adjusting from 0,5 up to 8,0 mm material thickness.
Activation grill: lateral moveable, ball bearing guided, additionally rotateable to th etop
(180°), vertical adjustable.
Illumination: 2 x 35W / 12V Halogen spotlight
Vacuum automatic: Standard - vacuum pump starts automatically when working frame is closed, shuts off when vacuum is reached Vacuum pressure is controlled during moulding process.
Heating automatic: Standard - The Infrared-Heating elements are controlled by an electronic
timer and shut off automatically when pre-set heating time is reached.
COOL-TEC Cooling System: Standard - Integrated cooling-system to decrease cooling period of vacuummoulded materials by use of special air jets. External compressed air supply required. Pressure is internally reduced to 1,5 bar.
Colour: structural effect paint, blue / light grey RAL 5017/7035
Register to see prices 0.0 USD
Vacumat Plus type 262 vacuum unit
- for cast resin and deep-drawing processes, with two separate vacuum systems, electronically controlled with digital display, vacuum pressure continuously adjustable, with 1.5 m power cord
- 6 connections for lamination 2 connections for deep-drawing 2 connections for external units, e.g. additional tank
- 25 L/min
- 200 mbar
- 230V, 50Hz, 0.14kW
- 425x385x220mm
- 20kg
Register to see prices 0.0 USD
Vacupress 520 GK/1 DUAL
Vacuum-press for pairwise manufacturing of insoles and foot-orthotics. With vaccum pump

Type: Vacuum-press , Bench-top version for use with external vacuum-supply
Frame Dim. (LxW): 520 x 350mm, gas-shock supported, frame tension adjustable
(equipped with Soft-bladder)
Vacuum-Pump: Rotary vane, oil- and maintenance-free, 6 m/h / 200mbar, vacuum-automatic controlled
Power supply: 230V / 50Hz
W 360 x D 650 x H 250 mm W 360 x D 650 x H 250 mm
Weight: 30 kgs
Register to see prices 0.0 USD
Vacupress 520 GK/2
Vacuum-press for manufacturing of insoles and foot-orthotics. With vacuum pump

Type: Vacuum-press , Bench-top version for use with external vacuum-supply
Frame Dim. (LxW): 520 x 350mm, gas-shock supported, frame tension adjustable (equipped with Soft-bladder)
Vacuum-Pump: Rotary vane, oil- and maintenance-free, 6 m/h / 200mbar, vacuum-automatic controlled
Power supply: 230V / 50Hz
W 360 x D 650 x H 250 mm
Weight 30 kgs
Register to see prices 0.0 USD
Vacuum forming workstation
Dimensions WxDxH: 600 x 600 x 990 mm
Material: Steel
Vacuum connection: 13mm
Weight: 45 kg
Colour: Light grey (RAL 7035)
Scope of delivery: 704B1=140 vice, 704G11 clamping fixture "Orthofix" for exhaust tubes, 755X221 vacuum pipe with exchangeable vacuum forming plate (diameter 360 mm), ball valve, 4m hose, mounting materials for bolting to the floor
Optional accessories: 704Y30 Floor plate - Steel, galvanised, 800 x 800 x 10 mm
755X181 Foot pedal for vacuum control
Register to see prices 0.0 USD
Vacuum forming workstation with integrated pump
The vacuum forming workstation with integrated pump combines several functions: The system can be used for the vacuum forming and draping of plastics around the plaster model. Thanks to the compact design of the vacuum pump, which is already integrated, this workstation is particularly suitable for smaller workshops.

Dimensions WxDxH: 1000x450x1100mm
Version: Single version (vacuum pipe top and on the side)
Register to see prices 0.0 USD
Deep drawing frame, 4x
4 vacuum forming workstations with connection to a vacuum system, e.g. 755E80=* Mobile vacuum pump with tank, tank integrated in the frame, water trap, 1x shelf with grate, 1x replaceable HPME shelf for cutting and gluing, vacuum pipe holder tilts 90°, foot pedals to control the vacuum, vacuum pipes, recommended vacuum forming output 10m³ per workstation
2500x750x750mm
Register to see prices 0.0 USD
Register to see prices 0.0 USD
Vacupress 520 GK/1
Vacuum-press for manufacturing of insoles and foot-orthotics. Without vacuum pump

Type: Vacuum-press , Bench-top version for use with external vacuum-supply
Frame Dim. (LxW): 520 x 350mm, gas-shock supported, frame tension adjustable (equipped with Soft-bladder)
Vacuum-Pump: none
Power supply: 230V / 50Hz
W 360 x D 650 x H 250 mm
Weight 21 kgs
Register to see prices 0.0 USD
Vacupress 520 GK/2 DUAL
Vacuum-press for pairwise manufacturing of insoles and foot-orthotics. With vaccum pump

Type: Vacuum-press , Bench-top version
Frame Dim. (LxW): 520 x 350mm, gas-shock supported, frame tension adjustable
(equipped with Soft-bladder)
Vacuum-Pump: Rotary vane, oil- and maintenance-free, 6 m/h / 200mbar, vacuum-automatic controlled
Power supply: 230V / 50Hz
W 360 x D 650 x H 250 mm W 360 x D 650 x H 250 mm
Weight: 30 kgs
Register to see prices 0.0 USD
Lamination jig (tube) with 100mm disk
incl. mounting bar for workbench assembly
Register to see prices 0.0 USD
Register to see prices 0.0 USD
Register to see prices 0.0 USD
Vacuum forming tool kit
Blister-forming Set for BK and AK prostetic socket production. The set includes a Blister-forming tray with two plates (D=320mm and D=265mm) and a vacuum-table with fitting silicone-rings and assembly material.
Register to see prices 0.0 USD
Lamination jig (tube) with 130mm disk
incl. mounting bar for workbench assembly
Register to see prices 0.0 USD
Laminating device TLV6-II
Compact unit to provide vacuum for two Lamination work-places (4 separate inlets) +
1 direct-connection for vacuum supply, with integr. vacuum-pump + Vacuum-tank / 6m³/h / -0,8bar
Type: Laminating device TLV6-II
Vacuum-Pump: 6 m3/h / oil- and maintenance-free / end-vacuum 200mbar
Inlet / connections: 4x 8mm, separately switchable, 1x DIN coupling for vacuum supply etc.
Filter: dust-filter, per inlet
Vacuum automatic: standard
Power supply: 230V / 50Hz
Dimensions: W 435 x D 390 x H 240 mm
Weight: 22 kgs
Register to see prices 0.0 USD
Vacuum-Pump 528 LC
230V, Volume 6, m³/h, Vacuum 60mbar
Register to see prices 0.0 USD
Vacuum-Pump TLV 40-HV II
400V, 1.2kW, volume 40m³ / h, 25L tank
Register to see prices 0.0 USD
Vacuum-Pump TLV25 HV-II
400V, 1.2kW, volume 25m³ / h, 25L tank
Register to see prices 0.0 USD
Connectors kit for vacuum pump
includes: ball valve, flexible hose connector, flexible hose (25m), flexible hose collar, pipe cross coupling, pipe plug, pipe double connector, teflon sealing tape
Register to see prices 0.0 USD
Enveloping suction tube, big
Cone diameters: ⌀104 / ⌀154

also referenced under: OOMAVAPUCR101, CRM 57, CR 8900
Register to see prices 0.0 USD
Enveloping suction tube, medium
Cone diameters: ⌀84 / ⌀129

also referenced under: OOMAVAPUCR102, CRM 58, CR 8910
Register to see prices 0.0 USD
Enveloping suction tube, small
Cone diameters: ⌀48.3 / ⌀88.9

also referenced under: OOMAVAPUCR103, CRM 59
Register to see prices 0.0 USD
Vacuum pump
with connection kit 121 W 312 and 2 enveloping tubes (adult 121 W 001.L + child medium 121 W 001.M), 220 Volts/750W, 0.85 to -0.1 mbar

also referenced under: OOMAVAPUCR10, CRM 56, CR 1000
Register to see prices 0.0 USD