• Raw material
  • Chemical components
  • PVA Bags & Rolls
  • Buckles, Straps, Rivets
  • Transfer paper
Pedilin Cone, ∅425, ∅270, L=420, 5mm
For years, Pedilin® has been successfully employed in the production of liners.

The material is skin-friendly, retains its shape and is hygienic. These prefabricated cones have a precise, stable bonding edge. Ready for thermoplastic shaping, Pedilin® cones save sanding and gluing time.

Prefabricated cones made of Pedilin for fabricating liners
Three different circumferences available
Precise and stable bonded edge
Ready to thermoform immediately
Saves gluing and sanding work
Good shape retention
Hygenic
Washable
Temperature recommendation: 130 degrees C / 266 degrees F (convection oven)
Register to see prices 0.0 USD
Pedilin Cone, ∅390, ∅200, L=420, 5mm
For years, Pedilin® has been successfully employed in the production of liners.

The material is skin-friendly, retains its shape and is hygienic. These prefabricated cones have a precise, stable bonding edge. Ready for thermoplastic shaping, Pedilin® cones save sanding and gluing time.

Prefabricated cones made of Pedilin for fabricating liners
Three different circumferences available
Precise and stable bonded edge
Ready to thermoform immediately
Saves gluing and sanding work
Good shape retention
Hygenic
Washable
Temperature recommendation: 130 degrees C / 266 degrees F (convection oven)
Register to see prices 0.0 USD
KEASY sleeve ∅210x500x6,5mm
This type of liners ensures comfort and protection in a rigid laminated or thermoformed socket for patients with low activity level or for first fitting.
We recommend to wear a sock, a sleeve or a jersey as an interface between the skin and the KEASY liner.
Register to see prices 0.0 USD
KEASY sleeve ∅195x510x6,5mm
This type of liners ensures comfort and protection in a rigid laminated or thermoformed socket for patients with low activity level or for first fitting.
We recommend to wear a sock, a sleeve or a jersey as an interface between the skin and the KEASY liner.
Register to see prices 0.0 USD
KEASY sleeve ∅180x500x6,5mm
This type of liners ensures comfort and protection in a rigid laminated or thermoformed socket for patients with low activity level or for first fitting.
We recommend to wear a sock, a sleeve or a jersey as an interface between the skin and the KEASY liner.
Register to see prices 0.0 USD
Register to see prices 0.0 USD
Register to see prices 0.0 USD
Register to see prices 0.0 USD
Register to see prices 0.0 USD
Register to see prices 0.0 USD
Register to see prices 0.0 USD
Hardener for foam, ASTI-B
Hardener for pedilen foam
Register to see prices 0.0 USD
Rigid foam, ASTI-OP 100
Light rigid foam
- expansion factor: approx. 5.0
- density: approx. 100kg/m³
- limited mechanical strength
Register to see prices 0.0 USD
Register to see prices 0.0 USD
Register to see prices 0.0 USD
Register to see prices 0.0 USD
Register to see prices 0.0 USD
Register to see prices 0.0 USD
Loop with plastic roller buckle, 35mm, white, 100pcs
With plastic roller and plastic attachment plate
Prevents the loops from twisting
Register to see prices 0.0 USD
Loop with plastic roller buckle, 50mm, white, 100pcs
With plastic roller and plastic attachment plate
Prevents the loops from twisting
Register to see prices 0.0 USD
PET-G sheet, 400x400mm, transparent
400x400mm
Glycolized Polyethylene Terephthalate (PET-G)
Register to see prices 0.0 USD
Plastic basin
Dimensions WxDxH 33 1/8 x 22 7/8 x 16 1/8 inch
Register to see prices 0.0 USD
Movable Mirror
Version Mirror, mobiler
Equipment With rear panel, chrome plated frame, tilting
Dimensions WxH 52 x 144 cm
Overall height 165 cm
Register to see prices 0.0 USD
Cast resin Dacron felt
3x2000x930mm
Register to see prices 0.0 USD
Register to see prices 0.0 USD
Register to see prices 0.0 USD
Register to see prices 0.0 USD
Rigid foam, ASTI-OP 300
Light rigid foam
- expansion factor: approx. 5.0
- density: approx. 300kg/m³
- limited mechanical strength
Register to see prices 0.0 USD
Turbocast, for finger and wrist splints, 3.2x600x900, blue
Can be shaped easily.
Can be worked with hot water or with a heat gun.
Perfectly matches the patient's shapes.
Good weldability.
Lightweight and resistant.
Can be used on a model or directly on the patient who has been previously protected with Jersey.
> For finger and wrist splints
Register to see prices 0.0 USD
Turbocast, for finger and wrist splints, 3.2x600x900, beige
Can be shaped easily.
Can be worked with hot water or with a heat gun.
Perfectly matches the patient's shapes.
Good weldability.
Lightweight and resistant.
Can be used on a model or directly on the patient who has been previously protected with Jersey.
> For finger and wrist splints
Register to see prices 0.0 USD
Turbocast, for finger and wrist splints, 2x600x440, blue
Set of 3 sheets
Can be shaped easily.
Can be worked with hot water or with a heat gun.
Perfectly matches the patient's shapes.
Good weldability.
Lightweight and resistant.
Can be used on a model or directly on the patient who has been previously protected with Jersey.
> For finger and wrist splints
Register to see prices 0.0 USD
Single layer 3D fabric waterproof, 3x1000x1450mm, raspberry
Stretchable, breathable, comfortable 3D fabric
Waterproof thanks to the associated flexible film
Very comfortable and soft to the touch
Ideal for making covers with waterproof areas.
Easy to clean, washable at 30°C/86°F without spinning
Register to see prices 0.0 USD
Single layer 3D fabric waterproof, 3x1000x1450mm, blue
Stretchable, breathable, comfortable 3D fabric
Waterproof thanks to the associated flexible film
Very comfortable and soft to the touch
Ideal for making covers with waterproof areas.
Easy to clean, washable at 30°C/86°F without spinning
Register to see prices 0.0 USD
Thermoformable 3D Fabric, 6x1000x1450mm, green
Its texture allows it to breathe and to drain perspiration.
Very comfortable and soft to the touch
Easy to clean, washable at 40°C / 100°F.
Good ageing
Glue-less, this fabric complies with sustainable development policies and limits risks of allergy
Thermoformable at 170°C / 340°F.
Register to see prices 0.0 USD
Thermoformable 3D Fabric, 6x1000x1450mm, blue
Its texture allows it to breathe and to drain perspiration.
Very comfortable and soft to the touch
Easy to clean, washable at 40°C / 100°F.
Good ageing
Glue-less, this fabric complies with sustainable development policies and limits risks of allergy
Thermoformable at 170°C / 340°F.
Register to see prices 0.0 USD
Register to see prices 0.0 USD
Contouring instrument 7-9mm
with straight jaws
Register to see prices 0.0 USD
Contouring instrument 4-6mm
with straight jaws
Register to see prices 0.0 USD
Streifyflex® sheet, 1115x900x4mm
permanently elastic thermoforming film, moulding temp: 120-135 °C / 248-275 °F
Register to see prices 0.0 USD
Streifyflex® sheet, 1115x900x2mm, white
permanently elastic thermoforming film, moulding temp: 120-135 °C / 248-275 °F
Register to see prices 0.0 USD
Register to see prices 0.0 USD
Register to see prices 0.0 USD
PE sheet, 5mm, flesh
5x2000x1000mm
Register to see prices 0.0 USD
Polypropylene Copolymer sheet, 3mm, natural color
3x2000x1000mm
Polypropylene copopolymer (PPC), Excellent thermoforming, Chemical and corrosion resistant, thermo-moldable at approx. 165°C, approx. 75° Shore D
Register to see prices 0.0 USD
Polypropylen Copolymer sheet, 4mm, nature
4x2000x1000mm
Polypropylene copopolymer (PPC), Excellent thermoforming, Chemical and corrosion resistant, thermo-moldable at approx. 165°C, approx. 75° Shore D
Register to see prices 0.0 USD
Register to see prices 0.0 USD
PVA prosthetic release film roll, 1000x0.08mmx22.8m
For stratification
1m x 22.5m x 80 microns
Register to see prices 0.0 USD
Register to see prices 0.0 USD
Register to see prices 0.0 USD
KEASY sleeve ∅130x500x6,5mm
This type of liners ensures comfort and protection in a rigid laminated or thermoformed socket for patients with low activity level or for first fitting.
We recommend to wear a sock, a sleeve or a jersey as an interface between the skin and the KEASY liner.
Register to see prices 0.0 USD