1 flat, 1 concave, 1 convex

Fully hardened and tempered. Blade uniformly through hardened; can be repeatedly reground without re-hardening. Head specially annealed to prevent splintering. Special quality, i.e. highest possible tip hardness (approx. 59 HRC) with exceptional toughness.
Chrome vanadium special alloy. Surface chrome-plated.

Fully hardened and tempered. Blade uniformly through hardened; can be repeatedly reground without re-hardening. Head specially annealed to prevent splintering. Special quality, i.e. highest possible tip hardness (approx. 59 HRC) with exceptional toughness.
Chrome vanadium special alloy. Surface chrome-plated.

Presentation in: Steel case
Length: 445 mm
Width: 187mm
Height: 51 mm
Number of rooms: 23
Hex key openings range: 10-34 mm
Drive profile: Hex socket wrench
Drive square: 1/2 inch

Narrow shape with profiled body in double T (chrome). 22 ° jaw position. Forged and hardened. With graduation on the jaws.
Maximum opening: 34mm
Total length: 300mm

Vice jaws of extruded aluminium With integrated permanent magnets, suitable for all vices of corresponding jaw width. Unique clamping force due to large magnet area.
Clamping faces smooth.
Suitable for: All vice models.
New version with 50% more gripping power.
Jaw width: 100 mm
Type of fastening: Permanent magnet
Type of clamping face: smooth

Mixer for paints and coatings. Mixer with hexagon profile for clamping in a mandrel.
Up to 20 kg, 10 mm hexagon

220V power supply. Dimensions: 45 x 40.5 x 16 cm
Based on the prince of light transmission for optical fiber, the assembly of the platform was developed by the equal and sees the image reflected on the interior mirror support. The quality of the bending and contact rendering allows you to obtain precise diagnoses. Very robust (15 mm thick acrylic glass), this podoscope also has a modern and elegant design

Casings and doors made of 0.9 mm sheet steel, shelves can be accommodated in steps of 40 mm. Reinforced doors internally and lockable by a sliding handle with cylinder lock. Complete with 4 shelves in galvanized sheet metal.
RAL 7035 light gray body, RAL 7016 anthracite doors, powder coated.
Cylinder lock
Allowable load interior cabinet body: 500 kg
Permissible shelf load / Maximum load per rack distributed over the surface (on the metal): 80 kg
Width: 950mm
Depth: 430mm
Height: 1950 mm

Ideal for storing plaster molds and models
Allowable shelf load: 150 kg
Number of shelves: 5
Dimensions: 1060x536x2000mm
Total maximum load: 1300 kg

Voltage tester, Cap square 150X100mm, Straight carbide tracing point, Steel rulers 300mm, Calipers 150mm, Measuring tapes: 2,5 meters, Laser meter, Bubble levels, Plastic folding rule, Lid tray , Plastic transport box

with flattened whitish booklet, tungsten-vanadium steel

Ergonomically shaped T-handle with easy-grip Santoprene® surface and an impact resistant plastic core. Blade of chrome vanadium special steel. Surface chrome-plated.
Impact resistant plastic T-handle. Blade of special vanadium steel, surface matt chrome-plated.

Ergonomically shaped T-handle with easy-grip Santoprene® surface and an impact resistant plastic core. Blade of chrome vanadium special steel. Surface chrome-plated.
Impact resistant plastic T-handle. Blade of special vanadium steel, surface matt chrome-plated.

Ergonomically shaped T-handle with easy-grip Santoprene® surface and an impact resistant plastic core. Blade of chrome vanadium special steel. Surface chrome-plated.
Impact resistant plastic T-handle. Blade of special vanadium steel, surface matt chrome-plated.

Material of blade: HSS
Number of blades: 1
Blade length: 75 mm
Blade width: 3.2 mm

Light alloy holder (120 mm long) with collet chuck and interchangeable detachable three-square hollow section blade of special tool steel or carbide. Blade can be taken out and reground along its entire length.

Ergonomically shaped T-handle with easy-grip Haptoprene® surface and an impact-resistant plastic core. Blade of chrome vanadium special steel. Surface nickel-plated and chrome-plated. Size 4 − 10 with side drive.

Ergonomically shaped T-handle with easy-grip Haptoprene® surface and an impact-resistant plastic core. Blade of chrome vanadium special steel. Surface nickel-plated and chrome-plated. Size 4 − 10 with side drive.

Ergonomically shaped T-handle with easy-grip Haptoprene® surface and an impact-resistant plastic core. Blade of chrome vanadium special steel. Surface nickel-plated and chrome-plated. Size 4 − 10 with side drive.

Ergonomically shaped T-handle with easy-grip Haptoprene® surface and an impact-resistant plastic core. Blade of chrome vanadium special steel. Surface nickel-plated and chrome-plated. Size 4 − 10 with side drive.

Ergonomically shaped T-handle with easy-grip Haptoprene® surface and an impact-resistant plastic core. Blade of chrome vanadium special steel. Surface nickel-plated and chrome-plated. Size 4 − 10 with side drive.

Ergonomically shaped T-handle with easy-grip Haptoprene® surface and an impact-resistant plastic core. Blade of chrome vanadium special steel. Surface nickel-plated and chrome-plated. Size 4 − 10 with side drive.

Ergonomically shaped T-handle with easy-grip Haptoprene® surface and an impact-resistant plastic core. Blade of chrome vanadium special steel. Surface nickel-plated and chrome-plated. Size 4 − 10 with side drive.

Ergonomically shaped T-handle with easy-grip Haptoprene® surface and an impact-resistant plastic core. Blade of chrome vanadium special steel. Surface nickel-plated and chrome-plated. Size 4 − 10 with side drive.

Straight hexagonal shank with ball point.
Kraftform handle made of impact-resistant plastic with integral soft zones. Blade of high quality tool steel, surface matt chrome-plated, black tips.

Straight hexagonal shank with ball point.
Kraftform handle made of impact-resistant plastic with integral soft zones. Blade of high quality tool steel, surface matt chrome-plated, black tips.

Straight hexagonal shank with ball point.
Kraftform handle made of impact-resistant plastic with integral soft zones. Blade of high quality tool steel, surface matt chrome-plated, black tips.

Straight hexagonal shank with ball point.
Kraftform handle made of impact-resistant plastic with integral soft zones. Blade of high quality tool steel, surface matt chrome-plated, black tips.

Straight hexagonal shank with ball point.
Kraftform handle made of impact-resistant plastic with integral soft zones. Blade of high quality tool steel, surface matt chrome-plated, black tips.

Straight hexagonal shank with ball point.
Kraftform handle made of impact-resistant plastic with integral soft zones. Blade of high quality tool steel, surface matt chrome-plated, black tips.

The tapered Torx® HF profile reliably retains all Torx® screws. L-shank; through hardened (hard and tough).
Ideal for starting and tightening Torx® screws where access is difficult.
Material: Chrome vanadium steel, manganese phosphated.
Supplied with table use:
1 each L-wrench in a plastic clip: TX8; TX9; TX10; TX15; TX20; TX25; TX27; TX30; TX40

Ergonomically shaped T-handle with easy-grip Haptoprene® surface and an impact-resistant plastic core. Blade of chrome vanadium special steel. Chrome-plated, black tips. Size TX20 − TX40 with side drive.

Ergonomically shaped T-handle with easy-grip Haptoprene® surface and an impact-resistant plastic core. Blade of chrome vanadium special steel. Chrome-plated, black tips. Size TX20 − TX40 with side drive.

Two cross-head profiles of different sizes, with 90° offset blades. Vanadium-molybdenum steel. Handle made of high quality impact resistant plastic.

Multi-component power grip. Blade of chrome vanadium steel, surface chrome-plated. Chrom-Top tips for optimum rust protection.
overall length: 82 mm
Blade length: 25 mm
for screw ⌀: 2.1 − 3 mm
Cross-head size: 1

Multimatized handle with grip zone optimized for torque and comfort

Multimatized handle with grip zone optimized for torque and comfort

with straight jaws

with straight jaws

with straight jaws

High quality malleable cast iron clamping arms; strong prismatic steel slide beam, knurled, electro-galvanised. Low friction steel spindle, burnished with trapezoidal thread and movable jaw. Instant (high speed) adjustment, reliable clamping. Up to size 400 with plastic protective cover on the clamping jaw, from size 500 onwards without protective cover.
Standard: DIN 5117
Cross section of the slide rail: 35×11 mm
Throat: 120 mm
Jaw capacity: 500 mm

Octagonal body, uncoated head

Octagonal body, uncoated head