130°

Mobility degree : 2
Proximal connection : Pyramid adapter
Distal connection : Tube clamp
Knee flexion angle : 140°
System height : 42mm
Maximum body weight : 55kg

Max 125kg

Lock 7H08A is intended for use in tibia (including for the manufacture of sockets according to express prosthetics technology) and femur prosthesis.
The principle of locking is the same as for the lock 7H 05A. Consists of an insert with a hemisphere and an area under 4 holes (installed on plaster positive before lamination or thermoforming) and the lock case (installed during assembly of the prosthesis on the outside of the socket). In the distal part of the lock there are holes for mounting adapter - 7H01K, 7H02K, or 7H03K. Complete with 8 steel screws, plastic cone and screw for locking an insert on the positive.
Activity level: М1, М2, М3, М4
Maximum weight of patient: 125kg
Material: Aluminum alloy
Maximum weight of patient: 125kg
Weight 175g

5x2000x1000mm

3x2000x1000mm
Polypropylene copopolymer (PPC), Excellent thermoforming, Chemical and corrosion resistant, thermo-moldable at approx. 165°C, approx. 75° Shore D

4x2000x1000mm
Polypropylene copopolymer (PPC), Excellent thermoforming, Chemical and corrosion resistant, thermo-moldable at approx. 165°C, approx. 75° Shore D

Create casts for immobilization of limbs after fractures, operations and orthopedic corrections

Create casts for immobilization of limbs after fractures, operations and orthopedic corrections

Create casts for immobilization of limbs after fractures, operations and orthopedic corrections

Create casts for immobilization of limbs after fractures, operations and orthopedic corrections

also referenced under: OOMAMARP3000C, CRM 92

also referenced under: OOMAMARP3000O, CRM 92.2

also referenced under: OOMAMARP3000N, CRM 92.1

OPLAPOLYRCH04
74-01081

Chrome vanadium steel, through hardened (toughened), surface manganese phosphated.
L-form shaft; ball point can be applied up to an angle of 30°.
Stored in: Plastic clip
1 each L-wrench: Size 1.5; 2; 2.5; 3; 4; 5; 6; 8; 10 mm
74-01202

EMEALEVEL400
74-00683

For stratification
1m x 22.5m x 80 microns

Coating of a modified acrylic adhesive, resistant to light and aging. The adhesive is highly resistant to plasticizers and features a high initial adhesive strength and good shear resistance. Applications include mounting signs, nameplates, reinforcing doors in the automotive industry, attaching plastic bags, continuous paper and poster mounting, and joining paper and film rolls.

1 straight and 1 angled point; nylon handle. Point hardness 48 - 55 HRC.
overall length: 230 mm
Type of product: Steel scriber
74-01748

This type of liners ensures comfort and protection in a rigid laminated or thermoformed socket for patients with low activity level or for first fitting.
We recommend to wear a sock, a sleeve or a jersey as an interface between the skin and the KEASY liner.

50 cm

∅11 to 17mm

Versatile application possibilities
Two-stage gear ratio
Tool holder MK 2
Safety electronics in 24 Volt version
EMC filter class C1
Drilling and milling head can be tilted by ± 90 ° on both sides, thus drilling and milling in angular position as required
Height-adjustable and large-dimensioned protective screen with microswitch
Accurate delivery through positionable scale rings on all handwheels
Simple and clear operating unit with on-off switch, potentiometer and emergency stop impact switch
Infinitely variable speed from 100 to 3,000 min-1
High concentricity measured by tapered roller bearing better than 0.015 mm in quill
Stable column with dovetail guide via wedge bars adjustable on all 3 axes
Game in the feed spindle adjustable and adjustable
Column laterally displaceable for extended application
Massive cross table with T-slots and coolant channel as well as adjustable end stops
Integrated longitudinal scale in the cross table
All travel paths can be read on scales
Clean milling pattern by individually clamped guides
Inexpensive and stable in value

also referenced under: OPTImill BF 16Vario

exercise bag made of PVC canvas - with suspension ring

• Bobath therapy treatment table
• Fire-retardant padding and covering class 1IM,
washable
• Safe working load 160 kg
• dimensions 200 x 200 x 50 h cm

Length=430mm

Length=100mm

Used to ensure connection between ankle and foot
Length from joint
center=166mm

Length from joint
center=40.5mm