Create casts for immobilization of limbs after fractures, operations and orthopedic corrections

high-quality masking tape for painters, plasterers and bodywork painters, up to 80°C, well-impregnated reinforcement or very good resistance to re-sanding, also ideal for dispersion paints

Octagonal body, uncoated head

100% coton

Octagonal body, uncoated head

These collars are made of soft foam with 100% hypoallergenic stockinet, providing containment and heat.C1 C2 For a better comfort, this collar is open to let the air circulate and is height adjustable to ensure perfect stability of the neck. Indications : Minor neck pains, rehabilitation after low injuries, arthrosis, degenerative changes.
Available in size: S, M, L

Stainless Steel

Upholstery made of steel wires

1 straight and 1 angled point; nylon handle. Point hardness 48 - 55 HRC.
overall length: 230 mm
Type of product: Steel scriber

Multimatized handle with grip zone optimized for torque and comfort

Boîtier en plastique avec clip-ceinture amovible. Rembobinage automatique amorti et blocage du ruban. Crochet terminal mobile, CRM 391

Single piece, i.e. shank and tip of one piece. Shanks for direct fitting in electric screwdrivers.
Application:
For hexagon socket head screws DIN 7426.
Standard: DIN ISO 1173
Material: Of PB Swiss Tools special steel combining maximum hardness with exceptional toughness.
Drive profile: Hexagon screwdriver
Hexagon: 6 mm
overall length: 50 mm
Bit hexagon shank: E6.3

Single piece, i.e. shank and tip of one piece. Shanks for direct fitting in electric screwdrivers.
Application:
For hexagon socket head screws DIN 7426.
Standard: DIN ISO 1173
Material: Of PB Swiss Tools special steel combining maximum hardness with exceptional toughness.
Drive profile: Hexagon screwdriver
Hexagon: 5 mm
overall length: 50 mm
Bit hexagon shank: E6.3

Single piece, i.e. shank and tip of one piece. Shanks for direct fitting in electric screwdrivers.
Application:
For hexagon socket head screws DIN 7426.
Standard: DIN ISO 1173
Material: Of PB Swiss Tools special steel combining maximum hardness with exceptional toughness.
Drive profile: Hexagon screwdriver
Hexagon: 4 mm
overall length: 50 mm
Bit hexagon shank: E6.3

Single piece, i.e. shank and tip of one piece. Shanks for direct fitting in electric screwdrivers.
Application:
For hexagon socket head screws DIN 7426.
Standard: DIN ISO 1173
Material: Of PB Swiss Tools special steel combining maximum hardness with exceptional toughness.
Drive profile: Hexagon screwdriver
Hexagon: 3 mm
overall length: 50 mm
Bit hexagon shank: E6.3

Elbow body; optimized lengths. Maximum hardness while being particularly tenacious thanks to the special PB Swiss Tools alloy.
With ball head that can be used obliquely up to an inclination of 30 °. Chrome-plated surface on nickel.

Poignées en acier galvanisé et dévissables. Avec 5 vis de serrage pour fixation de la filière

Elastic paddle in stainless steel strip, flat ovoid wooden handle.

Octagonal body, uncoated head

Octagonal body, uncoated head

85/110mm

also referenced under: OOMAOWELMA08, CRM 17

Tape measure of light quality, for everyday use. Yellow/white ribbon in polyfiber fabric with black graduation on both sides. Metal tip at both ends.
Length: 150cm
Width: 18.5mm

D100mm

also referenced under: OOMADUSTAS04, CRM 107.2

Single piece, i.e. shank and tip of one piece. Shanks for direct fitting in electric screwdrivers.
Application:
For hexagon socket head screws DIN 7426.
Standard: DIN ISO 1173
Material: Of PB Swiss Tools special steel combining maximum hardness with exceptional toughness.
Drive profile: Hexagon screwdriver
Hexagon: 8 mm
overall length: 50 mm
Bit hexagon shank: E6.3

suitable for marking socket contours
easy to wipe off
water soluble

Multimatized handle with grip zone optimized for torque and comfort

Elbow body; optimized lengths. Maximum hardness while being particularly tenacious thanks to the special PB Swiss Tools alloy.
With ball head that can be used obliquely up to an inclination of 30 °. Chrome-plated surface on nickel.

Of stainless spring steel strip.
Clean electrolytically applied black graduations and figures with a smooth surface. Easy to read. Rounded edges to prevent injuries.
Upper and lower edges both with 1 mm graduations.

Elbow body; optimized lengths. Maximum hardness while being particularly tenacious thanks to the special PB Swiss Tools alloy.
With ball head that can be used obliquely up to an inclination of 30 °. Chrome-plated surface on nickel.

Multimatized handle with grip zone optimized for torque and comfort

Unscrewable steel handles. With 5 clamping screws for fixing the die. Up to ref. 65 × 25 in die-cast zinc, from item no. 75 × 20 in steel.
For ⌀ die: 20mm
Height: 5mm
Total length: 175mm

Small model for 15mm and 25mm straps dim : 140m x 50 mm
Large model for 25mm and 38mm straps dim. 140m x 62mm
XXL Model for 38 mm and 49 mm straps dim: 140 x 74 mm

Single piece, i.e. shank and tip of one piece. Shanks for direct fitting in electric screwdrivers.
Application:
For hexagon socket head screws DIN 7426.
Standard: DIN ISO 1173
Material: Of PB Swiss Tools special steel combining maximum hardness with exceptional toughness.
Drive profile: Hexagon screwdriver
Hexagon: 10 mm
overall length: 50 mm
Bit hexagon shank: E6.3

Create casts for immobilization of limbs after fractures, operations and orthopedic corrections

85/110mm

also referenced under: OOMAOWELMA07, CRM 16

100% coton

Stainless Steel

diam. 125mm, 0.5l