Very strong and flexible latex paper evenly spread with Silicon Carbide (SiC). Good grit bonding, high abrasion force and long service life.
Sheet size 230×280 mm.
Primarily for rubbing down by hand in bodywork building, repair workshops, and paint shops, for fine rubbing down of varnished or filled areas.
Grinding media: Silicon carbide
Grinding medium code: SiC
Grit: 150
Grit designation: medium
Manufacturer's designation: 911 C

also referenced under: OOMAVAPUCR10C, CRM 69

resistant to almost all chemicals, non-combustible, embrittled, will not crack, become crumbly or sticky, quick and clean application, for trouble-free sealing of fine threads up to 3/8 inch for almost all fluids, application range from -240 ° C to +260°C

also referenced under: OOMAVAPUCR10T, CRM 68

High performance blades with maximum cutting capacity and long life

for metal, D115mm

Indications:
to relieve and support
Fixation bandages in the treatment of wounds
Properties:
elastic in length (approx. 130%)
textured, fine
with lasting elasticity
breathable
almost wrinkle free
good hold of the ready-to-use dressing
with reinforced edges
Remarks:
washable at 60°C

Stainless Steel

The rod ends are equipped with a safety indicator warning of excessive use of the rods, and thus allow them to be changed and avoid any incident. These models are used for all types of rods with a diameter greater than 18 mm and less than 20 mm.

Tool material: HSS
Type: N
Helix angle: 35-40 °
Shank: Plain shank

Standard core without core taper.
Precision ground point.
Profile ground:
High concentricity and pitch accuracy, drills for series production use.
With point geometry shape C from size 2.4 mm
Coating: TiN

gray, with steel insert

Pale Chinese bristle. White plastic binding, unpainted wooden handle.

Multimatized handle with grip zone optimized for torque and comfort

Drop forged. With close tolerance jaw widths.
With oval shank.

PU coated assembly gloves for precision work in dry working environments. Good tactile sensitivity and high breathability. Particularly suitable for precision handling of small electronic parts, maintenance work, inspection, assembly activities.
Standard: EN 388; EN 420
Base material: Polyamide (Nylon)
Coating: PU

also referenced under: APROGLOVNPU

10 A, DO 1 GL

also referenced under: OOMAOVENCR50F10, CRM 42

Stainless Steel

These models are used for all types of walkers and rollators with a diameter of Ø27 to 30mm

Strong octagonal shank, bright finished point. Uniformly through hardened over the entire length. Head specially annealed to prevent splintering.
Safety tested to DIN 7255.
Material: Chrome vanadium air hardening steel, painted. Head annealed.
overall length: 120 mm
Shank ⌀: 10 mm
Type of striking head: annealed
Material: Chrome vanadium air hardening steel
Surface: painted

Of stainless spring steel strip.
Clean electrolytically applied black graduations and figures with a smooth surface. Easy to read. Rounded edges to prevent injuries.
Upper and lower edges both with 1 mm graduations.

1 straight point; knurled metal handle.
overall length: 180 mm

Create casts for immobilization of limbs after fractures, operations and orthopedic corrections

∅11 to 17mm

also referenced under: EHDWSANDCG05, EHDWSANDCG15, CRM 481, CRM 482

Create casts for immobilization of limbs after fractures, operations and orthopedic corrections

High quality branded alkaline manganese batteries last 2-3 times longer and can be stored twice as long as zinc and carbon batteries.
HOLEX batteries provide long-lasting and reliable power.
Number of batteries included: 4
Chemical composition: Alkaline-manganese
Battery designation: Micro, AAA
International format: LR3
Rated voltage: 1.5V
rechargeable: no

also referenced under: OCPOFOOTZ00166, 2R14

edding 400, round point, line thickness approx. 1 mm.
Application:
For marking on almost all materials, even metal, glass, plastic.
Manufacturer's designation: edding 400
maximum line thickness: 1 mm
Writing colour: black
quick-drying: yes
waterproof: yes
refillable: yes

Of stainless spring steel strip.
Clean electrolytically applied black graduations and figures with a smooth surface. Easy to read. Rounded edges to prevent injuries.
Upper and lower edges both with 1 mm graduations.

Indications:
for partial, surface or circular padding in case of casts, synthetic rigid bandages and splint bandages
Properties:
stays swollen even under the action of humidity thanks to the non-degreased cotton fibers

2 A, DO 1 GL

also referenced under: OOMAOVENCR50F02, CRM 41

Universal cutting disc for steel and INOX, good cutting quality and resistant.
For freehand cutting on electric and pneumatic angle grinders with a maximum cutting speed vc of 80 m / s.
Maximum rotation speed: 80 m / s
⌀ bore: 22,23 mm
⌀ disc: 230 mm
Disc thickness: 2.5 mm
Max rotation speed: 6 600 min-1

100% coton