Made of flat-oval steel, hardened and tempered. Blade uniformly through hardened; can be repeatedly reground without re-hardening. Head specially annealed to prevent splintering.

Unscrewable steel handles. With 5 clamping screws for fixing the die. Up to ref. 65 × 25 in die-cast zinc, from item no. 75 × 20 in steel.
For ⌀ die: 25mm
Height: 9mm
Standard: EN 22568
Total length: 210mm

The blanks are forged and ground; manufactured with an exact cut of even density and depth using special machines. These non-convex files have tooth profiles appropriate to each grade of file.
Cuts on 3 faces; square end.
The quality file for workshop use with long tool life and high removal rate.
Standard: DIN 7261 form A
Length without tang: 200 mm

Multimatized handle with grip zone optimized for torque and comfort,

foam polyester elastic exercise ball
Ø 65 mm

Strong, forged design, special tough varnish; taper section (cutting part) bright metal. Slight internal taper for releasing the cut pieces.

Upholstery made of steel wires

Straight hexagonal shank with ball point.
Kraftform handle made of impact-resistant plastic with integral soft zones. Blade of high quality tool steel, surface matt chrome-plated, black tips.

made of premium steel, with round, curved and plastic-coated shank, flexible blades, polished

made of premium steel, with round, curved and plastic-coated shank, flexible blades, polished

Elbow body; optimized lengths. Maximum hardness while being particularly tenacious thanks to the special PB Swiss Tools alloy.
With ball head that can be used obliquely up to an inclination of 30 °. Chrome-plated surface on nickel.

Disposition of the blades around the axis of the tool

Straight hexagonal shank with ball point.
Kraftform handle made of impact-resistant plastic with integral soft zones. Blade of high quality tool steel, surface matt chrome-plated, black tips.

Center drill with radius type R

also referenced under: OOMAVAPUCR10D, CRM 64

Spare handle for axillary crutch

Multi-component power grip. Blade of chrome vanadium steel, surface chrome-plated. Chrom-Top tips for optimum rust protection.
overall length: 82 mm
Blade length: 25 mm
for screw ⌀: 2.1 − 3 mm
Cross-head size: 1

Spare handle for axillary crutch

Made of tough rubber (90 Shore), non-rebound; with powerful impact. Worn faces can be reworked by turning on a lathe. With ash wood handle.
Head length: 90 mm
Head ⌀: 54 mm
Weight: 300 g
Handle length: 320 mm

Multimatized handle with grip zone optimized for torque and comfort

Hand whisk L 42 cm

Suitable for:
Wire cable cutter

extra strong & tear-proof, does not fuse with hot thermoplasti
well suited for compression and vacuum suction
roll 150 m x 10 cm

also referenced under: OOMAVAPUCR10P, CRM 63

Straight hexagonal shank with ball point.
Kraftform handle made of impact-resistant plastic with integral soft zones. Blade of high quality tool steel, surface matt chrome-plated, black tips.

Bow made of oval, varnished steel tube with clamping lever. Saw blade made of original Swedish steel. With hardened tooth tips. Precision ground and exactly set.
Rip-toothed (HZ) 4 teeth before the raker − always sharp. For all types of wood, particularly green wood.
Tooth profile: Rip-toothed
Blade length: 760 mm
Blade height: 18 mm

100% coton

Ergonomically shaped T-handle with easy-grip Haptoprene® surface and an impact-resistant plastic core. Blade of chrome vanadium special steel. Chrome-plated, black tips. Size TX20 − TX40 with side drive.

also referenced under: OOMAVAPUCR10H, CRM 61

Ergonomically shaped T-handle with easy-grip Haptoprene® surface and an impact-resistant plastic core. Blade of chrome vanadium special steel. Surface nickel-plated and chrome-plated. Size 4 − 10 with side drive.

Made of flat-oval steel, hardened and tempered. Blade uniformly through hardened; can be repeatedly reground without re-hardening. Head specially annealed to prevent splintering.

Forged by stamping. With opening to tight tolerances

Ergonomically shaped T-handle with easy-grip Haptoprene® surface and an impact-resistant plastic core. Blade of chrome vanadium special steel. Surface nickel-plated and chrome-plated. Size 4 − 10 with side drive.

Ergonomically shaped T-handle with easy-grip Haptoprene® surface and an impact-resistant plastic core. Blade of chrome vanadium special steel. Surface nickel-plated and chrome-plated. Size 4 − 10 with side drive.

Internal brushes with galvanised twisted wire core and plain helix of bristles.
Helical brush section of waved steel wire.
Overall length 300 mm, brush section length 100 mm.
Application:
For manual cleaning and deburring of pipes, bores etc.

The black blade ‑ Lutz® multisharp, premium hardened blades with ultra-sharp ground edges.
Extra-fine and ultra-sharp ground blade.
Blade length: 100 mm
Blade width: 18 mm
Blade thickness: 0.5 mm
Number of snap-off points: 8
Number of blades: 10

The Perlon stockings with rubber band are intended for the outer cosmetic finish of modular knee disarticulation prostheses and transfemoral prostheses.

The Perlon Knee Stockings with rubber band are intended for the outer cosmetic finish of modular transtibial prostheses.

1/4"