- Size adjustable, active, four-wheel active wheelchair for semi-urban environments
- Wide casters are shock absorbing for a smoother ride over bumpy terrain
- Intended for use indoors or outdoors
- This wheelchair can be folded to facilitate storage and transportation
- Each chair includes a foam pressure relief cushion, basic tool kit, and tire repair kit
- Active adults, including older adults (over 65 years old), and older children/teenagers who use the wheelchair as their primary method of mobility
- Users without postural support needs

- Rigid frame, tilt-in-space pediatric wheelchair with supportive seating system
- Made in three sizes using one frame and three adjustable seating system size options
- Height and angle adjustable planar backrest and a depth and angle adjustable seat cushion
- Backrest and seat cushions made of firm urethane foam with comfort layer on a metal base. Water resistant fabric covers can be removed easily for washing
- Seat cushion has a length adjustable 20 mm tall pre-seat bone shelf
- Seat to backrest angle is adjustable
- Lateral pelvic and thoracic supports are height, width, and depth adjustable
- Contoured head support with bending ends for better lateral support. Headrest is height, depth, angle, and rotational adjustable
- Rigid steel frame can be grown to three widths: 11″ (28 cm), 12” (30 cm), and 14″ (36 cm)
- Tilt-in-space adjustable range: 0-15° with tools
- Polyurethane front 7.9” x 2” (20 cm x 5 cm) casters
- Standard bicycle wheels with 24” (61 cm) pneumatic tires, quick release axles and wheel locks
- Rear wheels have four positions to adjust the center of gravity
- Height, depth, and angle adjustable footplate made of shock resistance grade polypropylene with heel edge
- Height-adjustable armrests with polyurethane pads
- Calf strap, pelvic strap, and chest harness
- Includes plastic tray table with lock mechanism
- Abductors and anti-tippers available in the Modification Kit
- Certifications: ISO 13485
- Passed ISO 7176

wall model
equipped with 4 arms of 130 cm and 4 arms of 110 cm
non-slip grip
adjustable height and variable resistance
dimensions: 132 x 25 x 200 cm

Powerful all-rounder with high suction power, compact construction, hose storage and accessory holder on the device. Automatic shutdown once the tank is full.
The flat pleated filter allows the water / dust suction to be switched immediately without removing the filter.
The Tact automatic filter cleaning system enables uninterrupted work, reduced maintenance costs and a long filter life.
The central control button allows you to switch from one suction program to the other.
Robust 30 liter tank with bumpers and metal steering casters.
Wet / dry vacuum cleaner with electric price and automatic start for electric tools.
Adhesion resistant PES cartridge filter.
Manufacturer no .: NT22APTE
Power supply: Mains operation
Power consumption: 1'300 W
Container volume: 22 l
Nominal dimensions of fittings: 35 mm
Length: 380mm
Width: 370 mm
Height: 480 mm
Suction hose length: 1.9 m
Cable length: 6 m
Number of Engines: 1
Air volume flow: 71 l / s
Vacuum: 255 mbar
Sound level: 72 dB (A)
Automatic switch-on system: yes
Filter cleaning: ApClean semi-automatic filter cleaning
Dust class - vacuum cleaner: L
Weight: 6.1 kg
Filter systems: Cartridge filter

also referenced under: OOMAOWELHJ02, 107.144

also referenced under: OOMAOWELPR02, CRM 3, 100.303

also referenced under: OOMAOWELPR04, CRM 5, 105.432

Welding mirror with Teflon coating and automatic temperature control. Suitable for indoor and outdoor use.

Diameter: 280mm
Weight: 3.0kg
Power consumption: 900 Watts / 230 Volts 50 Hz
Design: straight
Includes device stand.

also referenced under: OOMAOWELPR28, CRM 7, BARY A-2

230V/500W
High-end quality made in Switzerland

for LEISTER TRIAC

The TRIAC ST from Leister is a handy heat gun, primarily used as a profiling tool for welding and processing plastic membranes. Additionally, it is used for professional welding, shrinking and molding various thermoplastics. The two-sided air filters of the TRIAC ST can be easily removed and cleaned. This ensures an optimal air supply and maximum performance. As a successor of the TRIAC S, the ST combines a new, highly robust engine with current technology and modern design in a handy heat gun.

Compared to the design of other heat guns, the proven bar-style heat gun enables welding above the head, on the floor and in narrow areas. The ergonomic, two-component handle and its optimized center of gravity provide an ideal grip, even for longer periods of use and under difficult conditions. When in use, the actively cooled, protective tube ensures continuous safety by protecting against burns. The carbon brake also protects the heat gun from overloading. The extensive range of accessories with over 80 attachment nozzles practically make this heat gun a universal device. The TRIAC ST is already the seventh generation of Leister’s revolutionary line of TRIAC hot air tools. Decades of experience packaged in a modern design, manufactured with Swiss quality: The TRIAC ST is a robust and reliable tool.

VOLTAGE: 100 - 230 V
FREQUENCY: 60 Hz; 50/60 Hz
POWER: 1500 - 1600 W
TEMPERATURE: 40 - 700 °C
AIR FLOW (20°C): 240 l/min
TEMPERATURE SETTING STEPLESS: Yes
STATIC PRESSURE: 3000 Pa
NOISE EMISSION LEVEL: 67 dB (A)
OUTDOOR USE: Yes
DISPLAY: No
ECO MODE: No
E-DRIVE: No
NOZZLE CONNECTION Ø: 31.5 mm / 1.25 in; M14
LENGTH: 338.0 mm
DEVICE DIAMETER: 90 mm
HANDLE DIAMETER: 56 mm
WEIGHT: 0.99 kg
PLUG: KR, 2 poles, 16A; CN, 2 poles, 10A; EU, 2 poles, 16A; JP, 3 poles, 20A; CEE yellow, 3 poles, 16A; JP, 2 poles, 15A; AU, 3 poles, 10A; UK, 3 poles, 13A; US, 2 poles, 15A, polarized; CH T11, 2 poles, 10A
POWER CABLE LENGTH: 3.0 m
CONFORMITY MARK: CE
SAFETY MARK: KCC; S+; UL
PROTECTION CLASS: II

also referenced under: OOMAOWELAIRT, CRM 1, 141.311

- Closed-loop controlled temperature
- Open loop controlled air volume
- Intelligent «e-Drive» operating unit
- Ergonomic handling
- Modern design/ Swiss made
Power W: 1600
Voltage V~: 230
Temperature °C: 45 - 620
Air volume (20°C) l/min: 160 - 240
Size (L x ∅) mm: 335 × 90
Handle ∅ mm: 56
Weight kg: 1

- 100% Swiss made quality
- 60 years of expertise in making hot-air tools – brought together in the new SOLANO AT
- The sturdy, professional hot-air tool that weighs less than 1 kg/2.18 lbs
- Functional design: two-component handle grip and optimum center of gravity ensure ergonomic working
- Quick clean air filters
- Automatic carbon stop (collector protection) and heating element protection
Voltage V ~: 230
Power W: 2300
Temperature ° C: 500–650
Air quantity (20 ° C) l / min: 240
Dimensions (L × ∅) mm: 270 x 270 x 75 (45)
Weight: 750gr

• 100% Swiss made quality
• Leister's smallest manual device
• Continuous electronic temperature control
• Continuous electronic adjustment of the air flow
• Quiet
• Integrated flexible foot
Voltage V ~: 230
Power W: 460
Temperature ° C: 40-600
Air flow (20 ° C) l / min: 40/110
Dimensions (L × ∅) mm: 235 x 70
Weight: 400gr

also referenced under: OOMAOWELHJ01, CRM 1.0, 100.688

The strong and comfortable wedge cushion is used as a back wedge to elevate the patient.
The wedge cushion promotes a natural and restful position.
Dimensions: 40x30x10cm
Bultex foam 36 kg / m²
Faux leather covering
Interior: Bultex foam

The strong and comfortable wedge cushion is used as a back wedge to elevate the patient.
The wedge cushion promotes a natural and restful position.
Dimensions: 20x20x5cm
Bultex foam 36 kg / m²
Faux leather covering
Interior: Bultex foam

Maximum patient weight: 150kg
Build height: 416mm
Material: titanium
Weight: 341g

Maximum patient weight: 125kg
Build height: 416mm
Material: stainless steel
Weight: 381g

Build height: 5mm
Maximum patient weight: 125kg
Material: Stainless steel
Weight: 84g

SACH Foot 1H02B is designed for waterproof prostheses for unilateral or bilateral transfemoral amputated patients at all levels or transtibial amputation. Can be used in prostheses after disarticulation of the knee or hip. 1H02B Foot has a plastic insert incorporated in the forefoot, which ensures its elasticity and durability. The foot is supplied assembled with foot adapter.
Activity level: M1, M2
Maximum patient weight: 100kg

Polycentric Knee Joint 6Н09В is intended for patients with
low or moderate level activity. The joint is used in hip prosthesis
for transfemoral amputation, including transfemoral
disarticulation.
Maintenance-free needle bearings used on all axes of joint
ensure high reliability and increasing resource of knee joint.
Activity level: М1, М2
Maximum flexion angle: 135°
Maximum weight of patient: 125kg
Material: Aluminium alloy
Weight: 480g

6H30 knee hydraulic joint is intended for patients with weight up to 125 kg unilateral or bilateral transfemoral amputation at any level including disarticulation in the knee joint. The knee joint is recommended for patients with a high level of activity — M3, M4 (without sport load).
The hydraulic knee joint is a monocentric joint with a rotary hydraulic system that controls the swing phase and provides a support in the stance phase due to high flexion resistance.
Walking down stairs and on inclines is effectively supported by the hydraulic system with closely approximating to the physiological gait pattern.
The damping level is controlled by the flexion and extension throttles that provides a comfortable walking experience at a wide range of speeds.
Flexion and extension resistance can be adjusted inde-pendently with ease.
If necessary, the extention assist can be increased by install-ing an additional spring, which is included in the delivery set.
Maximum flexion angle: 150°
Maximum weight of patient: 125kg
Material: Aluminium alloy
Weight: 1000g

Build height: 16mm
Maximum patient weight: 125kg
Material: Stainless steel
Weight: 138g

Build height: 14mm
Maximum patient weight: 125kg
Material: Stainless steel
Weight: 89g

Built height: 10mm
Maximum patient weight: 125kg
Material: Stainless steel
Weight: 92g

Built height: 12mm
Maximum patient weight: 125kg
Material: Stainless steel
Weight: 151g

Built height: 16mm
Maximum patient weight: 125kg
Material: Stainless steel
Weight: 210g

Built height: 26mm
Maximum patient weight: 125kg
Material: Stainless steel
Weight: 210g

Box joint (= double guides). Designed to prevent fingers being trapped. Induction hardened. Notched serrated jaws, adjustable in stepped holes. Multi-position ratchet adjustment.
Red powder-coated, polished jaws and joint.
Standard: DIN ISO 8976
Material: Chrome vanadium steel, drop forged.
overall length: 250 mm
Hexagon across flats: 36 mm
Jaw capacity for pipes: 1.1/2 inch

Stainless Steel

Stainless Steel

Stainless Steel

Stainless Steel

Stainless Steel

5 x 5 cm drawn grid
• steel frame, epoxy coated
• dimensions 100 x 170 h cm

The mirror has a shatterproof film on the back, which reduces the risk of injury if the glass breaks
Can be used horizontally or vertically
Suitable in damp rooms

D100mm

large model for children - height pelvis from 85 to 112 cm - height thorax from 92 to 126 cm - depth: 95 cm - maximal load: 75 kg

Features
safe device for walking rehabilitation with extra support by a panty which supports the patient in case of a fall
adjustable height and depth of the padded pelvic support
the padded adjustable axillar support protects users with insufficient trunk control
easy access thanks to the back opening
castors with independent brakes

very small model for children - height pelvis from 44 to 60 cm - height thorax from 52 to 70 cm - depth: 79 cm - maximal load: 30 kg

Features
safe device for walking rehabilitation with extra support by a panty which supports the patient in case of a fall
adjustable height and depth of the padded pelvic support
the padded adjustable axillar support protects users with insufficient trunk control
easy access thanks to the back opening
castors with independent brakes

2-component holder (up to size 3-20) with pistol handle with exchangeable precision ground punch cutters. For the production of gaskets two punch cutters of different ⌀ are inserted together in the holder.
For punching or manufacturing discs / rings in one operation. For rubber, leather, felt, plastic, cork, fabric or similar materials.
1 each circle cutter ⌀: 55−330 mm
Centring point No. 832140: 1 pc.
1× each punching tool ⌀ No. 832110: 15 pcs.
size 3; 4; 6; 8; 10; 12; 14; 16; 18; 20; 22; 24; 26; 28; 30
Available combinations of punches inner : outer (mm): 3−10 inner with 12−30 outer 12−20 inner with 22−30 outer
Container length×width×height (mm): Plastic 275×205×50
Use an underlay of wood, leather etc. when punching to avoid damage.
The following combinations are not possible: 20 (inner) with 22 (outer); 30 (inner) with 32 (outer); 40 (inner) with 42 (outer); 50 (inner) with 52 (outer).

2-component holder (up to size 3-20) with pistol handle with exchangeable precision ground punch cutters. For the production of gaskets two punch cutters of different ⌀ are inserted together in the holder.
For punching or manufacturing discs / rings in one operation. For rubber, leather, felt, plastic, cork, fabric or similar materials.
1× each punching tool ⌀: 10 pcs.
size 3; 4; 6; 8; 10; 12; 14; 16; 18; 20
Available combinations of punches inner : outer (mm): 3−10 inner with 12−20 outer
Container length×width×height (mm): Plastic 140×100×40
Use an underlay of wood, leather etc. when punching to avoid damage.
The following combinations are not possible: 20 (inner) with 22 (outer); 30 (inner) with 32 (outer); 40 (inner) with 42 (outer); 50 (inner) with 52 (outer).

AVR-5KVA 5KW 5000W Automatic Voltage Stabilizer Mains Current Regulator / TV PC Voltage Regulator Refrigerator.
For home, shopping center, supermarket, schools, industrial and mining companies, research institutes, laboratories and other electrical equipment. AC power supply is ideal for office equipment, industrial equipment, home appliances, medical equipment, test equipment, communication equipment.
Executive standard SB / T 10266
Technical parameters:
- Input voltage range 145 ~ 255v
- The precision output voltage 220v ± 7%
- The protection output voltage of 250v ± 4
- Frequency 50 / 60Hz
- Temperature rise K <75 (full load)
- Efficiency> 90%
- Response time <10ms
- Rated A 22.7 Amps
- Dimensions: 160 X 215 X 295 mm
- Model AVR-5000VA

Heavy-duty, heavy-duty, steel / die-cast construction. Very low vibrations and precise guidance thanks to CNC machined components. Very powerful clamping thanks to the special clamping device. An integrated compressed gas spring ensures that the weight is balanced when adjusting the height of the vice. Locking in any position by means of a safety clamping lever.
The vise can be rotated 360 ° in conjunction with the vertical mover without an additional swivel base to bring a workpiece into the most favorable working position. The safety clearance required by DIN 31001, part 1 (25 mm) is thus observed for all oscillation and movement movements in height.
To adapt the vice to the nearest centimeter to the ideal working height (particularly important for learning and training workshops).
Delivery:
Fixing screws included for bench mounting.
Height adjustment range: 242 mm
Adjustable on a bench table: 93 mm - 335 mm
Weight: 11.2 kg

Compact and silent versatile machine for all-round training - excellent quality - correct bio-mechanic exercise - trains all the important muscle groups: bicepscurl, pectoral fly, shoulder press, latpulley, leg extension, pulley rower
Technical Features
- seat and back adjustable
- 5 x 7 and 5 x 5 heavy frame
- durable 2-color powder-coated
- dimensions: 200 x 177 x 205 cm
- weight stack: 65 kg (13 x 5 kg)