Strong base with lapped standing surface. Reading 0.02 mm with fine adjustment. The scriber is carbide tipped. With adjustable measuring beam, magnifying glass and locking screw.
Metrology: Analogue / Material: Stainless steel, INOX / Surface base, Length: 135 mm / Tracing height: 300 mm / Vernier: 1/50 mm / Calibration: E1 / Base area, width: 90 mm / Rule section: 28 × 9 mm / Allowable error: 0.06 mm

Matte chromed anti-glare reading parts.
Fine graduation, high contrast.
Finely honed measuring surfaces.
Locking screw at the top.
Technical data
All parts: hardened / Depth gauge: flat / Metrology: analog / Locking: Locking screw on top / Thread table: Caliper table / Material: Stainless steel, INOX / Switchable reading: mm - inch / Graduation: 1/20 mm / Graduation: 1/128 inch / Allowable error: 0.05 mm / Standard: DIN 862 / Measuring range: 0 mm - 150 mm / Calibration: A1 / Packing: Case / Reading: 0.05 mm / Spout length: 40 mm

Aluminium

25m

25m

Equipment Connection to an external fan, air curtain, explosion-protected lighting, cabinet
Dimensions WxDxH 1,200 x 750 x 2,200 mm
Air exhaust nozzle Ø 160 mm
Electrical connection in V/Hz/kW 1x 230/ 50/ 0.071
Weight 170 kg
Colour Light grey (RAL 7035)
To be used for Mixing lamination resin, the 758F21 Security storage cabinet can be placed in the cabinet

Serrated jaws. Cutting edges additionally induction hardened (approx. 64 HRC); suitable even for piano wire.
Jaws bright finished, plastic coated handles.
Standard: DIN ISO 5746
Material: Chrome vanadium steel, drop forged.
overall length: 160 mm
Cutting capacity hard wire up to ⌀: 2 mm
Cutting capacity piano wire up to ⌀: 1.5 mm
Jaw characteristics: inner face serrated
Handle: plastic coated
Manufacturing process: Cutting edges induction hardened (approx. 64 HRC), pliers body drop forged
Material: Chrome vanadium steel

400V, 1.2kW, volume 25m³ / h, 25L tank

400V, 1.2kW, volume 40m³ / h, 25L tank

230V, Volume 6, m³/h, Vacuum 60mbar

- vacuum unit for the manufacturing of thin-walled cast resin laminates and thermoplastic deep-drawing works

Features:
- 2 separate, electronically infinitely adjustable vacuum units with pressure gauge
- 4 connections for resin lamination
- 2 connections for deep drawing
- 2 connections for external units
- hose connection, inside Ø 6 mm
- 1,5 m power cord with grounded plug

Technical Data:
- dimensions W x D x H: 425 x 385 x 220 mm
- suction capacity: 25 l/min, approx. 80 % vacuum
- Power requirements: 220 – 230 V / 50 Hz / 1 Ph / 0.14 kW
- Special voltages upon request.
- Weight: 18 kg

with connection kit 121 W 312 and 2 enveloping tubes (adult 121 W 001.L + child medium 121 W 001.M), 220 Volts/750W, 0.85 to -0.1 mbar

also referenced under: OOMAVAPUCR10, CRM 56, CR 1000

also referenced under: OOMAVAPUCR10M, CRM 65

The vacuum forming workstation with integrated pump combines several functions: The system can be used for the vacuum forming and draping of plastics around the plaster model. Thanks to the compact design of the vacuum pump, which is already integrated, this workstation is particularly suitable for smaller workshops.

Dimensions WxDxH: 1000x450x1100mm
Version: Single version (vacuum pipe top and on the side)

Dimensions WxDxH: 600 x 600 x 990 mm
Material: Steel
Vacuum connection: 13mm
Weight: 45 kg
Colour: Light grey (RAL 7035)
Scope of delivery: 704B1=140 vice, 704G11 clamping fixture "Orthofix" for exhaust tubes, 755X221 vacuum pipe with exchangeable vacuum forming plate (diameter 360 mm), ball valve, 4m hose, mounting materials for bolting to the floor
Optional accessories: 704Y30 Floor plate - Steel, galvanised, 800 x 800 x 10 mm
755X181 Foot pedal for vacuum control

Blister-forming Set for BK and AK prostetic socket production. The set includes a Blister-forming tray with two plates (D=320mm and D=265mm) and a vacuum-table with fitting silicone-rings and assembly material.

Filter and manometer included

Type: VACUPRESS 620 S3 UNILOCK - COOL-TEC - Vacuum-Press for the orthopaedic
shoe technique / O&P field
Footprint: approx. . 0,34 qm / Bench-top version
Dimensions: H: 1050mm - W: 750mm - D: 590mm
Power supply: 400V / 50Hz / 3 Phase / other available
Capacity: 5,9 KW
Heating: 5400 W Infrared Quartz, reflector, 9 elements
Heating-time: Adjustable from 30-199 sec.,
2 LED Displays / Set-time + Remaining-time
Vacuum-pump 0,45 Kw 12 m³/h, two-stage - oil- and maintenance-free / motor protectionswitch
Airfilter: cartridge-type, high capacity
Frame dimensions: 450mm x 600 mm / vertical lift, working area raised on material level
Frame guide: 16 ball bearing, running in steel rails
Vacuum cavity: W: 140mm L: 190mm D: 190mm / integrated in working area,
standard
Frame locking: Main handle, located on the right hand side
UNILOCK mechanism: patented one handle material clamping system, self-adjusting from 0,5 up to 8,0 mm material thickness.
Activation grill: lateral moveable, ball bearing guided, additionally rotateable to th etop
(180°), vertical adjustable.
Illumination: 2 x 35W / 12V Halogen spotlight
Vacuum automatic: Standard - vacuum pump starts automatically when working frame is closed, shuts off when vacuum is reached Vacuum pressure is controlled during moulding process.
Heating automatic: Standard - The Infrared-Heating elements are controlled by an electronic
timer and shut off automatically when pre-set heating time is reached.
COOL-TEC Cooling System: Standard - Integrated cooling-system to decrease cooling period of vacuummoulded materials by use of special air jets. External compressed air supply required. Pressure is internally reduced to 1,5 bar.
Colour: structural effect paint, blue / light grey RAL 5017/7035

Vacuum-press for pairwise manufacturing of insoles and foot-orthotics. With vaccum pump

Type: Vacuum-press , Bench-top version
Frame Dim. (LxW): 520 x 350mm, gas-shock supported, frame tension adjustable
(equipped with Soft-bladder)
Vacuum-Pump: Rotary vane, oil- and maintenance-free, 6 m/h / 200mbar, vacuum-automatic controlled
Power supply: 230V / 50Hz
W 360 x D 650 x H 250 mm W 360 x D 650 x H 250 mm
Weight: 30 kgs

Vacuum-press for manufacturing of insoles and foot-orthotics. With vacuum pump

Type: Vacuum-press , Bench-top version for use with external vacuum-supply
Frame Dim. (LxW): 520 x 350mm, gas-shock supported, frame tension adjustable (equipped with Soft-bladder)
Vacuum-Pump: Rotary vane, oil- and maintenance-free, 6 m/h / 200mbar, vacuum-automatic controlled
Power supply: 230V / 50Hz
W 360 x D 650 x H 250 mm
Weight 30 kgs

Vacuum-press for pairwise manufacturing of insoles and foot-orthotics. With vaccum pump

Type: Vacuum-press , Bench-top version for use with external vacuum-supply
Frame Dim. (LxW): 520 x 350mm, gas-shock supported, frame tension adjustable
(equipped with Soft-bladder)
Vacuum-Pump: Rotary vane, oil- and maintenance-free, 6 m/h / 200mbar, vacuum-automatic controlled
Power supply: 230V / 50Hz
W 360 x D 650 x H 250 mm W 360 x D 650 x H 250 mm
Weight: 30 kgs

Vacuum-press for manufacturing of insoles and foot-orthotics. Without vacuum pump

Type: Vacuum-press , Bench-top version for use with external vacuum-supply
Frame Dim. (LxW): 520 x 350mm, gas-shock supported, frame tension adjustable (equipped with Soft-bladder)
Vacuum-Pump: none
Power supply: 230V / 50Hz
W 360 x D 650 x H 250 mm
Weight 21 kgs

- for cast resin and deep-drawing processes, with two separate vacuum systems, electronically controlled with digital display, vacuum pressure continuously adjustable, with 1.5 m power cord
- 6 connections for lamination 2 connections for deep-drawing 2 connections for external units, e.g. additional tank
- 25 L/min
- 200 mbar
- 230V, 50Hz, 0.14kW
- 425x385x220mm
- 20kg

V One knee is controlled by a microprocessor and sensors. In the auto-mode, the flexion resistances of the knee joint will be adjusted automatically depend on user's walking speed and gait patterns. In the manual-mode, manual set for the flexion resistances is also available.

Safety and intelligence
A new gravity sensor is integrated to estimate different walking speeds, and the knee prosthesis resistance can be changed for more natural gait and safety.

Walking resistances setting
The resistances of the knee joint for three walking conditions (slow, natural, fast walking) are set by the PC program in the auto-mode.

Four-bar mechanical design
The trajectory of the instance center of rotation (ICR) mimics anatomic pattern, which ensures stability in the stance phase and toe clearance in the swing phase.

Carbon frame
It makes knee lighter and more durable.

UNIVERSAL WRIST
BRAND: ORTHOPUS
Materials: stainless steel + aluminium
Weight: 93g (with tool holder)
Sizes: Ø53x18 mm
Made in France
NB: TO HAVE A COMPLETE AND FUNCTIONAL WRIST, IT IS NECESSARY TO BE EQUIPPED WITH THE WRIST AND THE TOOL HOLDER (REF 80 P 20.HW) AS ON THE SECOND PICTURE

Adapted to upper-limb amputations including disarticulation of the wrist, this mechanical wrist fits directly into a socket and connects quickly to a large number of tools. The universal wrist is equipped with two levers to connect and disconnect a tool, or to lock (prono-supination) rotation as required.

Upya is THE foot for you, comfortable but dynamic, stable and reassuring, it bends to your life and your desires. Upya is suitable for both tibial and femoral amputees and is also suitable for double amputees. Don't hesitate to contact our sales team if you have any questions, they are always happy to answer them." WEIGHT: 700 grams (+/- 5%)

Degree of mobility: 1-2
Height: 140mm
Material: Aluminum, Reinforced polyethylene, Fiberglass, Polyurethane foam
Size: 25 to 28cm (adaptabe)
Water resistant

Worktop 50 mm thick. Holes are provided for securing drawer units and support legs.
Worktop of beech marine ply, with waterproof glue. Finished with clear UV varnish.
Drawer unit 600 mm wide of sheet metal with cylinder lock with 2 keys and central lock. Drawer of sheet metal with wide aluminium grip handles, can be pulled out 90 %. With slots for drawer dividers on the inner faces. Drawer units can be mounted on the right, left or centre of the worktop. Worktops of 1500 mm can accept 2 − 3 units, worktops of 2000 mm can accept 3 − 4 units (depending on the width of the units).
Support legs of folded sheet metal (80 mm wide), with cross braces.
Rear panels of folded sheet metal, 25 mm deep.
Fitted with:
Drawer front height: 60; 80; 100 mm
Supplied for self-assembly, saving freight costs. Delivered unassembled.
Technical Data
Material thickness 1 mm
Workbench height 850 mm
Drawer/pull-out shelf load capacity 100 kg
Workbench/desk load capacity - maximum distributed load (on wood) 800 kg
Insert thickness 50 mm
Drawer runner extension (partial/full extension) 90 %
Cylinder lock modular barrel
Safety certificate GS TÜV Süd
Series KOMBI workbench
Height 850 mm
Worktop length: 1,500 mm
Worktop depth: 700 mm
Worktop thickness: 50 mm
Drawer body height: 300 mm
Drawer body width: 600 mm
Drawer body depth: 630 mm
Drawer usable width: 490 mm
Drawer usable depth: 520 mm
Number of drawers: 3
Material of worktop: Beech marine ply
Surface worktop: clear varnished

Worktop 50 mm thick. Holes are provided for securing drawer units and support legs.
Worktop of beech marine ply, with waterproof glue. Finished with clear UV varnish.
Drawer unit 600 mm wide of sheet metal with cylinder lock with 2 keys and central lock. Drawer units can be mounted on the right, left or centre of the worktop. Worktops of 1500 mm can accept 2 − 3 units, worktops of 2000 mm can accept 3 − 4 units (depending on the width of the units). Drawers of sheet metal with wide aluminium grip handles. − Can be pulled out 90% − With slots for drawer dividers on the inner faces.
Support legs of folded sheet metal (80 mm wide), with cross braces.
Fitted with:
Drawer front height: 60; 80; 100 mm
Supplied for self-assembly, saving freight costs. Delivered unassembled.
Technical Data
Material thickness 1 mm
Workbench height 850 mm
Drawer/pull-out shelf load capacity 100 kg
Workbench/desk load capacity - maximum distributed load (on wood) 400 kg
Insert thickness 50 mm
Drawer runner extension (partial/full extension) 90 %
Cylinder lock modular barrel
Safety certificate GS TÜV Süd
Series KOMBI workbench
Height: 850mm
Worktop length: 1,500mm
Worktop depth: 700mm
Worktop thickness: 50mm
Drawer body height: 300mm
Drawer body width: 600mm
Drawer body depth: 630mm
Drawer usable width: 490mm
Drawer usable depth: 520mm
Number of drawers: 3
Material of worktop: Beech marine ply
Surface worktop: clear varnished

Workbench in sturdy steel construction. 50 mm wide base with reinforcement. Feet with non-marking plastic glides. With 1 pair of gussets to ensure rigidity. 16G drawer unit with central locking by cylinder lock. Full extension drawers with differential slides and load capacity of 75 kg.
Workbench height: 850 mm
Permissible load of drawers / extendable shelves: 75 kg
Permissible work bench / table load - Maximum load per rack distributed over the surface (on the wood): 400 kg
Worktop thickness: 50 mm
Drawer extraction (partial / total): 100%
Usable drawer surface in G: 12 × 20
Worktop length: 1,500 mm
Worktop depth: 750 mm
Height of drawer unit: 300 mm
Width of drawer unit: 400 mm
Depth of drawer unit: 650 mm
Useful height of drawer unit: 225 mm
Useful width of drawers: 300 mm
Useful depth of drawers: 500 mm
Number of drawers: 2
Weight: 82 kg

Worktop 50 mm thick. Holes are provided for fixing drawers and legs.
Base in sturdy U-shaped steel profile. Drawer unit with 720 mm useful height and central closure. Equipped with 5 drawers (partial extraction).
Worktop in beech plywood, glued, waterproof. With colorless UV varnish.
Drawer units 600 mm wide in sheet steel with cylinder lock with 2 keys and central locking. Sheet steel drawer with large aluminum handle bar, extendable up to 90%. Designed for compartmentalization. The drawer units can be mounted on the right, left or in the center of the worktop. For a plan length of 1500 mm, possibility of mounting 2 - 3 boxes, for a plan length of 2000 mm, possibility of mounting 3 - 4 boxes (depending on the width of the boxes).
Legs in folded sheet steel (80 mm wide), with reinforcements.
Drawer units to be mounted on the right or on the left.
Front height of drawers: 60; 100; 140; 180; 240 mm
Colors: RAL 7035 light gray body and feet, RAL 5005 signal blue drawers, powder-coated. For other paintings, price on request.
Note (s): Delivery by separate elements, more economical. Delivery without assembly.
Established height: 850 mm
Allowable load of drawers / extendable shelves: 100 kg
Established load capacity / table - Maximum load per compartment distributed over the surface (on the wood): 1,000 kg
Worktop thickness: 50 mm
Drawer extraction (partial / total): 90%
Cylinder lock: Modular cylinder
Safety certificate: GS TÜV Süd
Worktop length: 1,500 mm
Worktop depth: 700 mm
Worktop thickness: 50 mm
Drawer cabinet height: 800 mm
Drawer cabinet width: 600 mm
Drawer cabinet depth: 630 mm
Usable width of drawers: 490 mm
Usable depth of drawers: 520 mm
Number of drawers: 5
Worktop material: Multiply beech
Worktop surface: colorless varnish

Worktop 50 mm thick, robust, in beech plywood, water resistant, colorless UV varnish. Support legs of folded sheet metal (80 mm wide), with cross braces.Colors: RAL 7035 light gray tubes, powder coated.
Worktop thickness: 50mm
Established admissible load / table - Maximum load per compartment distributed over the surface (on the wood): 400 kg
Worktop depth: 700 mm
Worktop thickness: 50 mm
Worktop length: 1500 mm
Established height: 850mm

Worktop 30 mm thick, robust, in beech plywood, water resistant, colorless UV varnish. Frame in screwed square tubes (30 × 30 mm), with plastic glides.
Colors: RAL 7035 light gray tubes, powder coated.
Worktop thickness: 30mm
Established admissible load / table - Maximum load per compartment distributed over the surface (on the wood): 250 kg
Worktop depth: 700 mm
Worktop thickness: 30 mm
Worktop length: 1500 mm
Established height: 850mm

Tough industrial soldering irons with Ersadur long−life soldering tips (30 times the working life of conventional copper soldering tips). Warm−up time 3 min. (for size 300, approx. 5 min.). Power cable 1.5 m rubber cable (PVC for size 30). With support stand (not size 30).
Powerful soldering iron for copper cables up to 6 mm2 cross section.
Soldering tip width: 5.3 mm
Heating power: 150 W
Soldering tip temperature after 3 minutes: 450 °C
suitable for copper cross sections up to: 6 mm2

also referenced under: OOMAOWELIE15, CRM 10, 0155JD

Technical Specifications:

Product Type: Soldering Iron
Power Supply: Mains operation
Tip Width: 3.1 mm
Heating Power: 30 W
Tip Temperature after 3 minutes: 380 °C
Suitable for copper sections up to: 2.5 mm²
Weight without power cord: 80 g
Identification and Classification Numbers:

EAN / GTIN: 4003008047004
Manufacturer's Reference: 0330KD
Description:
This industrial soldering iron is designed for exceptional longevity, equipped with Ersadur long-life tips that last 30 times longer than standard copper soldering tips. It heats up in 3 minutes, features a 1.5 m rubber power cable (ref. 30 uses PVC), and comes with a detachable iron stand (not included with ref. 30). The Ersa soldering iron also includes a clip-on iron stand for convenient and safe use.

Serrated jaws and powerful steel spring clamp body. Distance and clamping pressure adjustable via a knurled screw. Nickel plated pliers.
Oval jaw shape

Serrated jaws and powerful steel spring clamp body. Distance and clamping pressure adjustable via a knurled screw. Nickel plated pliers.
Oval jaw shape

Serrated jaws and sturdy spring steel body. Span and clamping pressure adjustable with a knurled screw. Fully nickel-plated.
Jaw shape double Vee.
For clamping profiled and flat materials. Clamping force up to 10,000 N.
Material: Jaws of chrome vanadium steel, drop forged.
Jaw capacity: 40 mm
overall length: 250 mm
Jaw length: 35 mm

Universal, advanced and microprocessor controlled electrotherapy device for professional practice.

Elegant design, intuitive color screen and extremely easy operation.

Preset pathologies and choice menu through the suggested flow forms.

Memory locations for self-adapted programs (e.g. uro program) with identification for later use.

Treatment Modes
a. Low frequency currents: biphasic, Tens, diadynamic (50-100Hz - CP, LP, 50Hz and 100Hz interrupted), rectangular, triangular, exponential, galvanic, iontophoresis, faradic (triangular, rectangular, neodynamic), Träbert, ultra-reiz

b. Interferential currents: IF bipolar, IF quadripolar, IF isoplanar, IF vectorial, MF stimulation, isodynamic, Kotz

Maximum intensity low-frequency currents: 76.5 mA max. with 500 Ohm

Maximum intensity interferential frequency currents: 127 mA max. with 500 Ohm
Frequencies: 2.5 and 4.8 kHz

Features
operating system: versatile Windows CE control
number of channels: 2 separate patient circuits
color screen: 14.5 cm
soft Touch control keys
preset pathologies
free memory locations
Technical Features
power supply: 100-240 V - 50/60 Hz
max. power consumption: 60 VA
dimensions: 38 x 21 x 16 cm
weight: ± 4 kg
safety class: Class 1 type BF according to IEC 60601-1
directive EEC 93/42 IIa
CE marking

The new Sonic HT is an advanced and complete device for professionals allowing 1/3 MHz multifrequency ultrasound.
The Sonic HT is provided with a special ergonomic head capable to generate 1 or 3 MHz frequency but can also combine both frequencies allowing penetration into different cellular layers at the same time. Pulsed and continuous emission up to 15 W (3 W/cm²).
Provided with a special device attesting no-coupling and contact between the head and the patient's skin, with an acoustic and visual signal.
All the functions are visualized on a large color LCD. In addition to the usual and traditional keys and buttons, it is possible to adjust every parameter on the touchscreen.
The versatile Windows CE operating system ensures possible upgrading.
A wide range of preset protocols with body maps is available for setting most important therapies into the fields of physical therapy, sports medicine, orthopedics, vascular and aesthetic medicine.
After a pathology is chosen, the screen will show the body parts to be treated and the unit will suggest the parameter values to set.
Free memories for entering customized protocols.

Technical Features
frequency: 1 - 3 MHz
modes: continuous and pulsed (from 20% to 80%)
modulation from 20 to 200 Hz
multifrequency head 5 cm²
intensity max.: 3 W/cm²
low BNR
contact control
color touchscreen 400 x 800 pixels
power supply: 115-230 V~ 50/60 Hz
consumed power: 80 VA
dimensions: 40 x 30 x 23 cm
safety class: class I type B according to IEC 601-1
Directive EEC 93/42: IIa

2 wheels foldable rollator with a seat. Equipped with adjustable and anatomical handles and 2 safety plungers for braking. Easy to fold through the central axis. Comfortable padded seat in PVC.
Height: 81/94cm
Max.weight user: 120kg