4x950x950mm
Polyethylene foam material, thermo-moldable at approx. 110-130°C, approx. 30° Shore A

3x950x950mm
Polyethylene foam material, thermo-moldable at approx. 110-130°C, approx. 30° Shore A
OPLAEVAFKIN03
74-00825

2x1100x1100mm
Polyethylene foam material, thermo-moldable at approx. 110-130°C, approx. 30° Shore A

12x950x950mm
Polyethylene foam material, thermo-moldable at approx. 110-130°C, approx. 30° Shore A
OPLAEVAFLIV12
74-00830

6x950x950mm
Polyethylene foam material, thermo-moldable at approx. 110-130°C, approx. 30° Shore A
OPLAEVAFLIV06
74-00829

3x950x950mm
Polyethylene foam material, thermo-moldable at approx. 110-130°C, approx. 30° Shore A
OPLAEVAFLIV03
74-00828

12x950x950mm
Polyethylene foam material, thermo-moldable at approx. 110-130°C, approx. 30° Shore A
OPLAEVAFERA12
74-00833

10x950x950mm
Polyethylene foam material, thermo-moldable at approx. 110-130°C, approx. 30° Shore A

6x950x950mm
Polyethylene foam material, thermo-moldable at approx. 110-130°C, approx. 30° Shore A
OPLAEVAFERA06
74-00832

4x950x950mm
Polyethylene foam material, thermo-moldable at approx. 110-130°C, approx. 30° Shore A

3x950x950mm
Polyethylene foam material, thermo-moldable at approx. 110-130°C, approx. 30° Shore A
OPLAEVAFERA03
74-00831

2x1000x1000mm
Polyethylene foam material, thermo-moldable at approx. 110-130°C, approx. 30° Shore A

1000x1000x10mm
cell-polyethylene foam
Application:
-for padding of positioning splints and correctional braces (e.g. orthoses)
Characteristics:
-closed-celled expanded PE
-washable
-suitable for processing with Streifylen and Streifycolor
-molding temperature depending on heat source -approx.100-130 °C
-approx. 15-18 Shore A

1000x1000x6mm
cell-polyethylene foam
Application:
-for padding of positioning splints and correctional braces (e.g. orthoses)
Characteristics:
-closed-celled expanded PE
-washable
-suitable for processing with Streifylen and Streifycolor
-molding temperature depending on heat source -approx.100-130 °C
-approx. 15-18 Shore A

1000x1000x5mm
cell-polyethylene foam
Application:
-for padding of positioning splints and correctional braces (e.g. orthoses)
Characteristics:
-closed-celled expanded PE
-washable
-suitable for processing with Streifylen and Streifycolor
-molding temperature depending on heat source -approx.100-130 °C
-approx. 15-18 Shore A

1000x1000x4mm
cell-polyethylene foam
Application:
-for padding of positioning splints and correctional braces (e.g. orthoses)
Characteristics:
-closed-celled expanded PE
-washable
-suitable for processing with Streifylen and Streifycolor
-molding temperature depending on heat source -approx.100-130 °C
-approx. 15-18 Shore A

1000x1000x3mm
cell-polyethylene foam
Application:
-for padding of positioning splints and correctional braces (e.g. orthoses)
Characteristics:
-closed-celled expanded PE
-washable
-suitable for processing with Streifylen and Streifycolor
-molding temperature depending on heat source -approx.100-130 °C
-approx. 15-18 Shore A

1000x1000x2mm
cell-polyethylene foam
Application:
-for padding of positioning splints and correctional braces (e.g. orthoses)
Characteristics:
-closed-celled expanded PE
-washable
-suitable for processing with Streifylen and Streifycolor
-molding temperature depending on heat source -approx.100-130 °C
-approx. 15-18 Shore A

The TRIAC ST from Leister is a handy heat gun, primarily used as a profiling tool for welding and processing plastic membranes. Additionally, it is used for professional welding, shrinking and molding various thermoplastics. The two-sided air filters of the TRIAC ST can be easily removed and cleaned. This ensures an optimal air supply and maximum performance. As a successor of the TRIAC S, the ST combines a new, highly robust engine with current technology and modern design in a handy heat gun.

Compared to the design of other heat guns, the proven bar-style heat gun enables welding above the head, on the floor and in narrow areas. The ergonomic, two-component handle and its optimized center of gravity provide an ideal grip, even for longer periods of use and under difficult conditions. When in use, the actively cooled, protective tube ensures continuous safety by protecting against burns. The carbon brake also protects the heat gun from overloading. The extensive range of accessories with over 80 attachment nozzles practically make this heat gun a universal device. The TRIAC ST is already the seventh generation of Leister’s revolutionary line of TRIAC hot air tools. Decades of experience packaged in a modern design, manufactured with Swiss quality: The TRIAC ST is a robust and reliable tool.

VOLTAGE: 100 - 230 V
FREQUENCY: 60 Hz; 50/60 Hz
POWER: 1500 - 1600 W
TEMPERATURE: 40 - 700 °C
AIR FLOW (20°C): 240 l/min
TEMPERATURE SETTING STEPLESS: Yes
STATIC PRESSURE: 3000 Pa
NOISE EMISSION LEVEL: 67 dB (A)
OUTDOOR USE: Yes
DISPLAY: No
ECO MODE: No
E-DRIVE: No
NOZZLE CONNECTION Ø: 31.5 mm / 1.25 in; M14
LENGTH: 338.0 mm
DEVICE DIAMETER: 90 mm
HANDLE DIAMETER: 56 mm
WEIGHT: 0.99 kg
PLUG: KR, 2 poles, 16A; CN, 2 poles, 10A; EU, 2 poles, 16A; JP, 3 poles, 20A; CEE yellow, 3 poles, 16A; JP, 2 poles, 15A; AU, 3 poles, 10A; UK, 3 poles, 13A; US, 2 poles, 15A, polarized; CH T11, 2 poles, 10A
POWER CABLE LENGTH: 3.0 m
CONFORMITY MARK: CE
SAFETY MARK: KCC; S+; UL
PROTECTION CLASS: II

also referenced under: OOMAOWELAIRT, CRM 1, 141.311

Filter class FFP2, particularly suitable for harmful carcinogenic, radioactive substances (viruses, bacteria, fungal spores) and harmful, toxic particles (dust, smoke, aerosols)

Series of classic respiratory protection masks with foldable body. The robust headband and the flexible nose cover molded in the mask material allow an easy adaptation of the mask to each face morphology. With soft foam insert at the nose for optimal sealing. The powerful filter material provides optimal protection in addition to low respiratory resistance. Hygienic individual packaging.
With exhalation valve.

Tamarack Molding Dummies are reusable five to ten times. They are strongly recommended to create a snug, recessed cavity for the Tamarack Flexure Joints™ or Tamarack Dorsiflexion Assist Flexure Joints™.
74-01070

Tamarack Molding Dummies are reusable five to ten times. They are strongly recommended to create a snug, recessed cavity for the Tamarack Flexure Joints™ or Tamarack Dorsiflexion Assist Flexure Joints™.
74-01071

Tamarack Molding Dummies are reusable five to ten times. They are strongly recommended to create a snug, recessed cavity for the Tamarack Flexure Joints™ or Tamarack Dorsiflexion Assist Flexure Joints™.

MOLD MAX™ RTV silicone rubbers will reproduce the finest detail and are suitable for a variety of industrial and art related applications including making molds for reproducing prototypes, furniture, sculpture and architectural elements. MOLD MAX™ silicones can also be used to cast a variety of materials including wax, gypsum, low melt alloys/metals and urethane, epoxy or polyester resins (without using a release agent).

The Baseline hydraulic hand dynamometer is a professional tool that accurately measures grip strength. This allows you to assess patients suffering from hand trauma or dysfunction. This dynamometer provides precise grip strength readings without the subject being able to "feel" the handle movement.

Features:

5 adjustable handle spacing positions from 3.5 to 8.7 cm
Tests grip strength up to 90 kg
Adult standards included
Sturdy molded plastic case