Pneumatic swing phase control

Durability and stability

Smoothness of action

3/8" - DN10, kit of 7 pieces

also referenced under: OOMAOPRECR75B, CRM 76.1

very small model for children - height pelvis from 44 to 60 cm - height thorax from 52 to 70 cm - depth: 79 cm - maximal load: 30 kg

Features
safe device for walking rehabilitation with extra support by a panty which supports the patient in case of a fall
adjustable height and depth of the padded pelvic support
the padded adjustable axillar support protects users with insufficient trunk control
easy access thanks to the back opening
castors with independent brakes

3 steps of 16 cm - tilt: 29° - short flight for modular stairs type "Standard"

The single elements of these modular stairs can be coupled in order to meet the requirements of various difficulties of exercise and space availability. Closed steps and non-slip footboard inserts increase safety.

With the long and short flights, combined with a platform or a support for two flights, you can create several bridge-like structures.

width steps: 57 cm - height of the handlebars: 93 cm

No of places: 3
Seat height: 44 cm
Seat depth: 45 cm
Seat width: 48 cm
Overall height: 81.6 cm
Overall width: 188 cm
Material: Steel

Casings and doors made of 0.9 mm sheet steel, shelves can be accommodated in steps of 40 mm. Reinforced doors internally and lockable by a sliding handle with cylinder lock. Complete with 4 shelves in galvanized sheet metal.
RAL 7035 light gray body, RAL 7016 anthracite doors, powder coated.
Cylinder lock
Allowable load interior cabinet body: 500 kg
Permissible shelf load / Maximum load per rack distributed over the surface (on the metal): 80 kg
Width: 950mm
Depth: 430mm
Height: 1950 mm

This new 4-section pressure therapy unit for daily well-being is especially suitable for solving circulation problems and the imperfections caused by cellulite and water retention in the most difficult areas. It is supplied with 2 leg garments and 1 belly garment. The applications of Farma Press Digital are numerous: anti-cellulite, lymphatic drainage, venous drainage, swelling of the extremities, post-surgical edema, lymphoedema, reduces fluid retention, venous insufficiency.
Technical Features
· Pressure: adjustable from 30 to 250 mmHg
· Output channels: 4
· Timer: 10, 20 or 30 minutes
· 3 compression modes: alternative, compressive and sequential
· Remote control
· Dimensions: L 110 x W 250 x H 180 mm
· Total weight (instrument + accessories): 4 kg
· IP rating: IP20
· Safety class: class II type BF
· Mains supply: 230V~ 50Hz

- Industrial engine
- Easy to use safety switch according to IP 54
- Digital drilling depth and speed indicator integrated in the housing
- Separate emergency stop impact switch
- Precision Spindle bore
- Safety electronics in 24 V DC
- Guaranteed concentricity measured less than 0.02 mm in the drill quill
- Drill spindle with precision ball bearings
- High quality keyless chuck
- Depth stop
- Precision machined, stable drill table with diagonal T-slots and circumferential cooling water channel
- V-belt cover with safety switch
- One piece cast aluminum die-cast quill lever with softgrip handles
- Large, height-adjustable protective screen with safety switch
- Heavy version of the entire machine

also referenced under:: OPTIdrill D 23Pro (230 V), EMACDRILC150, CRM 158

• Bobath therapy treatment table
• Fire-retardant padding and covering class 1IM,
washable
• Safe working load 160 kg
• dimensions 200 x 100 x 50 h cm

wall model
equipped with 4 arms of 130 cm and 4 arms of 110 cm
non-slip grip
adjustable height and variable resistance
dimensions: 132 x 25 x 200 cm

Accessories for 758Z116=1750 Lamination workstation
2x roll holder for subsequent installation in bench-top cabinet

strong and stable 2-section fixed height massage couch
headpiece is movable to 75°
adjustable foot for uneven surfaces
color: dark blue
height: 75 cm
dimensions: 65 x 195 cm

The stable sheet metal construction of the roller cabinet includes an ABS tray and push handle. Drawer unlocked by lifting the drawer.
Placement:
Drawer front height: 60; 60; 60; 120; 120; 120; 180 mm
Supplied with:
Dividing material. 12 divider partitions 410 mm.
Colour:
Two-tone powder-coated. RAL 7035 light grey combined with RAL 7016 anthracite grey.
Drawer/pull-out shelf load capacity: 15 kg
Drawer runner extension (partial/full extension): 75 %
Hoffmann perforated panel grid interval: 9×9 mm
Cylinder lock: modular lock barrel
Height: 1,005 mm
Width: 720 mm
Depth: 450 mm
Drawer usable width: 530 mm
Drawer usable depth: 410 mm
Number of drawers: 7
Weight: 50.3 kg

synthetic material
covered with vinyl upholstery
exercises in standing and lying position
dimensions: 175 x 75 x 15 cm

Length approx: 280 mm
Width/depth approx: 125 mm
Height approx: 140 mm
Weight approx: 2.3 kg
Supply voltage: 230 V
Mains frequency: 50/60 Hz
Electrode: 4.2 kVA
Electrode: 5 – 150 A
TIG DC: 5 – 150 A

also referenced under: OOMAOWELMA01, CRM 11, PRO-STICK 161

Ergometer: 350W - Monitor: 5.5" backlit color LCD - Brake: Servomotor-controlled magnet - Rotating mass: 11 kg
Almost all Tunturi trainers can be connected to your tablet or smartphone. Check your social media, read your emails, or watch your favorite show during your workout.
Even better, use the many available applications. Cycling in Paris, Amsterdam, or the routes of the Tour de France (including the ascent of Alpe d'Huez!), you can do it at home, in the gym, or in a sports or rehabilitation center. Realistic, fun, and challenging. You even have the opportunity to explore your next vacation. Plus, you can track your training results in real-time.

Features:
- Monitor: 5.5" backlit color LCD
- Programs: 1 manual - 4 novice - 4 advanced - 4 athletic - 4 pulse - 1 watt - 1 recovery - 1 body fat
- Resistance levels: 32
- Languages: English
- Watt program: 10-350 in 5 steps
- Braking system: Servomotor-controlled magnet
- Rotating mass: 11 kg
- Resistance: 350W
- Pedals: Comfort
- Power supply: 9V / 1A adapter
- Maximum user weight: 135 kg
- Dimensions: 99 x 60 x 158 cm
- Weight: 38.7 kg
- Adjustable monitor
- Handlebar: Multigrip, adjustable angle
- Saddle type: Comfort
- Saddle adjustment: Height - horizontal
- Manual heart rate sensor
- Telemetric heart rate receiver
- 5 kHz chest strap: optional
- Bottle holder
- Transport wheels
- Bluetooth
- Apps for smart devices (Android & iOS): i-Console+, Fit HiWay, Kinemap
- Tablet holder

Casings and doors made of 0.9 mm sheet steel, shelving possible in 40 mm steps. Doors reinforced internally and lockable by a sliding handle with cylinder lock.
With hinged doors with viewing window (polycarbonate lenses).
Permissible shelf load / Maximum load per rack distributed over the surface (on the metal): 60 kg
Allowable load internal cabinet body: 500 kg
Door opening angle: 225 degree
Height: 2000 mm
Width: 1000 mm
Depth: 400mm
Useful height: 1,840 mm
Number of shelves: 4

220V / 50Hz / 0,2 kW
Teflon coated as protection, range of regulation: 100-180°C
with stand and 1,40m cable

Oscillating plaster saw. Power : 500 W.
From 6.500 to 24.000 oscillations/minute.
Weight : 1.528 kg.
Supplied with 2 blades : Ø 50 and Ø 65 mm for natural plaster.

Mobility degree : 3
Proximal connection : Pyramid adapter
Distal connection : Tube receiver
Knee flexion angle : 145°
System height : 153mm
Maximum body weight : 100kg

Single Axis Pneumatic Knee Joint 6H29 with weight acti- vated stance control offers a safe and smooth gait for moderately and highly active users.
Pneumatic swing phase control with extension assist and independent flexion / extension adjustment may be set from regular to dynamic walking pace in the range up to 6 km/hour.
At the last 10° to full extension pneumatic damper has an additional feature that allows to reduce an angular rate and prevent an impact in extension phase.
Design of the pneumatic damper provides stability of settings for the entire operating period.
Knee joint is equipped with a weight activated brake mechanism that provides a secure stance phase and can be totally released when the weight is transferred to the forefoot without lifting the hip thus saving energy for dynamic pace.
Activity level: М1, М2, М3
Maximum flexion angle: 135°
Maximum weight of patient: 125kg
Material: Aluminium alloy
Weight: 890g

Including; 10m aspirator flexible hose, 1x reduction, 20x clamp, 3x T-connector, 5x straight connector, 9x wall clamp, 3x butterfly valve, 1x silicone sealant cartridge, 1x silicone gun, 1x rubber tape

Integral stainless steel worktop with wooden reinforcement
Integral chrome steel design
Height adjustable feet
Item delivered in spare parts to assemble yourself
Working height 850 mm
Large load capacity
Particularly high stability
Square feet profile
Easy cleaning
Dimensions (W x D x H): 1800 x 700 x 850 mm

also referenced under: OOMAMARP3000M, CRM 88

Ø360mm

Heating: 1x 2400W, 1x fan motor, heating active light
Thermostat: infinitely up to 250°C
Timer: infinitely 0 - 120 minutes, On/Off active light
Housing: Stainless steel, inside and outside, door with large viewing window, opens down to the front, double side bouncy supports
Accessories: 1 grill, 1 tray, standard
Power supply: 230V / 50Hz / 2,5 kW
Dimensions: outside: W 527 x D 450 x H 316 mm / inside : W 404 x D 308 x H 254 mm
Weight: 20 kgs

For medical examination, therapy and massages
Manual rack-and-pinion adjustment of head section
• Foam in bidensity: T35/PK40
• Safe working load: 140 kg
• Dimensions: 202 x 82 x 68 h cm

Polycentric pneumatic knee joint is intended for patients with moderate and high activity level, unilateral or bilateral transfemoral amputations at any level including the knee joint disarticulation and weight up to 125 kg.
Pneumatic swing phase control with flexion / extension adjustment allows good adaption to changes in walking speed up to 6 km/h.
Polycentric design of knee ensures increased security in the stance phase and geometric shortening of the prosthesis
in the swing phase.
Center of rotation of knee joint is located in the forefoot area that together with polycentric design ensures extra security for users.
Knee joint has an additional simple and convenient adjustment of the security in stance phase for users with different activity level — from high for the patients with low activity up to the standard for active patients.
Activity level: 2-3
Maximum flexion angle: 150°
Maximum weight of patient: 125kg
Material: Aluminium alloy
Weight: 875g

The most efficient oscillating machines, available in three power categories (SuperCut, MultiMaster, MultiTalent); new model with Starlock tool carrier (optimized power transmission for up to 35% faster working speed).
Almost unlimited applications (sawing, grinding, scraping, cutting, grating) thanks to the oscillating movement (low dust emission).
Electronic progressive adjustment of the rotation speed for optimal use.
Maximum quality and stability thanks to the metal gear case and the combined use of ball and needle bearings.
Optimal maneuverability thanks to the ergonomic design and the Softgrip coating, reduced weight.
Powerful MultiTool for rapid progress (for interior design and renovation) with more than 30 accessories for sawing in wood and metal, sanding, cutting tiles, etc.
Delivery:
Set of 30 accessories, 1 × suction device, 1 × plastic tool case.
Set of 30 accessories: 1 × E-Cut Long-Life saw blade - (10 mm), 2 × E-Cut Long-Life saw blades (35 mm), 2 × E-Cut Long-Life saw blades ( 65 mm), 1 × E-Cut Carbide Pro saw blade (32 mm), 1 × carbide saw blade (⌀ 75), 1 × carbide rasp (triangular), 1 × spatula, 1 × perforated backing pad , 1 × perforated sanding sheet each (grit 60, 80, 120, 180).
With 1 × ALG 80 rapid charger, 2 × Li-Ion batteries (18 V / 3 Ah).
1 “Akku” case with charger, 1 backing pad, 3 sanding sheets each (grain 60, 80, 120, 180), 1 fixed spatula, 1 HSS segment saw blade, 1 Long-Life E- saw blade Cut (65 mm), 1 E-Cut universal saw blade (44 mm).
Manufacturer no .: AFMM 18 QSL
Number of batteries included: 2
Battery type: Lithium-ion
Battery capacity: 3 A h
Battery voltage: 18V
Tool holders: StarlockPlus, Starlock
Number of oscillations: 11'000 min-¹ - 18'500 min-¹
Oscillation angle: 3.4 °
Angle approach of the support plate: 80 mm
Weight: 1.8 kg

color: blue - Ø 50 cm - length: 90 cm

the ideal exercise help for proprioception by children

composed of a hard foam-rubber core skin coated
soft, innocuous and integrated upholstery
urine resistant - easy to clean

• 100% Swiss made quality
• Leister's smallest manual device
• Continuous electronic temperature control
• Continuous electronic adjustment of the air flow
• Quiet
• Integrated flexible foot
Voltage V ~: 230
Power W: 460
Temperature ° C: 40-600
Air flow (20 ° C) l / min: 40/110
Dimensions (L × ∅) mm: 235 x 70
Weight: 400gr

also referenced under: OOMAOWELHJ01, CRM 1.0, 100.688

Mobility degree : 3
Proximal connection : Pyramid adapter
Distal connection : Tube receiver
Knee flexion angle : 145°
System height : 153mm
Maximum body weight : 100kg

Smallness and light-weight
Adjustable extension assist for swing phase control
Designed for child’s AK and knee-disarticulation amputee

Welding mirror with Teflon coating and automatic temperature control. Suitable for indoor and outdoor use.

Diameter: 280mm
Weight: 3.0kg
Power consumption: 900 Watts / 230 Volts 50 Hz
Design: straight
Includes device stand.

also referenced under: OOMAOWELPR28, CRM 7, BARY A-2

System concerning ergonomic positioning based on Swedish studies - this chair ensures complete relaxation and positions the patient to allow head, back, and shoulder treatments.
- the position and the rotation of the seat can be adjusted
- the softly upholstered parts are adjustable to provide optimum comfort
- weight: 9,5 kg
- foldable
- ideal for domiciliary use

Chip collection volume: 110 l
Extraction duct inlet outside nominal width: 203 mm
Extraction duct outlet outside nominal width: 1 x 100, 1 x 120 mm
Length approx.: 1000 mm
Width/depth approx.: 500 mm
Height approx.: 2100 mm
Weight approx.: 39 kg
Idle Speed: 2950 min¯¹
Motor input: 1.5 kW
Supply voltage: 230 V
Mains frequency: 50 Hz
Filter surface area: 1.92 m²
Max. sound pressure level: 85.7 dB(A)
Rated volume flow: 1900 m³/h
Max. negative pressure: 1700 Pa

For medical examination, therapy and massages
Manual rack-and-pinion adjustment of head section
• Foam in bidensity: T35/PK40
• Safe working load: 140 kg
• Dimensions: 202 x 67 x 68 h cm

Robust and stable universal grinding machines with abrasive belt and grinding wheel for a wide range of materials
Heavy, durable industrial design with maintenance-free motor
Housing made of extruded aluminum
Large, heavy mounting flanges and thus high disc concentricity
Sanding attachment with graphite coating; prevents friction and heat
Stop allows quick and easy sanding of workpieces
Tape adjustment without tools - only adjustable with a handle screw
Universal corundum grinding wheel and sanding belt in the standard scope of delivery

- Excellent elasticity of carbon foot provides the flexibility and comfort when walking.
- With graphite multi-axis ankle joint, it provides a better proprioception when walking on the uneven surfaces.
Material: Carbon fiber, PU, Aluminum, Rubber
Heel height with(mm): 10
Maximum load: 100 kg (size22-23), 125 kg (size24-28)