Blister-forming Set for BK and AK prostetic socket production. The set includes a Blister-forming tray with two plates (D=320mm and D=265mm) and a vacuum-table with fitting silicone-rings and assembly material.

Adjustable extension assist for swing phase control

Fully adjustable stance flexion function

Ultra-light graphite construction

Durability and stability

• Safe working load and lifting capacity of 240Kg (528lbs)
• The power assisted backrest section incorporates anti-trap
design gas strut
• Backrest angle adjustment from -25˚ to +75˚
• Choice of hydraulic or electric height elevation
• Excellent height range from 45cm to 98cm
• Retractable wheel design with adjustable foot for stability
on uneven surfaces
• Breathing hole and plug included as standard
• Purpose made precision bearings on all pivot points
• Clearance beneath frame for mobile hoist
• Hand switch fitted as standard on electric models
• Standard upholstery width of 65cm

Worktop 50 mm thick. Holes are provided for fixing drawers and legs.
Base in sturdy U-shaped steel profile. Drawer unit with 720 mm useful height and central closure. Equipped with 5 drawers (partial extraction).
Worktop in beech plywood, glued, waterproof. With colorless UV varnish.
Drawer units 600 mm wide in sheet steel with cylinder lock with 2 keys and central locking. Sheet steel drawer with large aluminum handle bar, extendable up to 90%. Designed for compartmentalization. The drawer units can be mounted on the right, left or in the center of the worktop. For a plan length of 1500 mm, possibility of mounting 2 - 3 boxes, for a plan length of 2000 mm, possibility of mounting 3 - 4 boxes (depending on the width of the boxes).
Legs in folded sheet steel (80 mm wide), with reinforcements.
Drawer units to be mounted on the right or on the left.
Front height of drawers: 60; 100; 140; 180; 240 mm
Colors: RAL 7035 light gray body and feet, RAL 5005 signal blue drawers, powder-coated. For other paintings, price on request.
Note (s): Delivery by separate elements, more economical. Delivery without assembly.
Established height: 850 mm
Allowable load of drawers / extendable shelves: 100 kg
Established load capacity / table - Maximum load per compartment distributed over the surface (on the wood): 1,000 kg
Worktop thickness: 50 mm
Drawer extraction (partial / total): 90%
Cylinder lock: Modular cylinder
Safety certificate: GS TÜV Süd
Worktop length: 1,500 mm
Worktop depth: 700 mm
Worktop thickness: 50 mm
Drawer cabinet height: 800 mm
Drawer cabinet width: 600 mm
Drawer cabinet depth: 630 mm
Usable width of drawers: 490 mm
Usable depth of drawers: 520 mm
Number of drawers: 5
Worktop material: Multiply beech
Worktop surface: colorless varnish

Equipment: Transparent suction hood, flexible suction arm with three joints, range of the suction arm 1m
Volume flow:150 m3/h
Exhaust arm tube Ø: 75mm
Exhaust hood Ø: 280mm
Weight: 2.5kg
Hinged connections colour: White

Flexion angle: 145°
Mobility: 3

Melamine top, 25 mm thick. L-shaped base adjustable in height with perforated side cover, aluminum color RAL 9006. Leveling cylinders.
Vertical electrification behind the removable covers and horizontal by cable trunking

Worktop 50 mm thick. Holes are provided for securing drawer units and support legs.
Worktop of beech marine ply, with waterproof glue. Finished with clear UV varnish.
Drawer unit 600 mm wide of sheet metal with cylinder lock with 2 keys and central lock. Drawer units can be mounted on the right, left or centre of the worktop. Worktops of 1500 mm can accept 2 − 3 units, worktops of 2000 mm can accept 3 − 4 units (depending on the width of the units). Drawers of sheet metal with wide aluminium grip handles. − Can be pulled out 90% − With slots for drawer dividers on the inner faces.
Support legs of folded sheet metal (80 mm wide), with cross braces.
Fitted with:
Drawer front height: 60; 80; 100 mm
Supplied for self-assembly, saving freight costs. Delivered unassembled.
Technical Data
Material thickness 1 mm
Workbench height 850 mm
Drawer/pull-out shelf load capacity 100 kg
Workbench/desk load capacity - maximum distributed load (on wood) 400 kg
Insert thickness 50 mm
Drawer runner extension (partial/full extension) 90 %
Cylinder lock modular barrel
Safety certificate GS TÜV Süd
Series KOMBI workbench
Height: 850mm
Worktop length: 1,500mm
Worktop depth: 700mm
Worktop thickness: 50mm
Drawer body height: 300mm
Drawer body width: 600mm
Drawer body depth: 630mm
Drawer usable width: 490mm
Drawer usable depth: 520mm
Number of drawers: 3
Material of worktop: Beech marine ply
Surface worktop: clear varnished

fixing of round and angular one- and two-way suction tubes and of diverse
plaster model rods possible up to 35 mm
fixing of the prosthetic socket can be done either with the tude adapter or
with the S.A.C.H.-Foot Adapter
horizontal shifting of the upper and lower fixing by 50 mm each is possible
in order to transfer extreme socket positions
firmly integrated, easily readable height scale (900 mm)
high quality, durable materials
stepplessly rotatable by 360° degrees via wing screw
For video of user's manual : https://www.youtube.com/watch?v=hVbUbQwMsiY

Adaptable for biceps rehabilitation
Very stable frame and comfortable seat.
• Tibial supports on both sides for independent stretching and flexing movement of knees and / or elbows
• Balancing pole which allows for height adjustment of the tibiae supports
• Width adjustment for flexion and extension elements
• Moveable handle bar, adjustable on three levels
• Backrest inclination: 12°
• Seat inclination: 4°
• 20 kg weight plates, split between the two sides, equipped as standard
• Steel frame, epoxy painted
• Fire-retardant padding and covering, class 1IM, foam density 40
• Stabilizing base-skids. Bench dimensions:
• height 120 cm,
• balancing pole width 85 cm,
• depth 90cm
• Seat height: 65 cm
• Seat width: 54 cm
• Seat depth: 50 cm

510 x 380 x 550 mm

steel

The Tunturi Performance R60 rower offers one of the most complete workouts for the whole body. You train the glutes, legs, back muscles, biceps and triceps, shoulders and abdominal muscles. While rowing you burn fat, you train the muscles and you improve your endurance on one single device.
You can work out according to your own preferences, as you can choose between 16 resistance levels and 18 programs.
The R60 is extremely quiet due to the magnetic PMS braking system with flywheel. Braking is thus done with magnetism instead of discs.
Simplicity while working out
The R60 rower has an easy-to-operate monitor with different parameters and a graphic representation of the workout profiles. The rowing device can also be operated with the keys on the rowing handle. You can, for example, adjust the intensity without having to interrupt your workout to touch the monitor.
The rowing machine never gets in the way because it is easy to fold and store using the transport wheels.
The R60 is equipped with a Bluetooth connection, which allows you to connect to workout apps such as Tunturi Routes and Kinomap. As a result, training remains fun and challenging.
Technical Features
- brake system: PMS, servomotor
- 16 resistance levels
- programs: 18
- rotating mass: 8 kg
- monitor: monochrome LCD displays time, distance, calories, time/500m, strokes per minute
- power supply: adapter (6V DC - 0,5 A)
- foldable
- max. user weight: 135 kg
- dimensions: L 197 x B 50 x H 66 cm
- dimensions folded: L 35 x B 50 x H 159 cm
- weight: 46 kg
- adjustable monitor
- seat type: Comfort
- rail type: dual rails
- telemetric HR receiver built-in
- chest belt (5 kHz) is optional
- remote control on rowing handle
- Bluetooth connection
- apps (Android & iOS): Tunturi Routes, Kinomap
- transport wheels

• Steel structure
• Coating with rubberized and non-slip fabric
• Rest platform element 60 x 60 cm
• 5 steps, height 13 cm
• Dimensions: 182 x 60 x 70 ∆ 97 H cm

Ultra-light graphite construction

Classic and simplicity

Adjustable extension assist for swing phase control

Smoothness of action

also referenced as: OOMAOPRECR75C, CRM 73

• Bobath therapy treatment table
• Fire-retardant padding and covering class 1IM,
washable
• Safe working load 160 kg
• dimensions 200 x 200 x 50 h cm

Versatile application possibilities
Two-stage gear ratio
Tool holder MK 2
Safety electronics in 24 Volt version
EMC filter class C1
Drilling and milling head can be tilted by ± 90 ° on both sides, thus drilling and milling in angular position as required
Height-adjustable and large-dimensioned protective screen with microswitch
Accurate delivery through positionable scale rings on all handwheels
Simple and clear operating unit with on-off switch, potentiometer and emergency stop impact switch
Infinitely variable speed from 100 to 3,000 min-1
High concentricity measured by tapered roller bearing better than 0.015 mm in quill
Stable column with dovetail guide via wedge bars adjustable on all 3 axes
Game in the feed spindle adjustable and adjustable
Column laterally displaceable for extended application
Massive cross table with T-slots and coolant channel as well as adjustable end stops
Integrated longitudinal scale in the cross table
All travel paths can be read on scales
Clean milling pattern by individually clamped guides
Inexpensive and stable in value

also referenced under: OPTImill BF 16Vario

FEATURES
- Complete drive shaft with bayonet connection
- Abrasive ring diameter 100x90mm length 283mm
- Integrated vacuum cleaner and external fabric filter

MACHINE DIMENSIONS
- Width 540mm - Depth 410mm - Height 440mm - Weight 34 Kg

POWER SOURCE
- Single phase 230V - 1ph - 50Hz

D 325/L 600mm

Equipment Pair of feet that can be driven in, with levelling feet, adjustable head section, lying surface made of 70 mm thick padding, chrome-plated square tubing
Dimensions WxDxH 650 x 1,950 x 650 mm
Material Synthetic leather cover
Weight 34 kg
Cover colour Classic silver-grey

Max. 20 degrees adjustable lamination
Spring loaded mechanism
Light-weight construction
Pre-bent lamination plate

Material: Carbon fiber
System height: 250mm
System weight: 600g
Maximum flexion angle: 115°
Maximum body weight: 100kg
Modular connector options: D-TLP-AAH, D-TLP-SAH

Version Mirror, mobiler
Equipment With rear panel, chrome plated frame, tilting
Dimensions WxH 52 x 144 cm
Overall height 165 cm

Bars length: 300 cm
Very thin 1.5 cm base
Base width: 60 cm
Ramps and telescopic supports in epoxy steel.
Characteristics:
Weight: 49 kg

mechanical column scale with eye-level beam
the construction of steel and cast iron makes it extremely stable
high capacity of 220 kg
fine graduation of 100 g
reset-to-zero function
transport castors

5 steps of 9,5 cm - tilt: 18° - long flight for modular stairs type "Standard"

The single elements of these modular stairs can be coupled in order to meet the requirements of various difficulties of exercise and space availability. Closed steps and non-slip footboard inserts increase safety.

With the long and short flights, combined with a platform or a support for two flights, you can create several bridge-like structures.

width steps: 57 cm - height of the handlebars: 93 cm

Degree of mobility: 3
Proximal connection: pyramidal adapter
Distal connection: tube receiver
Knee flexion angle: 150°

- Designed for demanding continuous use when oil-free and clean compressed air is required
- Air is blown through the cooling chambers of the cylinder by means of a fan; thus optimum cooling is achieved
- Large piston, movably mounted, resulting in 60% more power compared to tilt piston systems
- Cylinder running surfaces with high-precision and micro-smooth surface for minimum friction
- The high-performance piston or piston ring made of a graphite-Teflon-carbon special compound has a much longer service life than a simple piston ring made of Teflon
High-quality maximum equipment
- Filter pressure regulator for stepless adjustment of the working pressure, with simultaneous separation of dirt, oil and condensate
- One compressed air outlet each for filtered compressed air, filtered and oiled compressed air and a direct outlet on the compressed air tank
- Two comfort safety quick couplings
- High-quality CONDOR pressure switch
- One pressure gauge each for tank and working pressure
- Simple condensate drain via ball valve
Compressed air lines and reservoirs with long service life
- Flexible armored hose line with heat protection prevents vibration fractures
- Inside and outside hot-dip galvanized, corrosion-protected compressed air reservoir with 15-year warranty against rusting through
Comfort safety quick couplings
- One-hand safety couplings according to DIN EN 983 used by AIRCRAFT as the first manufacturer in series production
- Two separate locking systems for maximum working safety
- No whipping of the hose line during uncoupling
Convenient transport
- Transport back-friendly in upright position and without lifting
- Additional transport handle directly on the container
- Puncture-proof PU foam wheels
- Stable steering chassis with parking brake
Immediately ready for use
- Fully automatic on-off operation
- With all safety devices
- Completely ready for connection

also referenced under: AIRPROFI 220/50 OF PRO, CRM 178.3

Carbon Foot is intended for patients with M1–M3 activity
level unilateral or bilateral transfemoral amputation at all
levels or transtibial amputation on the boundary of the
upper, medium and lower-third of it, can be used in prostheses
after the disarticulation of the knee or hip joint.
The foot is produced in right and left versions in 5 categories
of stiffness that are selected depending on the
patient’s weight from 55 kg to 125 kg.
FEATURES:
- Adaptation of the hydraulic system of the prosthesis
to the surface while walking.
- Independent plantar (PF) and dorsiflexion (DF) adjustment.
- Hydraulic system lock for use at low and negative
ambient temperatures, for ease of driving a bicycle,
motorcycle, car, and changing the heel height of the
the foot.
- Accamulation and return of energy by elastic elements
of the foot.
- Response proportional to the patient weight and activity
level.
- Reliance on the entire surface of the foot.
- Soft contact with the surface when stepping on the
heel and smooth rollover.

The Bure Gas Standard is suitable for people who need a high quality non-motorized walker adjustable to the size of the user. The height is easily adjusted by means of a lever placed judiciously on the gas spring in order to be accessible to the user and the therapist.
Anatomically shaped cushions relieve the shoulders, arms and neck and divert the force to larger muscle groups such as the chest and leg muscles. The result is greater stability and easy steering of the rollator.
The ergonomic handles are individually adjustable in any direction. Important for stroke patients who find the usual position of their hand in this way. The anatomical two-section armrests adjust to allow the user to easily reach the handles while standing.
As an option, one or two manual brakes can be provided allowing the user to manipulate
ease of the brakes when walking. The brakes act on the rear wheels and if necessary a directional lock can be activated for straight walking. The rollator can be equipped with a removable step support and in this way becomes a device for transferring the patient to the bed or the toilet.
The Bure Gas Standard is also suitable for tall people up to 2 meters.
The components meet international protection standards and may occasionally be used in areas
wet.

Technical characteristics:
dimensions: width 78 cm, depth 80 cm, height: 91 - 129 cm
internal arm support measures: from 25 to 50 cm
max weight user: 150 kg

Version: Switch not included
Dimensions WxDxH: 420/650x270x150mm
Diameter: 150mm
Material: Galvanised
Volt: 24V DC / 230V AC

Equipment: Double doors, centrally locking, security lock, 4 height-adjustable slotted shelf inserts
Dimensions WxDxH: 950 x 400 x 1,950 mm
Material: Steel sheet
Depth: 400 mm
Weight: 75 kg
Colour: Light grey (RAL 7035)

Above knee amputation, transfemoral

220V power supply. Dimensions: 45 x 40.5 x 16 cm
Based on the prince of light transmission for optical fiber, the assembly of the platform was developed by the equal and sees the image reflected on the interior mirror support. The quality of the bending and contact rendering allows you to obtain precise diagnoses. Very robust (15 mm thick acrylic glass), this podoscope also has a modern and elegant design

230V, Volume 6, m³/h, Vacuum 60mbar

Workbench in sturdy steel construction. 50 mm wide base with reinforcement. Feet with non-marking plastic glides. With 1 pair of gussets to ensure rigidity. 16G drawer unit with central locking by cylinder lock. Full extension drawers with differential slides and load capacity of 75 kg.
Workbench height: 850 mm
Permissible load of drawers / extendable shelves: 75 kg
Permissible work bench / table load - Maximum load per rack distributed over the surface (on the wood): 400 kg
Worktop thickness: 50 mm
Drawer extraction (partial / total): 100%
Usable drawer surface in G: 12 × 20
Worktop length: 1,500 mm
Worktop depth: 750 mm
Height of drawer unit: 300 mm
Width of drawer unit: 400 mm
Depth of drawer unit: 650 mm
Useful height of drawer unit: 225 mm
Useful width of drawers: 300 mm
Useful depth of drawers: 500 mm
Number of drawers: 2
Weight: 82 kg

Version: Switch not included
Dimensions WxDxH: 420/650x270x150mm
Diameter: 100mm
Material: Galvanised
Volt: 24V DC / 230V AC

on rolling stand in white epoxy
Very strong, the mirror and expanded agglomerate form a single block, thus guaranteeing the maximum solidity.
U-shaped frame, with a minimum weight
Even in case of holes, mirror fragments adhere to the agglomerate backing for increased safety.
dimensions: 100 x 170 cm

Pneumatic swing phase control
Adjustable to pinpoint accuracy
Smallness and light-weight
Adjustable extension assist for swing phase control
Designed for child’s AK and knee-disarticulation amputee

electronically controlled heating bath for preparation of paraffin and fango

Features:
- capacity of 28 litres
- works according to the "in a double saucepan" principle
- stainless body with control panel in front
- thermostat - pilot lamps - indication of temperature
- sterilisation is possible at 90°C
- operating temperature: 50 - 65°C
- dimensions: 60 x 37 x 29 cm
- 230V~ 50/60Hz - consumption: 800 W - CE

• steel structure, galvanized finish

Version: Switch not included
Dimensions WxDxH: 420/650x270x150mm
Diameter: 125mm
Material: Galvanised
Volt: 24V DC / 230V AC

Its sturdy metal frame and the thick material used, combined with the weighted baseplate, make this highly stable.
The baseplates have been designed to be as close to the floor as possible to make it easy for the user to access the walking area.
Height is adjustable (45-66 cm) via pins concealed in the upper columns. Folds away easily.
Chrome and polyester finishing.
Length: 250cm Width: 50cm

• SOFT FOAM: Child-friendly materials provide you with peace of mind and your child with a soft, low-impact surface to toddle, tumble, and play.
• EASY MAINTENANCE: Lightweight blocks resist stains and wear, thanks to an easy-to-clean vinyl surface that wipes clean with a damp cloth.
• CERTIFIED & SAFE: Enjoy quality play with low-emission, child-friendly materials in accordance with federal safety standards.
• CHILD DEVELOPMENT: Bright, multi-colored surface and shapes stimulate your child's attention and promote the development of their gross motor skills, coordination, and color recognition.
• 5-PIECE SET: Watch as your child stacks and swaps five different shapes to create a tiny track to climb and crawl across for hours of fun.
• PRODUCT DIMENSIONS: Cylinder: 8" (Dia) x 17" (H) Small Rectangle: 8.5" (L) x 8.5" (W) x 16.25" (H) Triangle: 24" (L) x 16.25" (W) x 1.5"-8.5" (H) Large Rectangle: 16.25" (L) x 16.25" (W) x 8.5" (H) Half Moon: 16.25" (L) x 16.25" (W) x 8.25" (H)

• handrail in highly sturdy tulipwood.
• 140kg (2x70) safe workload
• 15mm stand thickness
• 53 kgs weight
• no decking required
• Ideal for limited available space
• Length: 300 x 65 x 75 Δ 108 h cm

for corner construction with two flights - for short or long flights - type Standard or Plus

large model for children - height pelvis from 85 to 112 cm - height thorax from 92 to 126 cm - depth: 95 cm - maximal load: 75 kg

Features
safe device for walking rehabilitation with extra support by a panty which supports the patient in case of a fall
adjustable height and depth of the padded pelvic support
the padded adjustable axillar support protects users with insufficient trunk control
easy access thanks to the back opening
castors with independent brakes

for warming up fango or paraffin

Features:
- entirely made in stainless steel 18/8
- the contents of the heater is warmed up and kept at temperature by a liquid or oil in the double wall
the “in a double saucepan” principle ensures a homogeneous and stable temperature - no overheating or destruction of the product
the rectangular form provides an excellent stability
- capacity for 12 kg of fango or paraffin
- operating temperature: 50 - 65°C
- dimensions: 39 x 41 x 23 cm
- 230V~ 50/60Hz - 1170W - CE