- Excellent elasticity of carbon foot provides the flexibility and comfort when walking.
- With graphite multi-axis ankle joint, it provides a better proprioception when walking on the uneven surfaces.
Material: Carbon fiber, PU, Aluminum, Rubber
Heel height with(mm): 10
Maximum load: 100 kg (size22-23), 125 kg (size24-28)

Practical desk table with progressive height adjustment (adjustment range 680 - 820 mm).
Robust support with crosspieces.
Base in 2 mm profile tube, 50/50 mm, square.
Optimal foot space thanks to the ergonomic structure.
Light gray 25 mm thick melamine top.
Metallic gray base, powder coated.
Workstation height adjustment: 680-820 mm
Worktop thickness: 25 mm
Width: 2,000 mm
Depth: 800mm

- Closed-loop controlled temperature
- Open loop controlled air volume
- Intelligent «e-Drive» operating unit
- Ergonomic handling
- Modern design/ Swiss made
Power W: 1600
Voltage V~: 230
Temperature °C: 45 - 620
Air volume (20°C) l/min: 160 - 240
Size (L x ∅) mm: 335 × 90
Handle ∅ mm: 56
Weight kg: 1

with rolling stand, 230V 250W

Contains:

Chest Strap
Set of Counter-Traction Straps
Pelvic Strap
Chin Strap
Spreader Bar
Round Pillow
Leg Rest Height Adjustable by Cylinder

Integral stainless steel worktop with wooden reinforcement
Integral chrome steel design
Height adjustable feet
Item delivered in spare parts to assemble yourself
Working height 850 mm
Large load capacity
Particularly high stability
Square feet profile
Easy cleaning
Dimensions (W x D x H): 2000 x 700 x 850 mm

Cone diameters: ⌀48.3 / ⌀88.9

also referenced under: OOMAVAPUCR103, CRM 59

Cone diameters: ⌀84 / ⌀129

also referenced under: OOMAVAPUCR102, CRM 58, CR 8910

Cone diameters: ⌀104 / ⌀154

also referenced under: OOMAVAPUCR101, CRM 57, CR 8900

MGO80B 220/240-2.75 kW B14-19 with on/off switch

also referenced under: OOMAVAPUCR12, CRM 56.2

The exercises on the table improve the ability to do daily activities, therapeutic rehabilitation in case of orthopedic, rheumatologic and neurological disease of hand.
Improves the manipulation skills, motor coordination of hand and eyehand coordination, for dorsiflexion, palmar flexion and rotation in wrist joint, conversion and inversion of the forearm.
For use in hospitals (in rehabilitation, surgical or neurological wards) as well as in outpatient rehabilitation.
- Simple to use table, both for adults and children (height adjustment from 54 to 86 cm).
- Made of wood and steel, top painted with ecological varnish.
- 4 non-slip rubber feet with height adjustment.
- All accessories fixed to the wooden top with height adjustment.
- There is the possibility to do exercises with additional load, included: 5 pcs of 0,25 kg soft leather plummets, ropes and hangers for resistance exercises fixed to the wooden top.
- table top dimensions: 52 x 86 cm
- height adjustment: 54 - 86 cm
- plummets: 5 x 0,25 kg
- total weight: 10 kg

Dimensions and weights
595x460x527mm / 50kg
Starter: Manual start
Fuel: petrol
Tank capacity: 15 liters
Sound pressure level: 75 dB(A)
Nominal voltage: 230 V
Active power LTP: 3.8 kW
Active power COP: 3.3 kW
Generator IP degree of protection: IP 23
Socket type: 2 x 230V
Socket IP degree of protection: IP 44

Dimensions WxDxH 33 1/8 x 22 7/8 x 16 1/8 inch

10 degrees adjustable lamination
Light-weight construction
Pre-bent lamination plate

incl. mounting bar for workbench assembly

Above knee amputation, transfemoral

Below knee amputation, transtibial

for inserting eyelets, hooks, push buttons, etc. also for punching with thread adaptor (Daude) for upper puncher, radius=150mm

Worktop 50 mm thick, robust, in beech plywood, water resistant, colorless UV varnish. Support legs of folded sheet metal (80 mm wide), with cross braces.Colors: RAL 7035 light gray tubes, powder coated.
Worktop thickness: 50mm
Established admissible load / table - Maximum load per compartment distributed over the surface (on the wood): 400 kg
Worktop depth: 700 mm
Worktop thickness: 50 mm
Worktop length: 1500 mm
Established height: 850mm

incl. mounting bar for workbench assembly

color: red - Ø 35 cm - length: 125 cm

the ideal exercise help for proprioception by children

composed of a hard foam-rubber core skin coated
soft, innocuous and integrated upholstery
urine resistant - easy to clean

130°

Length approx: 1070 mm
Width/depth approx: 340 mm
Height approx: 950 mm
Weight approx: 72 kg
Supply voltage: 230 V
Mains frequency: 50 Hz
Extraction duct nominal width outside: 2 x 100 mm
Emissions sound pressure level at workstation Lp (idling without extraction unit): 87 dB(A)
Max. sanding width: 75 mm
Sanding belt length: 2000 mm
Sanding belt width: 75 mm
Circumferential belt speed(s): 29 m/s
Contact wheel diameter: 200 mm

Using the plaster modelling aid, you can process plaster models quickly and efficiently. Continuous clamping and re-clamping of the plaster model is now a thing of the past.
Your production process is optimised.
The plaster modelling aid saves time and labour costs, facilitating everyday work routines.
Plaster models weighing up to 40 kg can be processed with the plaster modelling aid.
Dimensions WxDxH: 119 x 55 x 130 mm
Equipment: 4 attachments with diameters of 16 mm, 21 mm, 26 mm and 36 mm
Weight: 1.4 kg
Material: Stainless steel
To be used for: for plaster modelling without securing the plaster model with jaw clamps or ring clamps; for various tube diameters
Type of Planning and Equipment: Plaster Casting and Plaster Modification

also referred as: OOMAOPRECR75T, CRM 76

Max. 20 degrees adjustable lamination
Spring loaded mechanism
Pre-bent lamination plate

Material: Aluminium alloy
System height: 220mm
System weight: 760g
Maximum flexion angle: 115°
Maximum body weight: 100kg
Modular connector options: D-TLP-AAH, D-TLP-SAH

Height of steps: 1st step: 20 cm 2nd step: 40 cm 3rd step: 59 cm
In 18/10 stainless steel 3-step step stool Designed entirely in stainless steel to increase its longevity and facilitate total disinfection.

Adaptable with or without lock

Excellent stability and security

Positive locking mechanism

Adjustable extension assist for swing phase control

- Three kinds of hardness Rubber Design (60, 70, 80) replaceable for user.
- The Split toe allows the foot to adjust to uneven ground.
- Stores and releases energy through its full length.
- Smoother roll over to toe.
Material: Aluminum alloy,Stainless steel seat,Carbon fiber,Synthetic fiber
Heel height with(mm): 10
Maximum load: 100 kg (size22-23), 125 kg (size24-28)

400W, 2 pieces

also referenced under: OOMAOPRECR75F, CRM 71.3

The carbon foot is intended for the patients with M2 — M4
activity levels (excepting sportive loads), unilateral or bilateral
trans-femoral amputation at all levels or trans-tibial
users on the line of the upper and middle third; it can be
used in prostheses after the disarticulation of knee or hip
joint.
The foot is available in left and right design and in
8 categories of stiffness suitable for the patients from
45 kg to 130 kg depending on the patient’s activity level.
The carbon foot consists of extended carbon fiber toe and
heel blades with nonlinear stiffness characteristics, which
provide energy return proportional to the pace of the walk,
easy and smooth rollover.
The foot incorporates an innovative one-piece elastic
connection of the toe element and the adapter that allows
for a low building height of the foot and a high degree of
energy efficiency when walking.
Technical solutions applied in the design of 1H15Y feet
aimed at ensuring high safety level, significant load reduction
on the spine and sound limb, providing a natural gait.
Activity level: M2, M3, M4
Maximum patient weight: 45-130kg

- Ideal for sawing steel, aluminum, copper, PVC and Teflon
- Stepless, electronic speed control from 30 - 80 m / min
- Particularly quiet - up to 60% quieter than comparable band saws
- Low vibration and wear thanks to special gearbox with two large gears made of hardened steel
- Guaranteed cutting accuracy of max. 0.3 mm course over 100 mm cutting length
- Each machine individually tested for precision in Italy
- Low-speed DC drive motor with carbon brushes for up to 10 times longer life
- Electronic temperature and ampere recording monitoring against overload
- Cast strip wheels with ground running surface without rubber pads, therefore suitable for dry and wet cutting
- Massive saw bar made of die-cast aluminum (readjustable from MBS 125) and with sturdy transport lock
- Two movable, adjustable saw band guides with chip scraper made of metal
- Particularly stable base plate with non-slip feet
- Very service-friendly, as components are easily accessible

also referenced under: MBS 105, CRM 116

- for even heating of the Confidence Socket
- heated using a heat gun

Specifications:
Oven Hood, Stand, Silicone Base & Insulation Cap

Amputation: Below-knee (transtibial) amputees
Socket: Interim socket / Test socket
Remolds: 10 times
All-in-One: mounting plate attached
Offset: 1 cm
Suspension system: Passive vacuum (liner + sleeve) or Pin-Lock (Clutch)
Weight bearing: Total-Surface-Bearing (TSB)

Polycentric Pneumatic Knee Joint 6H23 is intended for patients with moderate activity level, unilateral or bilateral transfemoral amputations at any level with the exception of knee joint disarticulation. The Knee Joint 6H23 provides pneumatic swing phase control and independent flexion/extension adjustment. The Joint 6Н23 is well adaptive to changes in walking tempo in the extended range speeds — from slow to rapid step without changing the initial settings.
Polycentric design ensures increased security in the stance phase and geometric shortening in the swing phase, increasing the distance from the base surface during swing phase that enhances the confidence of patient in the prosthesis.
Activity level: М2, М3
Maximum flexion angle: 150°
Maximum weight of patient: 100kg
Material: Aluminium alloy
Weight: 780g

All technical data is based on an operating pressure of 6.3 bar and the indiqué inside pipe shown.
A range of powerful and very quiet revolver-type drills with a maximum drilling power of 13 mm in steel. Air exhaust through the handle prevents swirling of chips. With quick-release chuck.
Discharge power: 350W
Maximum rotation speed: 0 min-1 - 2400 min-1
Quick clamping chuck clamping range: 1.5mm - 10mm
Maximum quantity of absorbed air: 600 l / min
Threaded connection: BSP
Pneumatic connection: 1/4 inch
Recommended hose size (⌀ int.): 10 mm
Weight: 1 kg
Sound level: 82 dB (A)
Maximum vibrations according to EN: <2 m / s2
Length: 211 mm

For the final finishing of prosthetic components
1 piece silicone sanding cone 5/8", conical
1 piece silicone sanding cone 5/8", conical, narrow
1 piece silicone sanding cone 5/8", cylindrical round with grooves
1 piece silicone sanding cone 5/8", cylindrical round
1 piece silicone sanding cone 5/8", double cone
1 stand

230V/500W
High-end quality made in Switzerland

- 100% Swiss made quality
- 60 years of expertise in making hot-air tools – brought together in the new SOLANO AT
- The sturdy, professional hot-air tool that weighs less than 1 kg/2.18 lbs
- Functional design: two-component handle grip and optimum center of gravity ensure ergonomic working
- Quick clean air filters
- Automatic carbon stop (collector protection) and heating element protection
Voltage V ~: 230
Power W: 2300
Temperature ° C: 500–650
Air quantity (20 ° C) l / min: 240
Dimensions (L × ∅) mm: 270 x 270 x 75 (45)
Weight: 750gr

real size

Upya is THE foot for you, comfortable but dynamic, stable and reassuring, it bends to your life and your desires. Upya is suitable for both tibial and femoral amputees and is also suitable for double amputees. Don't hesitate to contact our sales team if you have any questions, they are always happy to answer them." WEIGHT: 700 grams (+/- 5%)

Degree of mobility: 1-2
Height: 140mm
Material: Aluminum, Reinforced polyethylene, Fiberglass, Polyurethane foam
Size: 25 to 28cm (adaptabe)
Water resistant

Optional lock
Quick & Easy adjustable mechanism
Light-weight alloy construction