Tape measure of light quality, for everyday use. Yellow/white ribbon in polyfiber fabric with black graduation on both sides. Metal tip at both ends.
Length: 150cm
Width: 18.5mm

With hardened jaws and steel handles. Possibility of removing a handle to allow use in confined spaces.
Reinforced model. All dimensions with high quality forged steel body and solid steel handles.
□ capacity: 3 mm - 9 mm
For hand taps DIN 352: M4 - M12
For ⌀ hand reamers DIN 206: 5 mm - 10 mm
Total length: 280 mm

With hardened jaws and steel handles. Possibility of removing a handle to allow use in confined spaces.
For normal use: cast zinc body.

CRE 728

CRE 727

Packaged in a blue plastic box with pilot drills
Content :
1 set of HSS hand taps each:
DIN 352 M 3 / 4 / 5 / 6 / 8 / 10 / 12
1 HSS die of each DIN 223:
M3 / 4 / 5 / 6 / 8 / 10 / 12
HSS twist drills, DIN 338 N, ground:
Ø2.5 / 3.3 / 4.2 / 5.0 / 6.8 / 8.5 / 10.2mm
1 die holder DIN 225:
20x5 / 20x7 / 25x9 / 30x11 / 38x14
1 left hand wrench DIN 1814:
Group 1 + 2

fixedly mounted on a trapezoidal steel plate,
for mounting on a workbench or the like,
multi-stage height adjustment of the milling axis,
powerful motor with 2 turning speeds,
electromagnetic motor brake,
removable axle guard
400V / 50Hz / 2,7-3,4 kW

Square drive: 3/8 in
Total length: 200mm

T-PLATE foot pressure plate is the most accurate and cost-effective way to identify the plantar pressure profile.
Traditional tools cannot provide the same information as the T-Plate. It will increase your credibility and most of all help you make the good diagnosis.
Deliver with software and manual in English.

D100, L260mm

Dimensions and weights
595x460x527mm / 50kg
Starter: Manual start
Fuel: petrol
Tank capacity: 15 liters
Sound pressure level: 75 dB(A)
Nominal voltage: 230 V
Active power LTP: 3.8 kW
Active power COP: 3.3 kW
Generator IP degree of protection: IP 23
Socket type: 2 x 230V
Socket IP degree of protection: IP 44

Through ankle terry sock with elasticated top, manufactured in soft Cotton / Lycra®.
Cotton / Nylon / Elastic

Syme Plus' static alignment properties and 10° internal and external rotation features makes it recommendable to Syme's amputees.
Mobility degree: 1-2, Heel height: 10mm, Max. load 80kg, Material: Carbon Fiber
Include:
- Carbon Foot shell (in beige, dark brown and very dark brown color)
- Carbon Foot Stocking

PR01.K3 is a flexible and light carbon foot, specially designed for patients with a lower extremity Syme's amputation. The upper part of the foot features a carbon-fiber plate whereas the toes are composed of two carbon sheets. The foot is suitable with a steel rotating lamination anchor.
Include:
- Carbon Foot shell (in beige, dark brown and very dark brown color)
- Carbon Foot Stocking

Space requirements WxD: 1400 x 800 mm
Power requirements: 400 V / 50 Hz / 1,27 kW / 1,7 kW
Noise level: 75 dB(A)
Power cord length: 2 m
Weight: 134,000 kg
Calour: lichtgrau (RAL 7035)
Scope of delivery: with 1 Sanding belt (2500 x 50 mm), 1 round grinding plate, 2 m power cord with CEE plug
Sanding belt speed: 15/30 m/sec
Dimension upper part W x D x H: 1000 x 500 x 1622 mm
Description: left side: aluminium plane wheel 350 mm Ø, continuous, inclinable support table, folding down at the side for full use of the grinding surface, extraction connection piece 100 mm Ø to connect to a chip extraction system with a minimum air velocity of 20 m/s right side: belt tensioning arm with closed protection hood, extraction connection piece 100 mm Ø, belt length 2500 mm, belt width 50 mm with round plate, contact wheel, sanding belt

The slideable T-handle is fitted with an end-stop to ensure it does not slide out.
With swivel jointed head (torsion drive 50°, swing drive up to 90°). The swivel angle is secured by an integral spring.
Material: Chrome vanadium steel, chrome-plated.
Drive profile: Hexagon socket
Wrench length: 450 mm
Width across flats: 17 mm
Length of sliding handle: 200 mm

3 positions

also referenced under: OOMAOVENCR50S, CRM 30

2 positions

also referenced under: OOMAOVENCR55003, CRM 30.1

Casings and doors made of 0.9 mm sheet steel, shelves can be accommodated in steps of 40 mm. Reinforced doors internally and lockable by a sliding handle with cylinder lock. Complete with 4 shelves in galvanized sheet metal.
RAL 7035 light gray body, RAL 7016 anthracite doors, powder coated.
Cylinder lock
Allowable load interior cabinet body: 500 kg
Permissible shelf load / Maximum load per rack distributed over the surface (on the metal): 80 kg
Width: 950mm
Depth: 430mm
Height: 1950 mm

Equipment: Transparent suction hood, flexible suction arm with three joints, range of the suction arm 1m
Volume flow:150 m3/h
Exhaust arm tube Ø: 75mm
Exhaust hood Ø: 280mm
Weight: 2.5kg
Hinged connections colour: White

100% coton

100% coton

100% coton

100% Coton

100% coton

100% coton

Multi-component power grip. Blade of chrome vanadium steel, surface chrome-plated. Chrom-Top tips for optimum rust protection.
overall length: 82 mm
Blade length: 25 mm
for screw ⌀: 2.1 − 3 mm
Cross-head size: 1

extra strong & tear-proof, does not fuse with hot thermoplasti
well suited for compression and vacuum suction
roll 150 m x 10 cm

9x400x400mm, ethylene vinyl acetate (EVA), moldable at approx. 130-135 °C, suitable for flexible inner sockets, especially for above-knee sockets

14x400x400 mm, ethylene vinyl acetate (EVA), moldable approx. 130-135 ° C, suitable for flexible internal sockets, in particular for sockets above the knee