12x400x400mm, ethylene vinyl acetate (EVA), moldable at approx. 130-135 °C, suitable for flexible inner sockets, especially for above-knee sockets

- ethylene vinyl acetate (EVA)
- for shoe-insoles
- for water-resistant splints and supports
- for hand (metacarpus) splints and forerarm splints
- in arm prosthetics, for foot prostheses (e. g. according to Bellmann)
- for prostheses sockets

permanently elastic thermoforming film, moulding temp: 120-135 °C / 248-275 °F

permanently elastic thermoforming film, moulding temp: 120-135 °C / 248-275 °F

The Streeter was designed to ease the learning and relearning of walking. The locking system on the back wheels will prevent the Streeter from moving backwards and will encourage the user to move forward.

The system is fully reversible so that your Streeter can be used in both directions. The aluminum frame is fully collapsible which makes it excellent for transport and storage.

4 different colors represent the 4 different sizes. It suffices to pick a Streeter where the height of the handles is equal to the height of the hips of the user. Every Streeter is adjustable in height for a perfect personal solution.

S - 46-57cm / max. 50kg
M - 57-60cm / max. 65kg
L - 60-73cm / max. 80kg
XL - 72-90cm / max. 90kg

also referenced under: ETOORASP4511, CRM 94.51

Inelastic special plaster for tape bandages, suitable for limiting the movement of joints in the event of injuries. Consists of high quality inelastic adhesive fibers. Easy to tear off by hand

1 straight point; knurled metal handle.
overall length: 180 mm

D100mm

also referenced under: OOMADUSTAS04, CRM 107.2

Made of stainless steel, with return spring.
Straight jaws, plastic coated handles.
Widely applicable. Ideal for thin sheet metal, plastics, leather, cardboard, paper, cord, fabrics etc.
overall length: 140 mm
Length cutter. 30 mm

Made of folded sheet metal, 25 mm high.
Application:
As shelf and as additional bracing.
For installation between two support legs.
Colour:
RAL 7035 light grey powder-coated.
Technical Data
Material thickness 1 mm
Series KOMBI-filebænk
Width 1,340 mm
Depth 2-part 630 mm
suitable for worktop length 1,500 mm
Load capacity, distributed 300 kg

Equipment: Double doors, centrally locking, security lock, 4 height-adjustable slotted shelf inserts
Dimensions WxDxH: 950 x 400 x 1,950 mm
Material: Steel sheet
Depth: 400 mm
Weight: 75 kg
Colour: Light grey (RAL 7035)

This swivel chair with wheels is versatile: it can be used as a stool for massages, as an office chair or as a mobile seat in the workshop. The pleasantly padded seat and the comfortable backrest provide great comfort even when sitting for a long time. The seat height can be adapted to individual needs. Adopt this practical chair for your workstation!

Task chair with wheels
Mobile chair for doctor's office, hairdresser, office, studio, etc.
Height adjustable by gas spring
Pleasant seat thanks to comfortable upholstery
With comfortable backrest
Hard-wearing, easy-care seat cover
Optimal stability thanks to the 5-part base
Technical data :

Cover material: PVC leatherette
Colour: black (as illustrated)
Diameter: about 40 cm
Padding height: 8 cm
Seat height: 44 - 59 cm

The Perlon Knee Stockings with rubber band are intended for the outer cosmetic finish of modular transtibial prostheses.

The Perlon stockings with rubber band are intended for the outer cosmetic finish of modular knee disarticulation prostheses and transfemoral prostheses.

The new Multistim HT VAC is an advanced and complete universal electrotherapy device made for professional users, with built-in vacuum module.
- Low frequency currents:
biphasic, Tens, diadynamic (50-100Hz – CP, LP, 50 Hz and 100 Hz interrupted), rectangular, triangular, exponential, galvanic, galvanic interrupted, ionophoresis, faradic (triangular, rectangular, neodyn), Trabert, ultra-reiz
- Medium frequency currents:
IF bipolar, IF quadripolar, IF isoplanar, IF vectorial, MF stimulation, isodynamic, Kotz
- All the functions are visualized on a large color LCD. In addition to the usual and traditional keys and buttons, it is possible to adjust every parameter on the touchscreen.
- The versatile Windows CE operating system ensures possible upgrading.
- A wide range of preset protocols with body maps is available for setting most important therapies into the fields of physical therapy, sports medicine, orthopedics, vascular and aesthetic medicine.
- After a pathology is chosen, the screen will show the body parts to be treated and the unit will suggest the parameter values to set.
- Free memories for entering customized protocols.
- 2 independent patient circuit
- max. intensity:
• low frequency currents: 76,5 mA (153 mAp)
• medium frequency currents: 127 mA (153 mAp)
- frequency from 2,5 to 20 kHz
- vacuum module:
• continuous or pulsed mode
• double output allowing bipolar or quadripolar application
• pressure: 0,6 bar
- color touchscreen 400x800 pixels
- power supply: 115-230 V~ 50/60 Hz
- consumed power: 80 VA
- dimensions: 40 x 30 x 23 cm
- safety class: class I type BF according to IEC 601-1
- Directive EEC 93/42: IIa

3M ™ Steri-Strip ™ are adhesive, sterile, hypoallergenic and clinically safe skin bands. They consist of a TNT backing reinforced with polyester filaments, a material that allows perspiration.

3M ™ Steri-Strip ™ solves the most critical aspects of the wound healing process by ensuring rapid development of tissue resistance force, aesthetic results are optimal and the risk of infection is minimal. A simple, fast and trauma-free application opens it up.

Non-woven rayon fiber backing (TNT)
• High level of breathability: the fibers that make up the support guarantee a correct passage of air and oxygen while respecting the physiological functions of the skin by reducing the risk of maceration.

Polyester fibers
• Resistance: the band resists the tension exerted by the wound which tends to come off

Adhesive
• Hypoallergenic: it guarantees optimal tolerance of the skin and therefore less presence of allergic reactions.
• High level of grip: the level of grip develops over time
• Trauma-Free Removal: The composition prevents residue from being released and removal is easy and trauma-free.

Sterilization: gamma rays
• Product sterility allows safe use on the surgical wound

Simple stepper suited for overall condition training and rehabilitation of knees, feet, ankles, also for general relaxation of the locomotion system.

Wall bars could provide necessary support.

Version: Strong, forged design, special tough varnish; taper section (cutting part) bright metal. Slight internal taper for releasing the cut pieces.
Application: For punching or manufacturing gaskets and gasket rings of rubber, leather, felt, plastic, cork, fabric or similar materials.
Supplied with: 1 each steel wad punch ⌀ No. 832001: 15 pcs.
size 2-30
(2 mm increment)
Note: Use an underlay of wood, leather etc. when punching to avoid damage.

Technical Data
Packaging: Tool roll
Number of steel wad punches: 15
Type of product: Punching tool

Strong, forged design, special tough varnish; taper section (cutting part) bright metal. Slight internal taper for releasing the cut pieces.

steel

N°4, 12mm, 5000pcs

Height of steps: 1st step: 20 cm 2nd step: 40 cm 3rd step: 59 cm
In 18/10 stainless steel 3-step step stool Designed entirely in stainless steel to increase its longevity and facilitate total disinfection.

The blanks are forged and ground; manufactured with an exact cut of even density and depth using special machines. These non-convex files have tooth profiles appropriate to each grade of file.
Cuts on all faces; convex end.
The quality file for workshop use with long tool life and high removal rate.
Standard: DIN 7261 form D
Length without tang: 250 mm
Width: 10 mm

The blanks are forged and ground; manufactured with an exact cut of even density and depth using special machines. These non-convex files have tooth profiles appropriate to each grade of file.
Cuts on all faces; convex end.
The quality file for workshop use with long tool life and high removal rate.
Standard: DIN 7261 form D
Length without tang: 250 mm
Width: 10 mm

All faces and edges ground. Inspection test faces ground.
Application:
For accurate general workshop work.
Accuracy:
DIN 875 / 2 − angle tolerance e.g. for size 100×70 = 0.030mm.

Stainless Steel

Stainless Steel

Sturdy design with long arms, made of tool steel. Points and measuring faces ground and hardened. Solid spindle with adjusting nut for quick and fine adjustment. Annular spring provides constant spring tension.
With replaceable tips.

Sturdy design with long arms, made of tool steel. Points and measuring faces ground and hardened. Solid spindle with adjusting nut for quick and fine adjustment. Annular spring provides constant spring tension.
With replaceable tips.

260mm

Technical characteristics:
Type: SP11
Max. working pressure: 24 bar
Maximum operating temperature: 50°C
Air flow: 25 l/min
Flow at 5 bar: 25 l/min

Execution:
Spray gun with straight tube and plastic container, matt red, capacity 1 l.

Features and applications:
- GN 227.7 stamped steel handwheels have high mechanical strength and coating for increased corrosion resistance.
- They are also shock and impact resistant.
- The tapered square hole facilitates installation and proper positioning on a pin.
- Molded shape prevents injury from sharp edges when handling.
- Handwheels are stamped “SHUT” and “OPEN” for safe and correct valve handling.

Handy small spirit level. Die-cast aluminium profile. Face-milled measuring faces. Unbreakable acrylic vials (vertical + horizontal).
Additionally 360° rotating vial. Vee groove and magnet in the measuring face.

for torsion and pro-supination of the hand and the arm
dimensions: 40 x 20 x h 30 cm

also referenced under: OOMAMARP3000E, CRM 94

long. total 5m - long. work 4m
With rotating unions with bearing
at both ends, external thread. G 1/4 "
With metal crease protection

Soft ergonomic plastic handles. Special stainless steel blades (52 - 54 HRC).
Paper, cardboard, fabric, leather, rubber, rope, etc.
Total length: 250 mm

Ergonomic soft-grip handles of plastic. Blades of non-rusting stainless steel (52 - 54 HRC).
Paper, cardboard, fabric, leather, rubber, rope, etc.
Total length: 225 mm

Ergonomic soft-grip handles of plastic. Blades of non-rusting stainless steel (52 - 54 HRC).
Paper, cardboard, fabric, leather, rubber, cord, and much more.
overall length: 200 mm

Elastic paddle in stainless steel strip, flat ovoid wooden handle.

Replacement wheel with needle bearing and quick-change axle.
Technical data
⌀ wheel 20 mm
Wheel width 6.2 mm
Roll bore 7.8 mm