ENP 360°, spare part

230V, Volume 6, m³/h, Vacuum 60mbar

also referenced under: OOMAOWELPR02, CRM 3, 100.303

D100mm

also referenced under: OOMAVAPUCR10M, CRM 65

Robust and stable universal grinding machines with abrasive belt and grinding wheel for a wide range of materials
Heavy, durable industrial design with maintenance-free motor
Housing made of extruded aluminum
Large, heavy mounting flanges and thus high disc concentricity
Sanding attachment with graphite coating; prevents friction and heat
Stop allows quick and easy sanding of workpieces
Tape adjustment without tools - only adjustable with a handle screw
Universal corundum grinding wheel and sanding belt in the standard scope of delivery

also referenced under: OOMAOVENCR50K, CRM 40

120 minutes

also referenced under: OOMAOVENCR50I, CRM 29

also referred as: OOMAOPRECR75T, CRM 76

FUNCTION: Programmer, Controller
DIMENSIONS: 48 x 48 mm
DISPLAY: 1 display with 4 digit
POWER SUPPLY: 24 Vac/Vdc, 100… 240 Vac
INPUTS: 0/1… 5 V, 0/2… 10 V, 0/4… 20 mA, Pt100, PTC-NTC, Thermocouple
OUTPUTS: Relay and/or SSR control
DIGITAL INPUTS: 1, 2
INDEPENDENT TIMER: Yes
NUMBER OF PROGRAMS / SEGMENTS: 1 program with 8 segments
INTERFACE: TTL Modbus
SPECIAL FUNCTIONS: Digital retransmission, Hours/Days worked, Power on delay, Soft start, Transmitter power supply, User calibration, Wattmeter
CONTROL: ON/OFF and PID single or double action
EXTRACTABILITY: By the front
CERTIFICATIONS: CE, UL

Specially parameterized for CR5000G

also referenced under: OOMAOVENCR50RG, CRM 46, K48

also referenced under: OOMAOVENTERMO, CRM 47

ENP 220, spare part

also referenced under: OOMAOVENCR50FT, CRM 28

resistant to almost all chemicals, non-combustible, embrittled, will not crack, become crumbly or sticky, quick and clean application, for trouble-free sealing of fine threads up to 3/8 inch for almost all fluids, application range from -240 ° C to +260°C

also referenced under: OOMAVAPUCR10T, CRM 68

D100, L260mm

3 positions

also referenced under: OOMAOVENCR50S, CRM 30

2 positions

also referenced under: OOMAOVENCR55003, CRM 30.1

D100mm

also referenced under: OOMADUSTAS04, CRM 107.2

230V / 1550W

also referenced under: OOMAOWELPR01, CRM 2, 142.717

Wire cross section: 16 mm²
Coupling plug wire cross section: 25 mm²
Coupling plug arbor: 9 mm
Earth clamp: 200 A
Length cable approx: 4 m

also referenced under: EMACWELDWMCG, CRM 21

260 A- 35% ED / electrodes max. 3.2 mm
Insulated according to EN 60974-11 with break-proof insulating shells made of glass-braided material for Allen cable lug connection

also referenced under: EMACWELDWMEH, CRM 22

DIN 894, size 36mm

Dimensions (LxWxH): 320 x 270 x 825 mm
Weight (net): approx. 14.5 kg

for aspirator hose

3 positions

for 2 years maintenance

also referenced under: OOMAVAPUCR11, CRM 56.1

High-quality adhesive tape made of PVC, it is corrosion-resistant and it is also acid and alkali-resistant. Due to its high insulation resistance, the tape is ideal for use in electrical installations. The insulation adhesive tape can be used for repairs in automobile, ship, land and construction sectors without any problems.

also referenced under: OOMADUSTAS03, CRM 107.1

optional oven equipment

also referenced under: OOMAOVENCR50T, CRM 39

D 60 mm, 0-250 bars

⌀53mm

also referenced under: OOMAOPRECR75D1, CRM 71.9

slide system for loading the mold inside the press before each injection

also referenced as: OOMAOPRECR75A, CRM72

Swivel range of ± 45 °
Easy-to-read angle scale enables precise work
Seconds adjustment of the miter
Protected vise spindle
Massive machine base on both sides with holes for the mounting of the material stand MSR
Long handle allows sawing without great effort with integrated push-button (on / off)
Automatic switching on of the coolant pump when sawing
Functional protection device, closed construction, movable
Fast opening mechanism for optimum safety when cutting
Centrally exciting vise, 4-fold guided with individually adjustable clamping jaws. Cutting always takes place in optimal position to the workpiece
Massive machine base
Protected vise spindle
Machine base sizes:
- CS 275 - 460 x 515 x 775 mm and
- CS 315 - 546 x 620 x 801 mm
The saw is delivered without circular saw blade (saw blade division freely selectable)

also referenced under: OPTIsaw CS 275, CRM 115

- Ideal for sawing steel, aluminum, copper, PVC and Teflon
- Stepless, electronic speed control from 30 - 80 m / min
- Particularly quiet - up to 60% quieter than comparable band saws
- Low vibration and wear thanks to special gearbox with two large gears made of hardened steel
- Guaranteed cutting accuracy of max. 0.3 mm course over 100 mm cutting length
- Each machine individually tested for precision in Italy
- Low-speed DC drive motor with carbon brushes for up to 10 times longer life
- Electronic temperature and ampere recording monitoring against overload
- Cast strip wheels with ground running surface without rubber pads, therefore suitable for dry and wet cutting
- Massive saw bar made of die-cast aluminum (readjustable from MBS 125) and with sturdy transport lock
- Two movable, adjustable saw band guides with chip scraper made of metal
- Particularly stable base plate with non-slip feet
- Very service-friendly, as components are easily accessible

also referenced under: MBS 105, CRM 116

for bulb: E14, 40W, 240V, 550C

also referenced under: OOMAOVENCR50L, CRM 32

1 green, 1 red, 1 emergency stop

Sturdy general-purpose jigsaws with metal gearbox casings and overload protection.
With FIXTEC quick-release clamping system allows blades to be changed in seconds without any tools, and selectable orbital stroke for optimum cutting power and dust extraction combined with reduced saw blade wear.
Supplied with:
Supplied with chip break guard.
Supplied with 2 × saw blades, extraction adapter, sole plate, mains cable 4 m, carrying case.
Packaging: Carrying case
Manufacturer's designation: STEP1200XE
Power consumption: 730 W
Rate of strokes: 500 min-1 - 3,000 min-1
maximum sawn thickness steel: 10 mm
maximum sawn thickness wood: 135 mm
Mitre angle adjustment: Yes
Orbital stroke: 4-way
Weight: 2.4 kg
maximum vibration to EN: 10.5 m/s2
tool change without tools: yes, FIXTEC system

2 pieces, 1 long, 1 short

also referenced under: OOMAOPRECR75N, CRM 77

3/8" - DN10, kit of 7 pieces

also referenced under: OOMAOPRECR75B, CRM 76.1

25 liters

also referenced under: OOMAOPRECR75E, CRM 71.6

750W/220V, L=84cm

also referenced under: OOMAOVENCR50H, CRM 38

750W/220V, L=98cm

also referenced under: OOMAOVENCR50HG, CRM 45

Impact drill with high-performance motor with high torque for very heavy duty applications (drilling, working with drills, masonry hole saws and hole saws) as well as screwdriving and smoothing.

New safety handle with innovative fastening and softgrip for secure holding of the machine.
Sturdy metal gearbox for long working life.
Mechanical overload clutch Anti-rotation for high working security even for the toughest applications
Single-sleeve quick-change chuck with auto-lock for quick tool-changing using only one hand.
Rotatable brush plate for equal torque in clockwise and anti-clockwise directions.
Spindle neck ⌀ 43 mm (European standard) − can be used in drill stands.
2-speed gearbox.

Enhanced user protection by KickBack Control.

Supplied with 13 mm quick-change chuck, additional handle, depth stop 210 mm, L-BOXX 136.
Manufacturer's designation: GSB 24-2
Power consumption: 1,100 W
maximum torque: 40 N·m
Drill chuck adapter: 1/2 inch − 20 UNF
maximum speed 1st speed: 900 min-1
maximum speed 2nd speed: 3,000 min-1
maximum twist drill size ⌀ in steel: 16 mm
maximum twist drill size ⌀ in wood: 40 mm
maximum twist drill size ⌀ in concrete: 22 mm
maximum hammer rate: 15,300 min-1
Quick-clamping chuck range: 1.5 mm - 13 mm
Weight: 2.9 kg
maximum vibration to EN: 14.6 m/s2

Granulator for polypropylene, 400V/15kW, 280 à 330kg/h
This granulator machine is an essential tool for orthopedic centers looking to adopt a circular and sustainable production approach. Designed to crush and transform old prosthetics into reusable polypropylene granules, it helps reduce waste and optimize the use of existing materials.

An Eco-Friendly and Cost-Effective Process
With this granulator, centers can:
✔ Efficiently recycle used prosthetics, reducing dependency on new raw materials.
✔ Reuse the granules for manufacturing new mobility aids (crutches, orthopedic components).
✔ Lower material costs while minimizing environmental impact.

Technical Features
🔹 High processing capacity for fast and efficient production.
🔹 Powerful motor ensuring uniform crushing and optimized granule size.
🔹 Filtration system to remove impurities and ensure high-quality recycled material.
🔹 User-friendly and secure operation, suitable for orthopedic environments.

Ideal for Orthopedic Centers and Manufacturing Workshops
By integrating this machine, orthopedic centers can reduce their environmental footprint while gaining autonomy by repurposing used materials to produce new equipment at a lower cost.

also referenced under: OOMAGRAN300, CRM 78

E14 / 40W / 300° C / 230V

also referenced under: OOMAOVENCR50B, CRM 33

10 A, DO 1 GL

also referenced under: OOMAOVENCR50F10, CRM 42

2 A, DO 1 GL

also referenced under: OOMAOVENCR50F02, CRM 41

D 12cm