- Designed for demanding continuous use when oil-free and clean compressed air is required
- Air is blown through the cooling chambers of the cylinder by means of a fan; thus optimum cooling is achieved
- Large piston, movably mounted, resulting in 60% more power compared to tilt piston systems
- Cylinder running surfaces with high-precision and micro-smooth surface for minimum friction
- The high-performance piston or piston ring made of a graphite-Teflon-carbon special compound has a much longer service life than a simple piston ring made of Teflon
High-quality maximum equipment
- Filter pressure regulator for stepless adjustment of the working pressure, with simultaneous dirt, oil and condensate separation
- One compressed air outlet each for filtered compressed air, filtered and oiled compressed air and a direct outlet on the compressed air tank
- Two comfort safety quick couplings
- High-quality CONDOR pressure switch
- One pressure gauge each for container and working pressure
- Simple condensate drain via ball valve
Compressed air lines and reservoirs with long service life
- Flexible armored hose line with heat protection prevents vibration fractures
- Inside and outside hot-dip galvanized, corrosion-protected compressed air tank with 15-year guarantee against rusting through
Comfort safety quick couplings
- One-hand safety couplings according to DIN EN 983 used as standard by AIRCRAFT as first manufacturer
- Two separate locking systems for maximum working safety
- No whipping of the hose line during uncoupling
Convenient transport
- Transport back-friendly in upright position and without lifting
- Additional transport handle directly on the container
- Puncture-proof PU foam wheels
- Stable steering chassis with parking brake
TÜV-free
- Type-tested by an approved monitoring body
- Recurring container inspections also possible by a competent person
Immediately ready for use
- Fully automatic on-off operation
- With all safety devices
- Completely ready for connection

also referenced under: AIRPROFI 440/100 OF PRO, EMACAIRCO380, CRM 178

- Designed for demanding continuous use when oil-free and clean compressed air is required
- Air is blown through the cooling chambers of the cylinder by means of a fan; thus optimum cooling is achieved
- Large piston, movably mounted, resulting in 60% more power compared to tilt piston systems
- Cylinder running surfaces with high-precision and micro-smooth surface for minimum friction
- The high-performance piston or piston ring made of a graphite-Teflon-carbon special compound has a much longer service life than a simple piston ring made of Teflon
High-quality maximum equipment
- Filter pressure regulator for stepless adjustment of the working pressure, with simultaneous separation of dirt, oil and condensate
- One compressed air outlet each for filtered compressed air, filtered and oiled compressed air and a direct outlet on the compressed air tank
- Two comfort safety quick couplings
- High-quality CONDOR pressure switch
- One pressure gauge each for tank and working pressure
- Simple condensate drain via ball valve
Compressed air lines and reservoirs with long service life
- Flexible armored hose line with heat protection prevents vibration fractures
- Inside and outside hot-dip galvanized, corrosion-protected compressed air reservoir with 15-year warranty against rusting through
Comfort safety quick couplings
- One-hand safety couplings according to DIN EN 983 used by AIRCRAFT as the first manufacturer in series production
- Two separate locking systems for maximum working safety
- No whipping of the hose line during uncoupling
Convenient transport
- Transport back-friendly in upright position and without lifting
- Additional transport handle directly on the container
- Puncture-proof PU foam wheels
- Stable steering chassis with parking brake
Immediately ready for use
- Fully automatic on-off operation
- With all safety devices
- Completely ready for connection

also referenced under: AIRPROFI 220/50 OF PRO, CRM 178.3

This oil-free piston compressor is designed to provide clean and reliable compressed air for prosthetic and orthotic laboratories. The oil-free system eliminates the risk of oil contamination, ensuring safe use with thermoplastic materials, laminating processes and pneumatic equipment commonly used in P&O workshops.

The compressor provides stable air supply for daily workshop operations such as vacuum forming, thermoforming of plastics and operation of pneumatic tools.

Typical applications in P&O workshops
- Vacuum forming and thermoforming
- Operation of pneumatic tools
- Lamination processes
- General compressed air supply for orthopaedic workshops

Key features
- Oil-free piston compressor (clean compressed air)
- 2-cylinder compressor system
- Maximum pressure: 10 bar
- Air suction capacity: 240 l/min
- Filling capacity: 120 l/min (at 6 bar)
- Air tank capacity: 24 L

Electrical specifications
- Supply voltage: 230 V / 50 Hz
- Motor input power: 1.4 kW
- Motor power: 1 kW
- Duty cycle: 70 %

Noise level
- Sound pressure level: 62 dB(A) (measured at 1 m)

Dimensions & weight
- Length: 600 mm
- Width: 280 mm
- Height: 600 mm
- Net weight: 24 kg

Equipment
- Pressure regulator with automatic pressure switch
- Direct-coupled drive transmission
- Quick coupling air outlet
- Flexible armored compressed air line with heat protection
- Two transport wheels with solid rubber tyres

Designed for Orthopedics workshops
Manual height adjustment, milling shaft horizontally and vertically
adjustable, continuous speed control, M.16 milling shaft thread, adapter from M.16

Dimension : Out Side W.50—D.50—H.40 cm
Power Supply 220 Volt 50 Hz
Power cord With CEE plug 3 × 16 A and CEE socket 3× 16 A
Sound intensity level 80 dB(A)
Electrical connection 220 V 50 Hz 1500 Watt
Motor RPM Variable rotation speed, min. 0 to max. 3000 RPM
Connecting cable 3x2,5 mm2 3 mt
Router shaft length and Type 500 mm 30 to 35 mm ( Conic 220 mm )
Suction head hose 100 mm plastic ,flexible
Scope of delivery Exhaust arm with suction hood (Ø 100 mm +hose )
Color Rall 7035 & 7045
Weight Net 42 Kg

The new IR1001 COMPACT is of course equipped with the innovative optical temperature sensor and a con- troller of the next generation. Same as the larger Infrared-ovens the two-line PID-Controller keeps the user constantly updated of the preset and actual temperature values. The preselect feature allows the user to store four temperature settings which can be easily called up by use of a single button. A signal light informs the user when the set temperature is reached, even if he is not standing right in front of the control panel.

Technical Data: IR1001 COMPACT
Type: IR1001 COMPACT - Infrared Oven for the O&P field, Bench-top design
Footprint: approx. 1m²
Dimensions: Outside: W 1270 mm - D 920 mm - H 455 mm / Inside: W 1000 mm - D 800 mm - H 140 mm
Tray: tray movable full size on ball bearing guides, easy to remove without tools for fast teflon replacement, effective heating area: W 950 x D 750 mm
Power supply: 400V / 50/60Hz / 3 Phase / (16 Amp. CEE) / total capacity 7,7 kW, (other voltages available)
Heating: 12 Infrared-Quartz-tubes with reflector, Stand-by switch
Temperature control: opto-electronic IR-measuring unit, Measuring of the material´s surface temperature!
Temperature control: PID-Controller, infinitely variable from 30°C to 250°C

Technical Specifications:

Product Type: Soldering Iron
Power Supply: Mains operation
Tip Width: 3.1 mm
Heating Power: 30 W
Tip Temperature after 3 minutes: 380 °C
Suitable for copper sections up to: 2.5 mm²
Weight without power cord: 80 g
Identification and Classification Numbers:

EAN / GTIN: 4003008047004
Manufacturer's Reference: 0330KD
Description:
This industrial soldering iron is designed for exceptional longevity, equipped with Ersadur long-life tips that last 30 times longer than standard copper soldering tips. It heats up in 3 minutes, features a 1.5 m rubber power cable (ref. 30 uses PVC), and comes with a detachable iron stand (not included with ref. 30). The Ersa soldering iron also includes a clip-on iron stand for convenient and safe use.

Two separate vacuum circuits with six vacuum pickup locations, three gate valves for vacuum control, six external filters, two external water tanks, water tank also serving as a vacuum reservoir, touchscreen with timer, alarm function and warning signal for full water tank, with protective film for touchscreen 755Z44.
Dimensions W x D x H: 430 mm x 386 mm x 208 mm
Adjustable vacuum: 220 mbar (=78%)
Suction volume: 25 l/min

- Heavy professional design with high dead weight for maximum smoothness Especially quiet and precise running thanks to torsion-free machine housing
- Large dimensioned cast iron saw table, one piece, swiveling from 0 ° to + 45 ° with ground and polished surface - Patented table tilt device with handwheel and rack
- Sägebandschnellspannung
- Precision Sägebandrollenführung
- Large font rip fence
- Fast and precise cutting height adjustment via handwheel and rack with millimeter scale Safety switch for automatic shutdown when opening the door
- Large font rip fence
- Standard with angle stop
- Table tilt via rack and handwheel

also referenced under: HBS 533 S

Usage:
Designed for vacuuming chips generated from milling, planing, and sawing processes, offering improved machine efficiency and ensuring user health.

Main Features:

Fan impeller for high suction power.
High mobility thanks to standard driving equipment.
Easy fixing of bags with straps.
Dimensions and Weight:

Length: approx. 1450 mm
Width/depth: approx. 800 mm
Height: approx. 2000 mm
Net weight: approx. 48 kg
Extraction Duct Information:

Inlet nominal diameter: 150 mm
Outlet nominal diameter: 3 x 100 mm
Electrical Data:

Supply voltage: 230 V
Mains frequency: 50 Hz
Motor input power: 2.2 kW
Motor output power: 1.55 kW
Volume Flow:

Rated volume flow: 3910 m³/h
Maximum negative pressure: 1950 Pa

This pneumatic jigsaw is the ideal tool for professionals seeking performance, precision, and ease of use. Designed for demanding applications, it offers exceptional power and innovative features, suitable for a variety of materials.

Key Features:
Outstanding Cutting Performance:

Cutting depth in wood: 85 mm
Cutting depth in plastic: 30 mm
Cutting depth in mild steel: 10 mm
Cutting depth in aluminum and non-ferrous metals: 15 mm
Power and Efficiency:

High cutting speed at 2,200 strokes/min.
Output power of 400 W for clean and precise cuts.
Optimized air consumption at 17.5 l/s under load.
Ergonomic and Practical Design:

Lever switch for easy control and intuitive use.
SDS system for quick, tool-free blade changes.
Secure guidance with a mushroom handle for precise and comfortable handling.
Lightweight at only 1.9 kg to reduce fatigue during prolonged use.
Compatibility and Durability:

Thread size: 1/4"-NPT.
Required inner hose diameter: 10 mm.
Compact dimensions for easy storage: 210 x 280 x 85 mm.

Dimensions (WxDxH): 300 x 600 x 1100 mm
Weight: 55,000 kg
Description: Clear height 450 mm, without milling cushion

The very popular gravity-feed spray gun with round and flat jet, metal gravity cup, stainless steel nozzle, air consumption 200 - 350 l/min at 3-4.5 bar.
Application: Proven spray gun for universal use.

Power Input:

Compatible with AC/DC input
230 V AC
Features:

CE compliant
Timer DS control with integrated electronic timer (0-99.59 hrs) and continuous operation
Packaging:

Sold in packs of 1 unit
Operating Parameters:

Temperature range: 10°C above room temperature up to 300°C
Internal Chamber Capacity:

Volume: 259 L
Internal Dimensions:

L × W × H: 515 mm × 650 mm × 780 mm
Width × Depth × Height: 650 mm × 515 mm × 280 mm
Weight:

87 kg

1 x for leg lasts up to 300 mm (right)
1 x for leg lasts up to 450 mm (left)
Includes 1 full cushion and 1 semi-high ortho-cushion
Equipped with air connection, pressure reducer, and manometer, compressed air filter
WBI 180/18 oil-free compressor unit
220-230 Volt, 1 Ph, 50 Hz
2m cable, plug, and motor with motor protection switch
Paint finish: RAL 7035/7037 = Light Grey / Dark Grey

Heavy, solid cast construction
Dirt and water resistant, easy to clean membrane keypad
Electronics 24V DC
Electrical quill feed
Depth stop
Threading attachment
Machine light integrated in the drill head
Large, height-adjustable protective screen with safety switch for maximum protection of the user
Large dimensioned, solid drill table, precisely worked with parallel T-slots and circumferential cooling water channel, strongly ribbed on the back, tiltable ± 90 ° sideways
Motorized rotary table height adjustment
Coolant system and external coolant tank can be removed for easy and complete emptying
Chip filter according to Machinery Directive
Extremely stable, thick-walled cast-iron column for high power consumption
Solid base plate with parallel T-slots, precision surface finish
Optional foot switch for switching between clockwise and anticlockwise rotation and for thread cutting

Dimensions:
400 x 300 x 250 mm
Inner diameter:
300 – 550 mm

including silicone sealing ring and assembly parts

The Stand for Deep Drawing Frame Type A (Article Number 07-134) enables the safe use of blister forming deep drawing frames without their own legs, e.g., Article 07-132. The width is individually adjustable, ensuring flexible adaptation to various oven models.
Dimensions: 400 x 300 x 250 mm
Inner diameter: 300 – 550 mm