1000x1600mm

1000x1600mm

1000x1600mm

1000x1600mm

1000x1600mm

1000x1600mm

1000x1600mm

1000x1600mm

1000x1600mm

1000x1600mm

1000x1600mm

1000x1600mm

1000x1600mm

1000x1600mm

1000x1600mm

1000x1600mm

1000x1600mm

1000x1600mm

1000x1600mm

1000x1600mm

1000x1600mm

1000x1600mm

1000x1600mm

with riveting hole, length 680mm
74-01002

Dimensions WxDxH: 850 x 500 x 1140mm
Weight: 83,000kg
Max. stitch length: 5mm
Sewing speed: max. 300 stitches
Needle system: 332 L LG, 332 LG
Footprint: 1000 x 750mm
max. presser foot stroke: 12mm

74-00742

74-00873

Tape measure of light quality, for everyday use. Yellow/white ribbon in polyfiber fabric with black graduation on both sides. Metal tip at both ends.
Length: 150cm
Width: 18.5mm
74-00889

for inserting eyelets, hooks, push buttons, etc. also for punching with thread adaptor (Daude) for upper puncher, radius=150mm
OHDWRIVETMAC

Compact unit to provide vacuum for two Lamination work-places (4 separate inlets) +
1 direct-connection for vacuum supply, with integr. vacuum-pump + Vacuum-tank / 6m³/h / -0,8bar
Type: Laminating device TLV6-II
Vacuum-Pump: 6 m3/h / oil- and maintenance-free / end-vacuum 200mbar
Inlet / connections: 4x 8mm, separately switchable, 1x DIN coupling for vacuum supply etc.
Filter: dust-filter, per inlet
Vacuum automatic: standard
Power supply: 230V / 50Hz
Dimensions: W 435 x D 390 x H 240 mm
Weight: 22 kgs

743S1=40

diam. 125mm, 0.5l
OTOOPLAPPB05
74-00853

Closed, pre-stretched line. ≥ M3 with GUN entry on both sides for easy threading and clean chip evacuation in the cutting direction. Entry on 2 nets. Ground and nitrided, rake angle approx. 15 °.
Thread size: M6
Thread Type: M
Side angle: 60 °
Tool type: HSS E
Tolerance class: DIN 13 6g
Cutting direction: straight
Pitch: 1mm
⌀ outer: 20mm
Height: 7mm

Closed, pre-stretched line. ≥ M3 with GUN entry on both sides for easy threading and clean chip evacuation in the cutting direction. Entry on 2 nets. Ground and nitrided, rake angle approx. 15 °.
Thread size: M5
Thread Type: M
Side angle: 60 °
Tool type: HSS E
Tolerance class: DIN 13 6g
Cutting direction: straight
Pitch: 0.8mm
⌀ outer: 20mm
Height: 7mm

Strong octagonal shank, bright finished point. Uniformly through hardened over the entire length. Head specially annealed to prevent splintering.
Safety tested to DIN 7255.
Material: Chrome vanadium air hardening steel, painted. Head annealed.
overall length: 120 mm
Shank ⌀: 10 mm
Type of striking head: annealed
Material: Chrome vanadium air hardening steel
Surface: painted
74-00847

Octagonal shank, bright finished head. Head specially annealed to prevent splintering.
Chrome vanadium air hardened steel, painted surface.
1 each rivet snap setter: Size 2; 3; 4; 5; 6
74-00840

Octagonal body, uncoated head. The special treatment of the head prevents splinters
74-00845

L-form shaft to DIN ISO 2936 L, end faces squared and chamfered. Chrome vanadium steel, through hardened (toughened).
Surface manganese phosphated.
1 each L-wrench No. 626125: Size 1.5; 2; 2.5; 3; 4; 5; 6; 8; 10
Storage in: Plastic clip

Description
Content:
Assorted bits blades C6.3 (1/4 inch); 1 coupling shank.
Content table use:
30 bits set 1/4 inch C6.3, length 25 mm: gs_profil_phillips 1 pc. each size 1; 2; 3
gs_profil_pozidriv 2 pcs. each size 1; 2; 3
gs_profil_schlitz 1 pc. each size 4; 5; 6.5
gs_profil_torx 2 pcs. each size TX10; TX20; TX40
gs_profil_torx 3 pcs. each size TX15; TX25; TX30
gs_profil_6kant 1 pc. each size 4; 5; 6
1 adapter: 1/4 inch gs_profil_4kant-einsatz – 1/4 inch gs_profil_6kant-einsatz
Adapter: 1 pc.

Bow made of oval, varnished steel tube with clamping lever. Saw blade made of original Swedish steel. With hardened tooth tips. Precision ground and exactly set.
Rip-toothed (HZ) 4 teeth before the raker − always sharp. For all types of wood, particularly green wood.
Tooth profile: Rip-toothed
Blade length: 760 mm
Blade height: 18 mm