• Raw material
  • Chemical components
  • PVA Bags & Rolls
  • Buckles, Straps, Rivets
  • Transfer paper
Register to see prices 0.0 USD
Soft Copacryl resin, 4.9kg
Acrylic resin is very fluid, allowing, in combination with COPACRYL Jersey or COPACRYL Carbon resins, to add flexibility to composite parts.

The Soft resin cannot be used alone and must be incorporated into the Jersey or Carbon resin at a ratio of 10 to 30% to add flexibility to the fabricated device.

The polymerization of this resin occurs at room temperature by adding our SIPACRYL powder hardener, at a maximum ratio of 2% to 3% by weight compared to the amount of resin.

Combining COPACRYL Soft resin with Jersey or Carbon resins yields composite parts with the following characteristics:

Excellent mechanical properties
Very good skin tolerance
Ability to be thermoformed after curing (within the elasticity limits of the reinforcement fabrics used)
Can also be used with our natural reinforcements ORTHOFLAX®, ECO-BLACK, and HYBRIDS.
Register to see prices 0.0 USD
Cellona skin protection Cream Tube, 100ml
Directions
- Protection cream and skin care in high demand
- in case of contact with aqueous solutions, surfactants, alkaline solutions
- when handling plasters or substances insoluble in water, e.g. oils and lacquers.

Properties
- Oil-in-water emulsion
- pH neutral
- moisturizing
- quick to put on
- has a regulating effect on the water balance and elasticity of the skin
promotes regeneration
- Protects against water, fluids, dirt, chemicals or detergents
Register to see prices 0.0 USD
3M Multipurpose Spray Glue - 77, 500ml
Product Description
- A high tack, high coverage and fast drying adhesive.
Product Features
• A high tack, high coverage fast drying, transparent adhesive for permanently attaching foils, carpeting, many
lightweight foams, paper, cardboard, felt and cloth to painted or unpainted metals, wood, hardboard and other
base materials.
• It provides high initial "grab" with su􀉣cient open time to allow for positioning of materials.
• Low soak-in gives better looking and higher coverage bonds.
• Soft, non-dimpling glue lines
Register to see prices 0.0 USD
Register to see prices 0.0 USD
Register to see prices 0.0 USD
Register to see prices 0.0 USD
Plastic acrylic resin (non-toxic), 7.5kg
Plastic acrylic resin (non-toxic), pigment dye. Clean tools with water. High hardness, low shrinkage. Protective varnish for the exterior. Practical working time 20 to 30 min. Setting time 45 to 60 min. Dosage 2 for 1, 100 g / 50 g, variable depending on the application. Consumption 200 to 300 ml per m². Realization of decorative or technical elements by molding, laminating or projection. Interior and exterior decor panel. Application in casting or in lamination with fabric + fiberglass reinforcement. Direct molding on polystyrene / bodywork. Clean use, non-toxic, durable over time, low water permeability. Supplied with: 1 Part B bottle.
Dry milk-white color.
Register to see prices 0.0 USD
Chopart Bonding Kit PE
Content:
Urethane Bonding Component A
Urethane Bonding Component B
Chopart PU, Set Small Parts
V.A. Chopart Sohlen/Bonding Kit
Primer for Chopart Bonding
Register to see prices 0.0 USD
Register to see prices 0.0 USD
Repositionable 3M Spray Adhesive
The 3M spray adhesive is versatile and ideal for the reliable, clean and fast bonding of large areas. It is ideal for optimizing complex production processes and simplifying everyday work in almost all craft and industrial sectors. It is also suitable for everyday use at home. It eliminates the need for brushes, spray guns and other tools. The spray adhesive is free from silicone and chlorinated solvents. The optimal spray distance is 30 cm
Register to see prices 0.0 USD
Thread sealant stick Loctite 561
These sealants replace hemp, sealing tapes, and pastes, they are resistant to gases, liquids, air, water, oils, hydrocarbons and many chemical products. Complete surface contact ensures a 100% seal. Unscrewing, or correction of position during assembly can be performed using conventional tools at any time before the sealant hardens. No sealant residues to block filters and valves.
The stick with pasty sealant is economical in consumption, no drips after use.
Application:
Improved bonding of suckers.
Note:
Before applying sealant, clean the threads with general-purpose cleaner
Labelling of hazardous substances: GHS07 Caution
Content of stick: 19 g
Colour of sealant: orange
minimum break-away torque: 5.8 N·m
Temperature range: -55 °C - 150 °C
for thread size M to: M80
for imperial thread size: 3 inch
Strength for disassembly: low
fluorescent:no
Register to see prices 0.0 USD
Separating Lubricant PTFE
When sprayed, the Teflon ™ / PTFE microparticles ensure clean dry lubrication without oil-covered hands, adhesive protection and effective reduction of static, dynamic and rolling friction.
Dry lubrication and hygienic solid.
No adhesion of dirt and dust on the treated surface.
No formation of annoying lubricant residues.
Oil and fat free.
Hygienic, clean and ecological.
Durable and resistant lubrication and sliding effect.
Resin-free, non-hardening.
High material compatibility (all metal and plastic parts!).
Silicone and acid free.
Execution: Aerosol can
Content: 0.4 l
Color: transparent
Boiling point: 78 ° C
Flash point: -104 ° C
Auto-ignition temperature: 400 ° C
Water solubility: insoluble
Signaling of hazardous substances: SGH02 Flammable
Class of dangerous goods: 2.1
UN number: UN1950
Register to see prices 0.0 USD
Silicone grease, 1000g
Color white-transparent, water and oil resistant, resistance to the action of most chemicals, NLGI consistency class 2-3, -40 ° C - + 200 ° C, non-toxic.
For lubrication between metal and plastic or metal and elastomer, lubricating grease for valves, O-rings and ball valves
Register to see prices 0.0 USD
Silicone grease, 100g
Color white-transparent, water and oil resistant, resistance to the action of most chemicals, NLGI consistency class 2-3, -40 ° C - + 200 ° C, non-toxic.
For lubrication between metal and plastic or metal and elastomer, lubricating grease for valves, O-rings and ball valves
Register to see prices 0.0 USD
Microballon, 1000g
To lighten resins and save material
Register to see prices 0.0 USD
Loctite® 243 thread locking glue, 50ml
The use of thread lockers prevents unintentional detachment and loosening of screw connections. One-component anaerobic adhesives are suitable for all types and shapes of threads. The screw connections are sealed. Reliably prevent slipping.
Liquid thread lock.
Weak tightening - Loosening possible with a normal tool.
Medium tightening - Loosening still possible with a normal tool.
Very strong tightening - Loosening only possible with a special tool or by heating (> 150 ° C).
Medium resistance, serves as a thread lock while ensuring tightness.
Manufacturer no .: 243
Chemical basis: Dimethacrylate ester
Dynamic viscosity: 1'300 mPa · s - 3'000 mPa · s
Density: 1.15 g / cm³
Flash point: 93 ° C
Temperature range: -55 ° C - 180 ° C
Maneuverability after: 10 min
Usable after: 2 h
Property: thixotropic; fluorescent under UV light; waterproof; oil resistant; vibration resistant; prevents seizure
for material: Metal
for applications: Threadlockers; Grouting; Universal use
For thread sizes M up to: M36
Resistance class: Medium
Minimum initial breakaway torque: 26 N m
Disassembly: with normal tool
Blue color
Capacity: 50 ml
Storage temperature: 8 ° C - 21 ° C
Shelf life from date of manufacture: 24 mo
Hazardous Substance Markings: SGH07 Warning; SGH09 Environmental hazard
Dangerous goods class: 9
UN number: UN3082
Register to see prices 0.0 USD
Loctite® 290 thread locking glue, 50ml
The use of thread lockers prevents unintentional detachment and loosening of screw connections. One-component anaerobic adhesives are suitable for all types and shapes of threads. The screw connections are sealed. Reliably prevent slipping.
Liquid thread lock.
Use:
Weak tightening - Loosening possible with a normal tool.
Medium tightening - Loosening still possible with a normal tool.
Very strong tightening - Loosening only possible with a special tool or by heating (> 150 ° C).
For small screws up to M6 and for subsequent screw locking.
Manufacturer no .: 290
Chemical basis: Dimethacrylate ester
Dynamic viscosity: 20 mPa s - 55 mPa s
Density: 1.07 g / cm³
Flash point: 93.3 ° C
Temperature range: -55 ° C - 150 ° C
Maneuverability after: 20 min
Usable after: 3 h
Property: High capillarity; fluorescent under UV light; waterproof; oil resistant; vibration resistant; prevents seizure
for material: Metal
for applications: Threadlockers; Grouting; Porosity of weld seams; Porosity of cast iron and sintered metal parts; Pre-assembled screw connections
For thread sizes M up to: M6
Resistance class: Medium
Minimum initial breakaway torque: 10 N m
Disassembly: only by heating
Green color
Capacity: 50 ml
Storage temperature: 8 ° C - 21 ° C
Shelf life from date of manufacture: 29 mo
Hazardous substances marking: SGH07 Warning

Register to see prices 0.0 USD
Loctite® glue 601 fixing product, 50ml
High strength, dimethacrylate ester-based retaining compound with medium cure speed and low viscosity; suitable for filling small gaps.LOCTITE® 601 is a green, anaerobic, low viscosity, medium cure speed, dimethacrylate ester-based retaining compound suitable for a max. diametrical clearance of 0.1 mm. It is a high strength product for applications that require a permanent bond. Fixture time on steel is 25 min and service temperature from -55ºC to +150ºC. Fluorescence allows product presence to be monitored.

1-part product, requires no mixing
Medium cure speed
High strength for permanent bonds
Low viscosity, small gap filling
Fluoresces for presence monitoring
Register to see prices 0.0 USD
Loctite® 401 super glue, 20ml
Universal use for joining various materials. Fast hardening and clean, almost invisible assemblies. Cures under the effect of ambient humidity.
Universal quick glue for almost the majority of materials, such as plastics, elastomers, metals, ideal for paper, cardboard, wood, leather and fabrics.
Manufacturer no .: 401
Chemical basis: Ethyl cyanoacrylate
Dynamic viscosity: 70 mPa s - 110 mPa s
Density: 1.05 g / m3
Form: liquid
Temperature range: -40 ° C
Maneuverability after: 5 s - 10 s
for material: Fabric; Wood; Plastic; Leather; Metal; Paper; Elastomers; Glass
Maximum deviation: 0.15 mm
Tensile and shear strength: 20 N / mm²
Color: transparent
Capacity: 20 ml
Storage temperature: 2 ° C
Shelf life from date of manufacture: 24 mo
Hazardous substances marking: SGH07 Warning
Dangerous goods class: 9
UN number: UN3334
Register to see prices 0.0 USD
Hardener for foam, ASTI-B
Hardener for pedilen foam
Register to see prices 0.0 USD
Rigid foam, ASTI-OP 700
Very stable and rigid foam to fabricate positive moulds and models subject to high mechanical load, for example lasts for shoes and insoles as well as tip additions.
- expansion factor: approx. 1.4
- density: approx. 700kg/m³
- good nailable
Register to see prices 0.0 USD
Rigid foam, ASTI-OP 300
Light rigid foam
- expansion factor: approx. 5.0
- density: approx. 300kg/m³
- limited mechanical strength
Register to see prices 0.0 USD
Register to see prices 0.0 USD
Hardener for foam, ASTI-B
Hardener for pedilen foam
Register to see prices 0.0 USD
Rigid foam, ASTI-OP 100
Light rigid foam
- expansion factor: approx. 5.0
- density: approx. 100kg/m³
- limited mechanical strength
Register to see prices 0.0 USD
Rigid foam, ASTI-OP 300
Light rigid foam
- expansion factor: approx. 5.0
- density: approx. 300kg/m³
- limited mechanical strength
Register to see prices 0.0 USD
Hardener for foam, ASTI-B
Hardener for pedilen foam
Register to see prices 0.0 USD
Rigid foam, ASTI-OP 700
Very stable and rigid foam to fabricate positive moulds and models subject to high mechanical load, for example lasts for shoes and insoles as well as tip additions.
- expansion factor: approx. 1.4
- density: approx. 700kg/m³
- good nailable
Register to see prices 0.0 USD
Rigid foam, ASTI-OP 200
Light rigid foam
- expansion factor: approx. 5.0
- density: approx. 200kg/m³
- limited mechanical strength
Register to see prices 0.0 USD
Register to see prices 0.0 USD
Register to see prices 0.0 USD
Register to see prices 0.0 USD
Register to see prices 0.0 USD
Register to see prices 0.0 USD
Register to see prices 0.0 USD
Sealing resin, 0,9kg
Glass-hard resin with very good adhesive properties
Register to see prices 0.0 USD
Schein-Orthofix adhesive K 20, 4kg
For adhering, especially EVA foam and many textiles
Register to see prices 0.0 USD
Register to see prices 0.0 USD
Resacryl lamination resin 80:20, 4,6kg
Transparent, thermoplastic skin-friendly, can be mixed with all other RESACRYL acrylic resins. Cuing by means of approx. 1 – 3 % hardener powder.
Register to see prices 0.0 USD
MOLD MAX™ 30/2, 5kg
MOLD MAX™ RTV silicone rubbers will reproduce the finest detail and are suitable for a variety of industrial and art related applications including making molds for reproducing prototypes, furniture, sculpture and architectural elements. MOLD MAX™ silicones can also be used to cast a variety of materials including wax, gypsum, low melt alloys/metals and urethane, epoxy or polyester resins (without using a release agent).
Register to see prices 0.0 USD
Register to see prices 0.0 USD