• Hammers
  • Abrasive
  • Knives
  • Orthopedic tools
  • Scissors
  • Scewdrivers
  • Pliers
  • Wrenches
  • Files, Rasps
  • Saws
  • Drill bit
  • Measuring tools
Paper and fabric scissors 200mm
Strong, very long, and slim blades; fully nickel-plated. Made of stainless steel.
Paper, fabric, thin material, and much more.
overall length: 200 mm
Register to see prices 0.0 USD
Spare wheel for TubiX® pipe cutters
Replacement wheel with needle bearing and quick-change axle.
Technical data
⌀ wheel 20 mm
Wheel width 6.2 mm
Roll bore 7.8 mm

Register to see prices 0.0 USD
TubiX® pipe cutter, with quick adjustment, 6-35mm
Lightweight and durable magnesium metal body with needle bearing and thumbwheel guide rollers. Hand deburrer retractable in the body. With spare rollers.
Advantages):
Automatic hold and tightening on the tube thanks to the quick one-hand QuickLock adjustment.
Quick and precise positioning of the wheel according to different tube diameters.
Use:
Universal for cutting thin-walled stainless steel, copper and aluminum tubes (up to 2 mm thick).
Technical data
For ⌀ ext. pipe: 6mm - 35mm

Register to see prices 0.0 USD
Pipe cutter with 1 cutter wheel for steel pipes 2 inch
Body of stainless steel drop forged. Wear-resistant spindle with plastic handle. Cutter wheel for steel pipes of stainless steel, accurately hardened for long tool life. Guide rollers of special steel; chrome-plated.
For clean and right-angled cutting off of pipes.
The external burr is rolled over automatically when cutting. The cut pipe end is immediately ready for thread cutting.
Cutter wheel: ⌀32 mm
Cutter wheel width: 19 mm
Cutter wheel bore: 9 mm
for pipe outer: ⌀1/8 − 2 inch
Number of guide rollers: 2
Number of cutter wheels: 1
Register to see prices 0.0 USD
Mortise chisel with wooden handle 16 mm
Long style with wide chamfer; forged; ground bright finish. Each chisel is tested for hardness and edge holding properties.
Material: Top quality special steel with wooden handle.
overall length: 250 mm
Blade width: 16 mm
Register to see prices 0.0 USD
Mortise chisel with wooden handle 10 mm
Long style with wide chamfer; forged; ground bright finish. Each chisel is tested for hardness and edge holding properties.
Material: Top quality special steel with wooden handle.
overall length: 235 mm
Blade width: 10 mm
Register to see prices 0.0 USD
Mortise chisel with wooden handle 6 mm
Long style with wide chamfer; forged; ground bright finish. Each chisel is tested for hardness and edge holding properties.
Material: Top quality special steel with wooden handle.
overall length: 215 mm
Blade width: 6 mm
Register to see prices 0.0 USD
Patterns snips with 2-component handles 260mm
Micro-serrated. Snip jaws made of stainless steel (HRC 58 − 60), handles of sheet steel, nickel plated. 2-component handle with non-slip insert of soft material, easy on the hand.
Cutting capacity: Metal sheets up to 1.8 mm, stainless steel sheets up to 1.2 mm.
Application:
For curved and short straight cutting.
Register to see prices 0.0 USD
Multi-purpose shears angled 190 mm
Made of stainless steel, with return spring.
Offset jaws, plastic coated handles.
Widely applicable. Ideal for thin sheet metal, plastics, leather, cardboard, paper, cord, fabrics etc.
overall length: 190 mm
Length cutter: 40 mm
Register to see prices 0.0 USD
Straight combination scissors 190 mm
Made of stainless steel, with return spring.
Straight jaws, plastic coated handles.
Widely applicable. Ideal for thin sheet metal, plastics, leather, cardboard, paper, cord, fabrics etc.
overall length: 140 mm
Length cutter. 30 mm
Register to see prices 0.0 USD
Register to see prices 0.0 USD
Register to see prices 0.0 USD
Register to see prices 0.0 USD
Register to see prices 0.0 USD
Register to see prices 0.0 USD
Register to see prices 0.0 USD
Register to see prices 0.0 USD
Paper and fabric scissors 250mm
Strong, very long, and slim blades; fully nickel-plated. Made of stainless steel.
Paper, fabric, thin material, and much more.
overall length: 250 mm
Register to see prices 0.0 USD
Paper and fabric scissors 180 mm
Robust blades. Made of stainless steel
Register to see prices 0.0 USD
Special steel scissors 250 mm
Soft ergonomic plastic handles. Special stainless steel blades (52 - 54 HRC).
Paper, cardboard, fabric, leather, rubber, rope, etc.
Total length: 250 mm
Register to see prices 0.0 USD
Special steel scissors 225mm
Ergonomic soft-grip handles of plastic. Blades of non-rusting stainless steel (52 - 54 HRC).
Paper, cardboard, fabric, leather, rubber, rope, etc.
Total length: 225 mm
Register to see prices 0.0 USD
Special steel scissors 200 mm
Ergonomic soft-grip handles of plastic. Blades of non-rusting stainless steel (52 - 54 HRC).
Paper, cardboard, fabric, leather, rubber, cord, and much more.
overall length: 200 mm
Register to see prices 0.0 USD
Scissors for synthetic fibers 210mm
For cutting TF sleeves, sleeves with textile coating
Register to see prices 0.0 USD
Scissors for aramid fibers 200mm
Fabric shears with micro toothing and ergonomic 2-component handles. Blades of stainless steel.
Glass fibre, aramides, and many more
Length blade: 85mm
overall length: 200mm
Register to see prices 0.0 USD
Steel wad punch set 2-30mm
Version: Strong, forged design, special tough varnish; taper section (cutting part) bright metal. Slight internal taper for releasing the cut pieces.
Application: For punching or manufacturing gaskets and gasket rings of rubber, leather, felt, plastic, cork, fabric or similar materials.
Supplied with: 1 each steel wad punch ⌀ No. 832001: 15 pcs.
size 2-30
(2 mm increment)
Note: Use an underlay of wood, leather etc. when punching to avoid damage.

Technical Data
Packaging: Tool roll
Number of steel wad punches: 15
Type of product: Punching tool
Register to see prices 0.0 USD
Register to see prices 0.0 USD
2-20mm Arch Cutter Sets
Powerful forged shape, special wear-resistant varnish; uncoated edge. Slightly tapered interior to eliminate cutouts.
For drilling or making gaskets or sealing rings in rubber, leather, felt, plastic, cork, fabric or similar materials.
1 arch cookie cutter each: 19 pieces Ref. 2-20
Number of arch cutters: 19
Register to see prices 0.0 USD
Hand-operated shears
Sturdy shears body of quenched and tempered steel. Moving blade guides free of play (with low friction losses), blades of special tool steel, specially hardened and ground. Lever arm with counterweight spring for protection in the event of accidents, all pivot pins adjustable, all models with steplessly adjustable clamping arm.
With compound action. Cuts sheet metals and round steel bar.
-The following specifications are required for subsequent orders of spare blades: Make, model, and, if known, the machine number or accurate scale drawing.
-Please note: The indicated cutting performance is a maximum. If sustained use at the maximum cutting performance is required, we recommend the next larger model.
-Cutting performance specifications refer to materials of 450 N/mm2 tensile strength.
Cutting capacity sheet thickness: up to 5 mm
Cutting capacity round steel bar ⌀: up to 11 mm
Upper blade length: 173 mm
Lower blade length: 150 mm
Register to see prices 0.0 USD
Steel wad punch
Strong, forged design, special tough varnish; taper section (cutting part) bright metal. Slight internal taper for releasing the cut pieces.
Register to see prices 0.0 USD