3/8" - DN10, kit of 7 pieces

also referenced under: OOMAOPRECR75B, CRM 76.1

25 liters

also referenced under: OOMAOPRECR75E, CRM 71.6

400V/3500W/9.2Amps

also referenced under: OOMAOPRECR75, CRM 71

750W/220V, L=84cm

also referenced under: OOMAOVENCR50H, CRM 38

750W/220V, L=98cm

also referenced under: OOMAOVENCR50HG, CRM 45

Impact drill with high-performance motor with high torque for very heavy duty applications (drilling, working with drills, masonry hole saws and hole saws) as well as screwdriving and smoothing.

New safety handle with innovative fastening and softgrip for secure holding of the machine.
Sturdy metal gearbox for long working life.
Mechanical overload clutch Anti-rotation for high working security even for the toughest applications
Single-sleeve quick-change chuck with auto-lock for quick tool-changing using only one hand.
Rotatable brush plate for equal torque in clockwise and anti-clockwise directions.
Spindle neck ⌀ 43 mm (European standard) − can be used in drill stands.
2-speed gearbox.

Enhanced user protection by KickBack Control.

Supplied with 13 mm quick-change chuck, additional handle, depth stop 210 mm, L-BOXX 136.
Manufacturer's designation: GSB 24-2
Power consumption: 1,100 W
maximum torque: 40 N·m
Drill chuck adapter: 1/2 inch − 20 UNF
maximum speed 1st speed: 900 min-1
maximum speed 2nd speed: 3,000 min-1
maximum twist drill size ⌀ in steel: 16 mm
maximum twist drill size ⌀ in wood: 40 mm
maximum twist drill size ⌀ in concrete: 22 mm
maximum hammer rate: 15,300 min-1
Quick-clamping chuck range: 1.5 mm - 13 mm
Weight: 2.9 kg
maximum vibration to EN: 14.6 m/s2

Granulator for polypropylene, 400V/15kW, 280 à 330kg/h
Blades made of high-resistant steel ensuring longest usage times
Hopper, cutting chamber, and discharging base are separable for convenient cleaning, parts replacement, and maintenance
Double sound-insulation device in the cutting chamber reducing noise to the minimum
Motor over-load protection and interlocking device well protecting machine itself and ensuring operator safety
Blades can be sharpened for several times after getting blunt to extend blades’ lifespan and save cost

also referenced under: OOMAGRAN300, CRM 78

E14 / 40W / 300° C / 230V

also referenced under: OOMAOVENCR50B, CRM 33

10 A, DO 1 GL

also referenced under: OOMAOVENCR50F10, CRM 42

2 A, DO 1 GL

also referenced under: OOMAOVENCR50F02, CRM 41

D 12cm

also referenced under: OOMAVAPUCR10R, CRM 67

also referenced under: OOMAVAPUCR10H, CRM 61

also referenced under: OOMAVAPUCR10C, CRM 69

also referenced under: OOMAOVENCR50FC, CRM 36

Length approx: 280 mm
Width/depth approx: 125 mm
Height approx: 140 mm
Weight approx: 2.3 kg
Supply voltage: 230 V
Mains frequency: 50/60 Hz
Electrode: 4.2 kVA
Electrode: 5 – 150 A
TIG DC: 5 – 150 A

also referenced under: OOMAOWELMA01, CRM 11, PRO-STICK 161

400W, 2 pieces

also referenced under: OOMAOPRECR75F, CRM 71.3

includes 2 thermoregulatore and 2 probes

- Industrial engine
- Easy to use safety switch according to IP 54
- Digital drilling depth and speed indicator integrated in the housing
- Separate emergency stop impact switch
- Precision Spindle bore
- Safety electronics in 24 V DC
- Guaranteed concentricity measured less than 0.02 mm in the drill quill
- Drill spindle with precision ball bearings
- High quality keyless chuck
- Depth stop
- Precision machined, stable drill table with diagonal T-slots and circumferential cooling water channel
- V-belt cover with safety switch
- One piece cast aluminum die-cast quill lever with softgrip handles
- Large, height-adjustable protective screen with safety switch
- Heavy version of the entire machine

also referenced under:: OPTIdrill D 23Pro (230 V), EMACDRILC150, CRM 158

Column diameter: 80 mm
Length approx: 715 mm
Width/depth approx: 360 mm
Height approx: 1640 mm
Weight approx: 85 kg
Drilling performance steel (S235JR): 25 mm
Continuous drilling performance steel (S235JR): 20 mm
Workspace length: 320 mm
Workspace width: 290 mm
T-groove type: diagonal
T-groove size: 14 mm
Rotation: 360 °
Angle: ± 45 °
Max. distance spindle - drilling table: 720 mm
Supply voltage: 400 V
Mains frequency: 50 Hz
Max. distance spindle - machine base: 1230 mm
Work area length: 385 mm
Work area width: 260 mm
Spindle motor drive output: 0.75 kW
Speed range: 200 - 2440 min¯¹
Number of gears: 12 Stages
Speed control: manually
Quill stroke: 85 mm
Spindle chuck: MT 3
Reach: 210 mm

10 meters of joint with 1x silicone cartridge

also referenced under: OOMAOVENCR50G1, CRM 46.1

for elbow child L = 17cm

also referenced under: OOMAMOULEC17, CRM 80

for elbow adult L = 23 cm

also referenced under: OOMAMOULEC23, CRM 81

for children's elbow L = 27cm

also referenced under: OOMAMOULEC27, CRM 82

also referenced under: OOMAMARP3000M, CRM 88

KM DILEM-10, relais TRP 614

also referenced under: OOMAOVENCR50N, CRM 31

2.2 kW

also referenced under: OOMAOVENCR50FR, CRM 37

also referenced under: OOMAOWELAIRTC CRM 2.1, 100.645

BE 220/240/3001

also referenced under: OOMAOVENCR50E, CRM 35

D100mm

also referenced under: OOMAVAPUCR10P, CRM 63

also referenced under: OOMAVAPUCR10D, CRM 64

also referenced under: OOMAVAPUCR10B, CRM 62

also referenced as: OOMAOPRECR75P, CRM 74

also referenced under: OOMAVAPUCR10V, CRM 60

D 325/L 600mm

Bosch cordless drill / driver

Compact, powerful cordless drill with forward/reverse operation.
Long service life thanks to brushless EC motor (not 070243).
With Electronic Motor Protection (EMP) and Electronic Cell Protection (ECP).
LED light to illuminate the working area and battery charge display.
Multi-stage torque setting for precise screw driving.
Electronic speed control for precise drilling and screw driving.
Softgrip.

Outstanding available and comfortable handling due to compact design. Motor brake for precise work.
suitable battery - supplier / battery type / voltage: Bosch 18 V
Manufacturer's designation: GSR 18V-21
Motor design: 4-pole DC motor
Battery capacity: 2 A·h
Battery voltage: 18 V
maximum torque soft: 21 N·m
maximum torque hard: 55 N·m
Speed range 1st speed: 0 min-1 - 480 min-1
Speed range 2nd speed: 0 min-1 - 1,800 min-1
Quick-clamping chuck range: 1.5 mm - 13 mm
maximum twist drill size ⌀ in steel: 13 mm
maximum twist drill size ⌀ in wood: 35 mm
Weight: 1.7 kg
maximum vibration to EN: <2.5 m/s2

Chip collection volume: 110 l
Extraction duct inlet outside nominal width: 203 mm
Extraction duct outlet outside nominal width: 1 x 100, 1 x 120 mm
Length approx.: 1000 mm
Width/depth approx.: 500 mm
Height approx.: 2100 mm
Weight approx.: 39 kg
Idle Speed: 2950 min¯¹
Motor input: 1.5 kW
Supply voltage: 230 V
Mains frequency: 50 Hz
Filter surface area: 1.92 m²
Max. sound pressure level: 85.7 dB(A)
Rated volume flow: 1900 m³/h
Max. negative pressure: 1700 Pa

Powerful all-rounder with high suction power, compact construction, hose storage and accessory holder on the device. Automatic shutdown once the tank is full.
The flat pleated filter allows the water / dust suction to be switched immediately without removing the filter.
The Tact automatic filter cleaning system enables uninterrupted work, reduced maintenance costs and a long filter life.
The central control button allows you to switch from one suction program to the other.
Robust 30 liter tank with bumpers and metal steering casters.
Wet / dry vacuum cleaner with electric price and automatic start for electric tools.
Adhesion resistant PES cartridge filter.
Manufacturer no .: NT22APTE
Power supply: Mains operation
Power consumption: 1'300 W
Container volume: 22 l
Nominal dimensions of fittings: 35 mm
Length: 380mm
Width: 370 mm
Height: 480 mm
Suction hose length: 1.9 m
Cable length: 6 m
Number of Engines: 1
Air volume flow: 71 l / s
Vacuum: 255 mbar
Sound level: 72 dB (A)
Automatic switch-on system: yes
Filter cleaning: ApClean semi-automatic filter cleaning
Dust class - vacuum cleaner: L
Weight: 6.1 kg
Filter systems: Cartridge filter

230V/1100W/7.5A, 570-890 m3/h, dimensions 1200/600/H1'380mm

also referenced under: OOMADUSTAS01, CRM 107

Length approx: 705 mm
Width/depth approx: 655 mm
Height approx: 900 mm
Weight approx: 71 kg
Drive motor output 1.1 kW
Supply voltage: 230 V
Mains frequency: 50 Hz
Max. extraction performance: 950 m³/h
Extraction arm type: Hose design
Filtering process: 3-stage
Area approx: 13 m²
Sound pressure level: 72 dB(A)

380V, 2200W, 3000rpm
with dust collector

including Rollabout Tray with integrated Blister Forming frame cradle
Heating with 18 Infraredt-Quartz-Tubes, Dual-Zone switching (6/18), Temp.
measurement of the Material surface by opto-electr. IR-sensor, infinitely adjustable
from 30 C to 250 C by SPS controller with PID feature, Software build 3.x with
maintenance info, programmable Ramp- and Timer-feature with an option to store
slowly raising heat processes, monitoring of the heating process by graphical trend,
tefloncoated (replaceable) Rollabout Tray, 4 casters with stop, height adjustable by
gas-shock (min. 820mm, max. 1050 mm), integrated Blister forming cradle, width
adjustable, retractable when not in use, vertical Frontdoor with double pane Window,
double gas-shock supported, Illum. by two 25W bulbs, integrated Pre-Preg hose duct
at the left side,
colour: RAL7035 (light-grey) / RAL7031 (blue-grey), net weight 290kg
Electr. Conn.: 380-400V / 50-60Hz / 3Ph. / 8,5kW (CEE 3x 16Amp.)
Dim.: outside HxWxD: 1400x1595x1270 mm
inside HxWxD : 500x1300x1090 mm

including Rollabout Tray with integrated Blister Forming frame cradle
Heating with 12 Infraredt-Quartz-Tubes, Temp. measurement of the Material surface by
opto-electr. IR-sensor, infinitely adjustable from 30 C to 250 C by SPS controller with
PID feature, Software build 3.x with maintenance info, programmable Ramp- and
Timer-feature with an option to store slowly raising heat processes, monitoring of the
heating process by graphical trend, tefloncoated (replaceable) Rollabout Tray, 4
casters with stop, height adjustable by gas-shock (min. 820mm, max. 1050 mm),
integrated Blister forming cradle, width adjustable, retractable when not in use, vert.
Frontdoor with double pane Window, double gas-shock supported, Illum. by two 25W bulbs,
colour: RAL7035 (light-grey), net weight 230kgs
Electr. Conn.: 400V / 50-60Hz / 3Ph. / 5,9 kW (CEE 3x 16Amp.)
Dim.: outside HxWxD: 1420x1320x970 mm
inside HxWxD : 500x1000x800 mm

Stainless steel housing inside, spray paint outside, Heating with 8
Infrared-Quartz-Tubes, Temperature measurement of the Material surface by
opto-electr. IR-sensor, infinitely adjustable from 30 C to 250 C by SPS controller with
PID feature, Software build 3.0 with maintenance info, programmable Ramp- and
Timer-feature with an option to store slowly raising heat processes, monitoring of the
heating process by graphical trend, Double-Frontdoor with double pane Window, 2x
25W Illum. bulb, 1x tray with teflon
colour: RAL7035 (light-grey) / RAL 7031 (blue-grey)
Electr. Conn.: 380-400V / 50-60Hz / 3Ph. / 3,7 kW (16 Amp. CEE)
Dim.: outside: WxDxH: 900x700x920 mm
inside: WxDxH : 810x580x540 mm
net weight: 133 kgs

Suitable for deep-drawing technology with outer rings and to dry plaster models, with 2 ventilators for uniform warming of plastic sheets, with steel support frame and a storage shelf for plastic sheets, with viewing window and space-saving opening mechanism, with interior illumination and electronic heat regulation. Complete heating cabinet, inside and outside made of stainless steel with an alu sliding shelf, covered in Teflon foils blanks, on ball-bearing mounted rollers.
Delivered with spare parts for 2 years

Technical data:
Exterior dimensions W x D x H: 1450 x 1480 x 1500mm
Interior dimensions W x D x H: 1200 x 1270 x 500mm
Working surface W x D: 1100 x 1030mm
Temperature range: 30° C - 200°C
Power requirements: 400 V / 50 Hz / 4,5 kW
Weight: 280kg

also referenced under: OOMAOVENCR50G, CR5000G

400V, 1.2kW, volume 40m³ / h, 25L tank